We are your competent partner in fluid technology with four locations in and outside Germany - CNC long and short turned parts - Vertical turning - Assembly of final-tested mechanical components - grinding (inside, outside, in the passage etc.) - honing - milling - sandblasting - hard machining Complete machining on modern CNC machines (long and short turned parts, vertical turning) - complex workpieces (from rd3 mm to rd300 mm, vertical turning up to rd150mm) can be produced in batches from 1000 to 100,000 pieces - All steels, case-hardened and highly tempered nitriding steels, stainless steels, non-ferrous metals as well as extruded, sintered and forged blanks can be machined. Our precisely machined and accurately controlled individual parts are assembled with the supplied, controlled external parts and then tested. The end result is tested and perfectly functioning assemblies directly to the customer's assembly line.

Since 1972, the name TOMET MECHANICS has been standing for quality and precision in the metalworking and turning sector. For over 4 decades, the company has been producing high-precision mechanical parts for third party, according to drawings from well-known international customers in the field of electric motors, pumps and submersible motors. Tomet’s machining processes guarantee a complete finished product, from the friction welding phase to turning, grinding, milling, knurling, rotor insertion, rotor turning and balancing. The company’s fleet with over 100 CNC machines used in the production of shafts, starts from the design phase and creation of prototypes up to the customer’s assembly line. The continuous updating of technological production and control systems allows us to achieve high standards of precision and efficiency.

We produce all kinds of turned parts. We mill parts to customer specifications. With our Hurco machining center almost nothing is impossible.

Product portfolio Gears (polished and milled) Timing belt wheels Sprockets Timing belts all brands -Complete drive units

Special screws - this term is a variety of manufacturing and production methods as well as products of the micro screw to the connecting part of a weight of over 50 kg. Our flexible oriented production, know-how and solid growing business relationships with our partners make us professionals in the field of connection technology. As a competent partner we offer our customers not only universality to meet your individual needs, but also demand-oriented supply. We manufacture, depending on the production process, batch sizes from single pieces to large series. The many years of experience in the processing of different materials and the use of future-oriented production technologies - these are our strength. In addition to this, our product range includes Parts of all kinds for our customers as well as with DIN-parts (eg, parallel keys, collars, cotter pin, clevis joints, angle joints, cross and ball joints, spherical bearings) and Metallsigniergeräten on an electrochemical basis and accessories.

Whatever you need - we will deliver it! - The company Gerhard Frister engineering produced in 48 years in northern Germany as a contract manufacturer of complex components for mechanical engineering and industry. Our core competencies are in machining CNC turning, CNC milling, CNC drilling, and component manufacture. In our CNC manufacturing we use the latest CNC milling machines and CNC lathes. Our machining centers are controlled by modern programming systems. The process chain we pursue prototypes to series production for our customers. Prototyping, mold design, mold and jig with its own design and the highest standard you can expect from us. Quality and reliability - for nearly 50 years, these values form the basis for our success. In 1959 company founder Gerhard Frister with only one machine set up its operation. At this time only items were manufactured. Over the years, mass production, fixture and tooling were added.Today our production is working with the latest CNC technology. With these innovative production methods, we managed companies like Miele or Nixdorf to integrate into our customer base. Talk to us about your projects and ideas in order to find the best possible solution for you. With our modern machinery we are able to implement all your needs quickly and efficiently. Our highly qualified team of professionals is at your happy to answer questions! Manufacturing competencies Drilling: Drilling / threading Rotate: Automatic turning (bar) - Combined machining turning / drilling / milling - Conical thread, eg API Milling: Form milling (3D) - HSC milling - milling (2 ½ D) Planing / slotting: Bump Spaces: spaces Sawing / Abrasive Saws

TPV AUTOMOTIVE D.O.O https://www.tpv-automotive.si/en/ CORE PROGRAMMES - R&D SERVICES - COMPLEX SURFACE PROTECTION - ALUMINUM STRUCTURES - HIGH STRENGHT STEEL COMPONENTS - AGRICULTURAL AND CONSTRUCTION EQUIPMENT Brief description of equipment - Stamping on a press with forces from 60T - to 2500T - KTL surface protection, the largest size 3,000 x 800 x 1,500, weight 600kg - Laser cutting of the largest size 4065 mm x 2035 mm, laser power 12,000 W, panel cutting up to 30 mm thick - Hydraulic bending on a bending machine, maximum force 2200kN, maximum length 3000mm - Welding MIG, MAG, FSV, spot, classic manual and robotic welding Jože Pečavar Skrbnik ključnih kupcev/ Key Account Manager Prodaja/Sales TPV AUTOMOTIVE d.o.o. Brezina 101 SI-8250 Brežice, Slovenija Gsm: + 386 (0)31 701 768 Skype: joze.pecavar www.tpv-automotive.si

About AGS Automation Greifsysteme Schwope GmbH. AGS Automation Greifsysteme GmbH, supplies the industry the industry with high-quality gripper construction solutions and pursues the philosophy "Everything ingenious is simple". Three business areas are at the centre of AGS's activities - 1.) the modular gripper system 2) Customised complete grippers and 3) Automation solutions. The modular system, which currently has over 2500 parts, is constantly growing and remains compatible with competitor products. It is based on the positive-locking slot clamping profiles that are widely used on the market. elements such as gripper fingers and suction cups. The PreciGrip prism system, a world first presented at the beginning of 2011, represents a functional advancement. Faster and more precise to assemble, it is the alternative to the previous profile system. Numerous components that have been improved in detail make the AGS modular gripper system particularly user-friendly. Customers who have a gripper system built for their production situation receive a product from AGS that is still orientated towards the standard, but whose innovative details provide productive advantages in practice. AGS GmbH currently employs 45 people.

