Custom-Made Solutions for Individual Products In accordance with customer demands and wishes, ISOVOLTA – in addition to manufacturing high-quality laminates in the form of sheets, tubes and rods – also offers processing of thermoset materials. Different materials are shaped by processes such as cutting, grinding, drilling, turning, milling, gluing, mounting, punching, jet cutting or painting according to individual customer specifications. Based on our expertise in material-specific selection and production-technical implementation as well as our years of experience in job shop, serial, and mass production, we are able to develop the best possible process for each product. Range of Materials Phenolic Cellulosic Paper / PFCP Phenolic Cotton Cloth / PFCC Phenolic Glass Cloth / PFGC Melamine Cotton Cloth / MFCC Melamine Hard Glass Cloth / MFGC Epoxy Glass or Glass Roving Cloth / EPGC Epoxy Glass Mat / Polyester Glass Mat / EPGM / UPGM Melamine-Lined Hard Paper / MKHP / INBORD® Silicone Glass Cloth / SIGC Special Laminates / Special Materials / CFRP, KP, PIGC MAGNOVAL® CONT AVAL® GX_11.3309 GWS RP High-Performance Rings GF-UP / GF-EP ISOVAL® R-AL Competence in Soldering Equipment Soldering Frames are primarily used to transport PCBs in soldering machines while simultaneously fixating “through-hole components” by using Top Hat Systems. With our specially developed ESD material, which is able to endure high temperatures and chemical resistance, the ISOVOLTA Soldering Frames are able to withstand thousands of soldering cycles. ISOVOLTA Soldering Frames and masks are custom-made innovative products. The design of the mask is defined by the PCB, the machine and the customer`s requirements. Possible combinations of the ISOVOLTA Universal Frame, ISOVOLTA Soldering Frame and the ISOVOLTA Flexible Suppressing System. (ISOVOLTA Suppressing System: ensure suppression and alignment of critical PTH components.) Combination ISOVOLTA Soldering Mask and ISOVOLTA Suppressing Panel for reliable and accurate alignment of PTH components. Innovative solutions guarantee quick and comfortable handling. Product combinations Top Hat Systems Universal Frames Flexible Top Hat System Magnetic Carrier Coating Frames Pressfit Tools Router Tools Hand Soldering Tool

We are a company with a tradition since 1900. Around 100 years experience in plastics technology coupled with the most modern manufacturing techniques make Kümpel for the first point of contact for custom-made acrylic glass solutions for demanding industrial customers. As one of the world's first Verabeiter of PLEXIGLAS ®, we have a comprehensive know-how in the field of plastics processing and are among the pioneers. Today we are able to solve complex problems of our international clients individually through the use of different plastics. We use plastic plates; blocks; tubes; rods in clear or colored, such as PMMA; PLEXIGLAS ®, PLEXIGLAS ®-Satin DC, SC; PLEXIGLAS ® LED; PLEXIGLAS ®-Endlighten; PLEXIGLAS ®-Heatstop; PLEXIGLAS ® flier material; PLEXIGLAS ®-Solari material; PLEXIGLAS ® Optical-HC; PLEXIGLAS ® RESIST; MACROLON ®; MACROLON ®-multi UV; MACROLON ®-AR; Lexan, PC tubes, mirror, PETG, PETG DIN 4102-B1; VIVAK; Axept , PVC, soft PVC Astra glass; PA; POM; PTFE; PEEK, HP, HP-2061.5; HWG, EP GC 203, PC film; KASI ®; Whether according to sample or drawing - dude produces finished parts for all applications of the highest quality. When it comes to plastic materials and their processing, such as: - Cutting, drilling, milling, turning, polishing, gluing, molding, printing and laser cutting goes, you are the right place! On our website we provide you with an overview across our services. We are available at any time for an individual consultation.

EWOQE was founded in January 2021, starting with a single machine. By 2024, the company had developed into a team of four highly qualified employees from the region and now operates around 90 machines. We now provide our customers with a wide range of additive manufacturing techniques to meet their diverse needs. - FDM / FFF [* commercially available filaments from Spectrum and extrudr] - SLS [PA12] - SLA [all * commercially available resins from Formlabs] - MJF [PA12] We source our materials and raw materials exclusively from renowned companies to ensure continuous quality. EWOQE collaborates with various companies in the field of industrial manufacturing. Our work in the field of large format printing deserves special mention, as we have been able to support renowned players from the fields of art, culture and politics as well as public institutions from the initial idea to the completion of the project.

