Your partner for innovative solutions in toolmaking and plastics technology From development and design to toolmaking and series production of high-quality injection-molded parts — we offer everything from a single source. For over 30 years, we have been designing and manufacturing injection molding tools weighing up to 40 tons and are proficient in all relevant technologies of modern injection molding technology. Our particular strength lies in producing molds for sophisticated visible and decorative parts with first-class surfaces. For this purpose, we use MuCell, gas pressure and polyurethane processes, among others. We produce foam, floor, multi-component, press and PUR tools for a wide range of applications — whether non-visible parts or high-quality visible parts such as high-gloss or open-pore decorative elements made of wood, carbon or aluminum. As a reliable development partner, we support your product throughout all project phases — from initial idea to series production. In our own technical center, we carry out tests, optimizations and final tests and thus ensure the highest quality.

Tailored solutions in contract and assembly manufacturing, handling systems, special machine construction and industrial technology with first-class service from Münsterland.

We are your system partner for assemblies with components from our plastic injection shop and our stamping shop. We have a great deal of vertical integration at our location in Weinstadt near Stuttgart. Our production is optimally designed for quantities of 1 to approx. 800,000 pieces/year. We are also happy to integrate processing processes and components from our or your partners into the value stream in a process-reliable and economical way. Based on a proven approach, we offer you innovative solutions from a single source.

Gädigk Feinmechanik & Systemtechnik GmbH is a company with over 25 years of experience in the design and manufacture of precision mechanical components and assembly devices. The company offers solutions in the areas of automotive, measurement technology, research and medical technology. The services include the development, production, assembly and control technology of complex systems, including prototype construction and series production. Gaedigk is particularly specialized in tailor-made, precise mechanical components and offers a full service from the idea to the finished product.

We produce modern stamping and bending machines Flat springs, hinge springs Contact springs, locking and clamping springs Here we can draw on a century-long experience that you also can use for your problems and questions. Our own tool provides the flexibility of our production facilities. We guarantee a consistently high quality of our products with a careful manufacturing and final inspection by individual testing equipment. Regular undertaken by the customer product audits and supplier assessments have repeatedly confirmed the high level of quality and delivery reliability. Our clients include major companies in the automotive, lighting and electrical industry as well as the furniture fitting and camping industry at home and abroad. We manufacture the following materials: - Stainless spring steels 1.4310, 1.4301, 1.4568 according to DIN EN 10151 - Phosphor bronze strip Cu Sn 6 according to DIN EN 1654 - Beryllium copper Cu loading according to DIN EN 1654 - Brass band Cu Zn 37 according to DIN EN 1652 - Aluminium AL MG SI according to DIN EN 485-4 - Surface band (egB. silver plated) - Spring steels grade C 60 S, C 75 S according to DIN EN 10132-4 - Spring steel round wire rolled grade C 35, C 45 according to DIN EN 10016-2 Execution: Thickness: 0.10 to 3.50 mm Width: 1.00 to 80.00 mm Edges: cut or rounded off. On request we can with renowned Lohnveredelern surface treatments each Make way.

Our company, Voulgarelis Tooling, was established in Athens, in 1983. The founder, Athanasios Voulgarelis, had gained valuable experience as a mould maker, by working for more than a decade, for well known American and Canadian toolmaking companies. In September 2002, we moved to our new, spacious workshop, conveniently located in the heart of the industrial area in Peristeri, an area easily reached, close to Metropolitan Athens, its nearby vicinities and the port of Piraeus. We are an ISO 9001∶2015 certified company. Our core manufacturing capabilities include: - Toolmaking for injection moulds - Toolmaking for HPDC aluminum and zink - Injection moulding for small to medium production - Hot chamber Die Casting - 5-axis machining

As a long time supplier to the aviation and aerospace industries in the area of metal cutting, we can assert ourselves as a reliable partner of major air carriers. Through the use of innovative milling strategies as well as modern manufacturing machines in 5Axis area with associated automation systems, we achieve a high throughput and guarantee our customers consistent high quality. Established as a mechanical workshop at 01.04. 1973, we produced the first, Feierabend operation 'in the center of Stutensee-Blankenloch. Over the years, we expanded our production facilities as well as the machinery to now 20 processing centers located in the industrial area of Stutensee-Blankenloch. Through the use of modern technology we are able in the future to meet our customers to meet. You can find information about the past here

