M & K Machine & Components GmbH Text About M & K Your powerful partner from design to finished product The company M & K GmbH is a young company with 30 employees and 2650 square meters of production area in Bopfingen. We are manufacturers of transportation equipment, special purpose machines, parts and steel structures and assemble them also. We respond individually to the needs of our customers. Our capabilities in addition to the construction of complete machines and apparatus according to the drawings of our customers also includes the small batch production, the individual production and the prototype in tool making. The welding of all common steels, stainless steels and aluminum alloys, as well as repair welds in the house or on site are part of our scope of services, such as turning, milling and drilling with innovative Cutting Technology.

Smelting: We manufacture steels for cold, hot, and high-speed working as well as stainless, acid-resistant, and heat-resistant steels. One-off and custom analyses. Powder metallurgy based or ESR remelted Forming: Grades of steel with the following dimensions: 18 to 300 mm (round and square) in widths of up to 500 mm; height at least 10% of the width. Rings and disks: 100 to 700 mm in diameter. At all stages of processing, for example, turned, shelled, over-milled, or ground. Tools & dies: We manufacture tools and dies for noncutting forming, special dies for cold and hot forming, tools for hydroforming, wear resistant tools for the refractory industry, and forming dies for mechanical engineering

APO engineering GmbH Specializing in workpieces with a high degree of difficulty, Components for water jet high pressure applications, Devices and clamping systems. APO supply on request constructions. We design, plan and build for you in the field of cleaning plant, in the high-pressure technique, the test bench as well as in clamping technology. We also supply a wide range of quality products in the areas of handling, clamping technology, gripper systems and precision parts. APO. Over 20 years experience in the high-pressure and water jet technology. Seek advice from specialists.

MARIK Enterprise is a company located in Ferrara near the Motorway A13 in two warehouses, covering a total area of 4000 square meters. 19 employees working in factories cleverly divided into several working departments. The division into departments of production has been formed over the years to consolidate the business objective to provide finished parts complete with all the processing steps that is ready for assembly. This choice, or to specialize in providing complete and not on a single processing stage, was originally a necessity, due to the very poor fabric of the area, but over the years has become the distinctive feature and raised in Marik compared to the competition because it allows to reduce costs, the lead time and to improve the service and the final product. This also means that, although working under contract, the company is not a simple sub-supplier, but a major partner for those companies wishing to use more energy into marketing their product without having to worry about the appearance of production. The main product that realizes the Enterprise Marik is the steel shaft in all its variants: worms, sprockets, from trees to trees from electric motor pumps, keyed to the shafts by pins to ball screws. In recent years, then grew the experience in the construction of gears (gears) of modules especially important. The production is aimed primarily at small and medium size series of medium-heavy, but is perfectly capable of absorbing the large number being technologically advanced and automated well. Finally, the technical office established in 2006 to study the orders at the order constituting the cycle, and better support the customer during the development of prototypes or propose solutions for improvement in case of production standards. To ensure its products, Marik, has within it a standard room with CNC measuring machines that allow them to certify its product based on customer specifications. In three words Marik is TECHNOLOGY EXPERTISE AND SERVICE.

The team of mesterCADők was founded 15 years ago, and has met challenges of custumers since that time. Engineers have got experience in automotive industry regarding construction , production, quality system and assurance. The team of mesterCADők has had purposful experience in manufaturing also. Our main activity 1.: serve the companies producing cable harness for cars with device manufacturer and test equipment by the help of CAD, high quality manufacturing and assembly of mechanical electrical and pneumatic parts. Our main activity 2.: design and high quality manufacturing of parts for machine, special tools, appliance made them from metal and plastic. Our main activity 3.: create unique test equipment, for example: ICT for PCB, for mobil phone Other activities: We can performe any metal works and maintenance of machine also. We can correspond to the higher level expectation!

ReBeMo GmbH specializes in the individual processing and assembly of large and small parts for a wide range of industries. We ensure a reduction in your production processes and contribute to their optimization. On over 1,500 m² of production and storage space, we provide 15 employees with services mainly in the areas of aluminum brazing, CNC machining, welding, forming, assembly, storage and picking.

The Center for Laser Welding, grains and engravings in the Stuttgart area. The Reichle GmbH has more than 35 years the competent partner for modern laser welding technology, laser texturing, Narbungen- / repairs and precise engravings for Stuttgart, in Germany and throughout Europe. Moreover, our company also in the fields of surface technology and labels on unique services.

H-TEC Präzisionstechnik GmbH specializes in the high-precision mechanical production of individual parts, small and large series, as well as assemblies and their assembly, made of high-strength steel-aluminum special leads, titanium, inconel, plastics, ceramics, castings and forgings etc. Including heat treatments and surface finishing.