The Dr. Dietrich Müller GmbH, based in Ahlhorn (Lower Saxony), has long proven itself as a successful service provider for the manufacturing industry. The focus is on the development and implementation of customized solutions for the manufacturing processes of the respective partners. The Dr. Dietrich Müller GmbH is one of the world's largest suppliers of electrical insulation materials, seals and heat conducting products. The company is certified for quality management according to ISO 9001 and listed as a recognized repackager by UL. This means that all UL-approved materials retain their approval. Solutions for motors and generators We develop, manufacture and supply flexible and rigid electrical insulating materials for motors and generators using materials from leading manufacturers worldwide. All insulation parts can be supplied by us. Solutions for air and oil cooled transformers The insulation system is crucial for the service life and functionality of oil transformers and dry-type transformers.We deliver ready-to-install individual parts and kits. Solutions for electronic products In addition to electrical insulating materials for electrical insulation, we develop, manufacture and supply products and systems for cooling electronics, particularly in the fields of medical technology and aerospace. Solutions for mechanical engineering and vehicle construction Composite materials are becoming increasingly widespread in mechanical engineering and vehicle construction. We support in the development and manufacture of ready-to-install parts and systems. Solutions for batteries and accumulators We supply insulating films, battery separator films and thermally conductive materials. Support for research, development and universities With the multitude of manufacturing processes and available materials, we are the right partner for solving your challenge. We process ul-approved materials from leading manufacturers.

3D-Konstruktion Bayerlein GmbH is an owner-managed family company with decades of experience in the field of printing, pressing and injection molding tools. Starting in the area of design, the company has matured into an all-rounder in the field of tool and mold making through continuous growth and development. By constantly investing in new technologies and machines, we are able to implement our customers' ideas in the highest quality on time. Due to the high level of commitment and flexibility of our employees as well as the necessary know-how, we are able to efficiently implement the increasing individualization of your components. Small to medium-sized series production of components is no problem thanks to our automatic changeover machines. Our core business is the design, development and manufacture of die, press and injection molding tools. Thanks to our 5-axis milling technology, we are also ideally positioned for HSC contract manufacturing.

Our company is located south of Budapest, in Pest County, in an industrially and economically strategic area. The high demands arising in custom or mass production are guaranteed by our company's many years of experience and in-depth knowledge of modern technology that supports processing. Our team consists of highly skilled professionals, and we carry out our work in an organized manner, meeting deadlines, at competitive prices, and in compliance with quality standards.

metalworking, CNC milling (5-axis)

Middle class firm with currently. 25 employees. Machining of turned and milled parts up to 3000 mm diameter and up to 12 tons unit weight. Single-part and small batch production in two shifts.

The SITEK AG is a dynamic and reliable companies in the industry. It produces high-quality plastic parts and associated tools for a demanding clientele. We want to contribute to the long term success of our clients and work in partnership and permanently with you. Our mature parent-form concept enables you to relate complex plastic parts for small and medium series at affordable conditions, yet in Swiss quality. Together with you, the customer, and also with our suppliers as partners we are able to offer far more than just a plastic part in the situation. We see ourselves as a provider of total solutions from concept to the finished packaged assembly. Bützer assumes responsibility for protecting the environment and the health and safety of our employees by appropriate action. We ensure the development and independence of our family business fair profits which are reinvested at a substantial part of the company's progress. Part Sprektrum: - Housing, Housing - Cover, cover - Transmission cover - Pump housing - Display window - Cover, aperture - Gears, gear - Box, container - Hinge Range of machines: - Krauss Maffei - Arburg - Ergotech - Negri Bossi - Fehlmann - Agie - Charmilles Technologies: - Injection molding, injection molding, plastic injection molding - Ultrasonic Welding, Ultrasonic - Hand assembly, installation, assembly, screwing, plugging, clips, Klippsen - Insertion, insertion form - Bonding, potting, bonding - Coating, painting, electroplating - Mold design, mold - Die-sinking EDM, sinker EDM, wire cutting, wire EDM, Wire EDM Range of materials: - PEEK, Victrex - PA, Ultramid - PE - PP - PBT, Ultradur - POM, Delrin, Hostaform - PET - PSU - PPS, Fortron, Ryton - PPO - ABS, Cycolac - PC - PMMA - LCP, Vectra - PEI, Ultem - P