For more than two decades, we meet innovative and reliable the wishes of our customers. Whether solar industry or aviation and space technology - our expertise is in demand in various industries. And in a variety of situations: They have capacity constraints? Congratulations! We're here to help: Even with small numbers or short-term orders, you can rely on the high quality and punctual contract manufacturing Mobitec. Philosophy Our customer understanding is holistic: We Mobitec want you to feel completely comfortable. That's why you get from us next to a clever system of course accurate measurement protocols, high-quality tools to make informed and personalized advice, a competent 24-hour service. Where - of course that's not natural. But this is precisely the Mobitec philosophy. Innovations Do you have special requirements and want no technology off the shelf? Welcome to Mobitec.We take the time and advise you personally, individually - and honest. The trustful environment that we maintain with our customers is the best basis for the pioneering machine solutions that we design and produce for more than two decades. We specifically cater to your desires and create standard modules flexibly according to your needs. If necessary development work, then you rely on the innovation of our expert team - the next bend we have for you already know the right innovation at hand. Industries Mobitec strikes the arc and has worked for a variety of industries. Our well-known, challenging customers come from the automotive industry, the furniture industry, solar technology, climate and heating technology, medical technology, aviation and space technology, and of course special areas. With all we share a trusting, with many a long-term partnership in which we are all so hinbiegen, as only an experienced, certified A-supplier.

CNC turning; CNC milling; mechanical assembly production. Prototypes, small series, large series up to batch sizes of 2000 pieces

Arso Pump is a family owned company.

X-Steel BH is a company that deals primarily with milling and turning services of different types of materials. In addition to milling and turning services, it offers welding, assembly, development and other engineering solutions. We can offer anodizing, powder coating, galvanizing, black oxidation, nickel plating and various other metal protection services. We are at your disposal for all questions

Since 1998, we have been manufacturing turned parts in various diameters of 8 to 62 millimeters in the materials you specify here in Weilburg an der Lahn. Aluminum, brass, steel or stainless steel — all with the tightest tolerance requirements and sometimes difficult surface requirements. Would you like smaller quantities or would you like to view sample series in advance? Talk to us — we will make this possible for you, if necessary with partners. We always strive to meet the requirements of our customers. We are also happy to answer any other questions you may have about our products, services and offers. All-round service is just as important to us as the precise production of the desired turned parts, mainly in large quantities. Your satisfaction is our goal!

1915: Founding Maschinenfabrik Berger was founded on 27.10.1915 by Ludwig Berger. The company's headquarters have always been located at Wienerstraße 35 in Knittelfeld. From the beginning to the end of the 1970s, in addition to special structures for various industries, machines were mainly produced for processing and transporting wood. 1950s: Development of two series products In the 1950s, the machine factory succeeded in developing two “real” series products: A motor-driven loom for producing reed mats and a press for pressing reeds into insulation boards. By the 1960s, these were produced in quantities of over 200 and exported to Iraq and Egypt. Spare parts for the robust and durable machines are still being manufactured today. 1980: Departure of the company founder After the death of Gustav Berger, the son of company founder Ludwig Berger, the company was taken over on 1.7.1980 by 2 Lower Austrian industrialists — Mirko Kovacs and Franz Mock. 1980: First collaborations with IBS Austria GmbH The machine factory has also been working with IBS Austria in Teufenbach since 1980. Initially, long grinding machines for ceramic drainage surfaces were developed together. As a result, components for paper machines made of stainless steel were also delivered to IBS Austria. 1993: Takeover by IBS Austria GmbH In 1993, Maschinenfabrik Berger was taken over by IBS Austria GmbH — with owners Heinz and Klaus Bartelmuss. At that time, the company had 40 employees. As a result, the production focus was consistently focused on components for the paper industry. With increasing sales, the machinery was successively renewed and expanded. At that time, a 5-axis long milling machine was already in use, which could process workpieces weighing up to 10 tons and an accuracy of 1/100 mm. Today: Modern, dynamic company with annual turnover of 20 million Today, Maschinenfabrik Berger stands for the highest quality of machine components for the paper and pulp industry — worldwide! With an annual turnover of around €20 million, the company is a modern, dynamic company that processes around 1,000 tons of stainless chrome-nickel steel annually using state-of-the-art machinery. A dedicated team, consisting of over 100 highly qualified employees, ensures smooth processes and the highest quality of execution.