HoFe Werkzeugtechnik is your reliable supplier for special and standard parts of the highest quality and precision. Whether cutting, guide or spring elements as well as gas pressure springs and special special parts according to drawings are included in our delivery program and we can deliver them in the best quality at low cost. Much experience With more than 20 years of industry experience and decades of experience, we convince our strong global partner. Many possibilities We support you with punching, bending and forming tools, as well as with special machine and fixture construction of all kinds with technical know-how. Lots of trust We implement your product - you lower your costs and save time with our short-term deliveries. Almost too easy to be true? See for yourself! From toolmaking to special machine construction - we are more than just a supplier. We are your close and strategic partner with whom you can reduce your costs and save time.

Since 1985 we have been producing high-quality and demanding precision turned and milled parts for a wide variety of industrial applications on computer-controlled machines and assemble assemblies to customer orders. In the field of special machine construction and automation technology, we have been developing customer-specific solutions from a single source since 1982, from user-specific task definition to commissioning and service. In 1992/93 we moved into the new premises at the A23 exit Elmshorn. A qualified and motivated team, decades of experience and state-of-the-art operational equipment give us the certainty of meeting the requirements of our customers at all times, both now and in the future.

We are able to manufacture mechanical parts from the drawing single, small and middle series parts, from our material or from the client’s, using processes of turning, cutting, milling, grinding, drilling parts from ferrous and nonferrous metals. As we have already mentioned in our company’s logo, we are a metal products manufacturing company that strives to find solutions for each client, both in terms of complexity and quality/price ratio. For every moment of existence since the establishment of our company in 2000, we have been doing our best and we always do our best trying to increase the range of services we provide for our partners. We acknowledge the fact that it was not always easy. We are active in the fields of mechanical industry and metallurgy. We have a control department with all the appropriate equipment and measuring instruments. We are able to carry out, in partnership, laser cutting up to 20 mm, as well as plasma and oxyacetylene cutting. We use the following technical equipment:  14 Lathes maximum diameter 180-800 x 1500 mm – 2000 mm;  2 Grinding machines maximum diameter 300 x 1000 mm;  10 Universal milling machines 1200 x 1400 mm;  1 Horizontal boring machine 1000 x 1000 x 500 mm;  5 CNC lathes maximum diameter 300 mm;  2 CNC Centers 1000 x 600 x 600 mm;  2 Welding machines: one TIG and one MIG;  4 Saws maximum diameter 500 mm.

IZW is an independent company, formed in 2020 from the highly diversified Kurtz Ersa group of companies, which can proudly look back on a company history of over 235 years. We are constantly setting new standards and satisfying the requirements of our customers every day. The focus of production is the complete manufacture of machine components with the processes welding, milling, turning and surface treatment blasting, aluminising and painting. Our customers are manufacturers of machinery and equipment from a wide range of industries in Germany and neighbouring countries in Europe.

TechPlasty supply semi-finished products from all kinds of engineering plastics in the form of plates, bars, tubes, tapes, foils, and cuttings. We stock more than 100 tons of widely used engineering plastics ready for immediate delivery. We produce customized parts from engineering plastics through chip machining in pieces, small series and in huge volumes. We produce spare parts or prototypes according to drawings or samples.

The company Furomaro was founded on 2006 as an individual business named "Kereszetes Arpad PFA", which transforms to a local micro company at 2017 (family business). Our experience in machining metal goes back more than 33 years.

Our company - comes with a wealth of experience Unger GmbH & Co KG was established in 1932. Founded by our "company father" Bruno Unger in Leipzig. Having described ourselves as a traditional company for a long time, a completely new production and administration facility was built in the Hellerwald industrial zone in 1986. We are clear about what we have to offer: Decades of experience. And, of course, blades and wear parts for printing and packaging machines, which meet German quality standards in the best possible sense. Unger "family life" - always at the forefront Speaking of the best possible sense, you can count on the "Unger family" to provide all the advantages that a family set-up has to offer: Employees who have been with us for decades, who grow with us and have complete commitment to us and our products. A team that puts its heart and soul into the company and benefits from continual further training and development. And a working environment where motivation and commitment are taken as a given. Familiarity also means that we are always accessible and our customerservice is unsurpassed. We don't feel like a large corporation, more like a small, high-quality traditional company that delivers manufacturing of unsurpassed quality and high standards with fair and transparent pricing. Our production - quality with tradition You can be sure that our team understands its craft. But that's not enough on its own. Our results depend on quality materials. Therefore we offer a wide range of steels - from simple strip steel to high-alloy blade steel. On top of this, our partners supply us with excellent machines enabling us to achieve the best possible results. We also work with custom machines, built exclusively for us. And: What once began in our company as punching technology has now given way to precise laser cutting. This makes us even better. And we want to continue to be so in the future. So we ensure continual quality improvement - by investing in progress, but also innovation, for example, by developing our own identification system which allows us to trace when a blade was produced, at any time. And because we are so keen on quality, we also have products from 3M in our range as a result of taking over the Southern German agency in 2012. You can also rest assured: We carry out cutting trials with every new blade manufactured in-house - this in-house inspection ensures the quality of our products.