Manufacture of patented computer workstations suitable with extendable and retractable monitor again for the area schools and educational institutions, but also for the office Supporting Contract manufacturing in the production of, for example, quality office furniture, in the field of shop equipment, property and stage construction of prototypes or mockups of the aircraft is our strength Our focus is on the materials: melamine faced chipboard (FPY), laminates (HPL), laminated composite plates, multiplex (MPX), medium density fiberboard (MDF), OBO-hard wood, ABS and solid wood edges Editing is done with the following technologies: Blanks with cutting optimization (saw) by panel- Edge banding (ABS and Furnierumleimer to 3 mm) to form milled parts using CNC Standard edge banding along cross from 0.4 to 8 mm ABS and real wood edge 4-axis CNC machining, 5 Axis with Flex 5 Milling, drilling, sawing by CNC Other offers from us are: - Editing and create CAD drawings - Assistance in project management - If required, a visualization before production start - Create the CAD drawings as specified

Company Innoflex has as start-up companies a CNC woodworking machine and two gypsum-cardboard Frese machinery We, currently have spare capacity for series production in the field of wood and gypsum-cardboard panels-Verarbeitung.Unseren future customers we provide now a timely, competent and reliable production about.

Plastosteel d.o.o. is a family-owned Slovenian company specialized in precision machining, welding, and mechanical assembly of metal, plastic, and other technical materials. With roots dating back to 1999, our company has grown from a small workshop into a reliable and flexible production partner. In 2021, we transformed into Plastosteel d.o.o., and in 2022, we moved into new production facilities and expanded our machine park. We support our customers with: CNC turning, milling, and grinding MIG and TIG welding Mechanical, pneumatic, and hydraulic assembly CAD development, reverse engineering, and custom construction Coordination of heat and surface treatments through trusted partners We are capable of handling single-part production, technical prototypes, and series manufacturing – with a strong focus on customized, high-precision components. Our small, highly skilled team combines speed, precision, and personal commitment, making us an ideal partner for demanding and fast-paced projects. We are currently in the process of obtaining ISO 9001 certification to further strengthen our quality assurance. We are open to new collaborations across Europe and ready to support customers in various industries – from mechanical engineering to automotive and equipment manufacturing.

OKUTEC is a medium-sized company with 15-20 employees for the manufacture of turned and milled parts made of engineering plastics. We are Kunststoffzerspaner and -Turn Milling Saws Drilling or mount it to your specifications. After drawing, standard or sample parts are as Manufactured individually or in volume quantities.

UNIFY KFT is a Hungarian subcontractor supplying CNC machined and precision turned parts for automotive, machinery, enclosure and other sectors. Serial and single part production also possible. Components produced include, for example, jigs, gauges, fixtures, tools for production lines, forged flanges of oil coolers, v-belt pulleys, special screws, inserts, spares, machined alu profiles and other parts. The company has an extensive machine park and can process most metals and technical plastics with providing high quality products at competitive price along with engineering service. We have rich experinces in producing parts made from PEEK. The company operates under EN ISO 9001: 2015 which is certified by Bureau Veritas Hungary Ltd.

DMaier GmbH is a family business with decades of experience in the metal industry. We provide customers with high-quality products and provide excellent customer service. Modern technologies enable us to achieve even more precise results by simplifying and automating our processes. Our company was founded over 25 years ago and has grown steadily since then. We are proud of our many years of experience in the metal industry and our reputation as a leading provider of high-quality products.

Weinmann is primarily for quality in small and medium series. But Weinmann is also diversity. Diversity in the processing of different materials such as stainless alloys, copper, aluminum, titanium or plastic. Diversity in the ways of module assembly. Diversity in the processing options and parts Dimensions: * Large diameter up to 250 mm * Great lengths to 1000 mm * Complex geometries * Micro turned parts * Revolver and rotational parts * Frästeile A diversity that makes you much easier. Especially when * Need many different parts * Change your parts often Block * all part families * Need "outliers" or special products.

Plastic injection molding, mold design, development, plastic-oriented design, tool design, Sensors and Elektronikumspritzung, automotive, furniture,

Aachener Zerspanungstechnik is a young and dynamic company that provides precise CNC machining solutions for various industries. With an experienced team of machining specialists, CNC programmers, and machine operators, we combine expertise and passion to perfectly meet our customers’ requirements using state-of-the-art technology.

WOOD DROPS CNC / Laser Technology Looking for the right partner when it comes to milling or laser machining in detail. With us, a young dynamic team deals with all your needs, to meet all the requirements at the highest level. WOOD DROPS accompanies you throughout the entire implementation, from the idea to the concept, from prototype through production, mass production, the elaboration of the design to the finished product. With our modern machinery and the expertise of our engineering teams, we have been perfecting all your plans. Contact us with your project and make you feel good advice in a family atmosphere.

Specialists in plastics processing. We realize components on customer's design. Turning, milling, shaping, polycarbonated bending, partial assembly of equipment, quality control. All our processing is free from chemical agents and all our components are not contaminated by lubricants.