Whether big or small — we are your partner for powder coating in industry, mechanical engineering and metal construction. Clear, strong, Nordic. Since 2015, Hanseschicht GmbH has been your competent partner for high-quality powder coatings in and around Hamburg. As part of the renowned Krebs group of companies, we offer tailor-made solutions for industry and trade. Today, we are leaders in northern Germany. In addition, we can also provide all logistical services related to your order as a general contractor.

Founded in 2018 in Brasov, Romania, S.C. Machro Technology S.R.L. is a high-precision processing company with 100% Romanian capital, specializing in the machining of aluminum alloys, steel and non-ferrous materials. With a strong portfolio of international clients and modern equipment, we are a trusted partner for companies in Germany, Switzerland, and France, serving critical sectors such as pharmaceuticals, aerospace, and marine.

WiggenTech GmbH is an owner-managed family company based in Lippstadt. Our company focuses on the development, production, coating, trade and sale of fasteners for customers in the industrial and automotive sectors. WiggenTech GmbH successfully became independent by spinning off the in-house turning and drilling company of Hella Kg.a.a. as part of a transfer of operations in accordance with §613a in 2021. As a “start up”, we can therefore already draw on decades of “know-how” in the production of complex fasteners. Every year, we produce around 15 million precision turned parts, which are used as fasteners by various vehicle manufacturers, automotive products and in industrial applications. We are particularly proud of this. With their expertise and innovations, our employees form the foundation of the company and guarantee our current and future success.

Our medium-sized family business offers more than just “plastic injection molding”. We support you from the initial idea to series production and support you with our expertise and 40 years of experience. With almost 60 employees, we serve a wide range of customers and produce a wide variety of technical plastic injection-molded parts, from tiny connectors (0.02 g) for the medical industry to housings (up to 400 g), e.g. for the electrical industry. Our many years of know-how in the construction of injection molds are used, e.g. for insert/outsert technology, the reel-to-reel process and the implementation of technologies such as gray space manufacturing, internal gas printing or multi-component technology. ... more advice We advise your product development on implementation, plastic-compatible design and feasibility right from the early stages. ... more mold making We build your tools in our own tool shop and also maintain them there. We can implement changes or corrections at short notice. ... more components We take care of the further processing for you and deliver the injection-molded parts, e.g. assembled, balled and printed in your desired packaging. ... more automation Our own automation system designs the optimal concept for your component, from small series to large orders.

TEBIT - The Medical Group Since 1988, TEBIT has stood for innovation, precision and quality in medical technology. With around 100 employees, we develop and manufacture high-quality components, systems and implants — from prototypes to series production. skills ✅ Development support & prototyping ✅ Series production ✅ DIN EN ISO 13485 certified ✅ High-precision manufacturing (stainless steel, titanium, aluminum) ✅ Additive manufacturing & surface finishing Our strengths High-tech machinery (5-axis, multi-spindle machines, long turners) Quality & traceability ISO class 7 cleanroom — cleaning & sterile packaging Assembly of complex components including functional tests Flexible logistics & custom packaging Focus markets medical device manufacturing dental technology traumatology Security & defense company data Zum Schnüffel 6, 58540 Meinerzhagen, North Rhine-Westphalia Contact person: Jonas Wintersohle www.tebit.de +49-2354-9295-102 | j.wintersohle@tebit.de

The company DEMA precision parts is a global family. Together with your Swedish subsidiary MARCUS, is DEMA precision parts for 25 years guarantee for quality connection technology. Dema precision parts GmbH has specialized in addition to the production of certain standard parts on a special group of fasteners, parts and assemblies according to customer drawing for the automotive, aerospace, and mechanical engineering. Our services are complemented by the product range of the company NOSTA. As a sister company of DEMA offers NOSTA products from the passport and disc springs, nuts and CNC machined parts supplier.