NTEC is a partner and supplier for tool making company in the field of plastic, pressing and casting technique. The NTEC GmbH offers, in addition to the most common standard parts for mold making, an extensive range of precision flat and tool steels. Let the quality of our advice and our service convince and challenge us.

Turned parts and standard parts to measure - optimal solutions for you! Boehler is the specialist for high quality precision parts and your partner for individual solutions. We cover regardless of the industry the full range of machining Manipulation. Whether you require standard parts or complex Parts: We take care of the procurement, Construction Big and production - reliable, competent and cost-conscious. The extra plus at Böhler: Thanks profound experience we advise you in partnership and offer comprehensive service - far beyond the delivery of your parts out.

The Mayenberger Group is a successful growing group of companies with currently 100 employees and 7,000 square meters production at three plants. As one of the leading suppliers of precision turned and milled parts and system assemblies, we are concerned as a team to offer our customers the highest process safety, to offer at an optimal range, on the subject of machining and engineering. From simple nuts and bushings to complex CNC turned parts and CNC machined parts and assemblies, development, and assembly. For you as a customer an ultra-modern machine park with over 120 turning and milling machines, as well as an extensive post-processing department. Products of the Group Mayenberger move the world. Because wherever precision is required, we are also not far away. Whether in high-quality mechanical vehicle components or electronic assemblies. From general engineering to components for the aerospace industry.Also parts for the medical show that our enormously wide range of machining competence gives us the ability to supply virtually all industries with the entire range of its requirements for turning and milling parts. All this in close cooperation with our customers: find your development and design, your purchasing and quality management in our voice solutions and support to the implementation of your requirements.

Jozef Hargas - HYPERON is a company that can offer complete services in production and sales with refined lines, cable drums and installed cable systems. Our products are, for example, used in manufacture of machinery for the food industry, equipment, Lifting Equipment, etc.. Our company is located in Nove Mesto nad Vahom, a town in western Slovakia in the heart of Europe. Thus we have the possibility of goods - to deliver quickly from Slovakia in all other European countries and back - without border formalities. We guarantee short installation work and have workshops and a specialized laboratory. In mass production harnesses and cables are produced with the assistance of machinery and manufactured in small to medium batch production of cable harnesses by hand. The conductor cross-sections can in the processing of 0.08 mm ² / AWG28 to 6 mm ² / AWG10 lie. Our manufacturing facilities and our staff are available to you. Our work area includes the cable assembly, ribbon cable manufacturing, crimping, cable production, stripping, cable harnesses. In addition, you can use our packing services and much more are available.

In 1992, the brothers founded Dr.-Ing. Peter Schiekel and Ing Gert Schiekel with 12 employees and 3 CNC machines their own business. Quick was a targeted specialization in high-precision machining of stainless steel and other difficult to machine materials. Here, the focus was not on mass production, but on a flexible small and medium series production. This strategic alignment was the foundation for a lasting until today continued growth. About 70 tons of steel in 1997 processed, while in 2007, 300 tons. In a modern corporate building near Dresden with a production area of 1200 sqm, expandable to 2000 square meters, 93 employees work today, and 7 trainees. Our customers come from all over Germany, Switzerland, the Netherlands and Austria. The components supplied by us in stainless / stainless steels work reliably under extreme conditions.They defy aggressive media, mechanical loads and meet the highest standards in clean rooms. Making Use of PLC components include: - Chemical plants and pharmaceutical plants - Biotechnology - Medical - Measurement and Sensor Technology - Food and beverage industry machinery - Energy sector (high-pressure gas systems) - Clean room technology (chip industry), high purity media - Piping systems - A high vacuum and ultra high vacuum - Aeronautics and Space Equipment - Industrial - Gastronomy Manufacturing high quality rotational and Fräskomponenten of stainless steel and difficult to machine materials with finest finishes in small and medium series includingWelding, surface treatment, laser marking and assembly; flanges and other standard parts for vacuum technology, small flanges, blind flanges and centering according to DIN 28403 in stock. Fittings made of stainless steel, special fittings, stainless steel fittings - tube fittings similar to DIN 2993, Pipe Fittings (pipe connectors, tube adapters, connectors for pipes, eccentric pipe reduction) - Valve body - Sensor housing - high pressure components - fittings - plant parts - hose connectors Manufacturing processes: Machining CNC turning and CNC milling and grinding of metal stainless steels, nickel, nickel alloys, titanium, titanium alloys, of diameter 15 mm to 300 mm with inspection certificates, milling 500mm x 1000mm. Materials eg 1.4571, 1.4435, 1.4462, 17.4PH, 1.4542, 1.4548, 2.4602, Alloy C22, Hastelloy B2, 3.7164, 1.4539, 1.4404, DUPLEX, SUPER DUPLEX, INCONEL, 1.4362, 1.4410, 1.4460, 1.4462, 1.4501, 1.4507,

We are a middle-sized production company in the metal industry. Situated in the south of the Black Forest we produce - in a modern setting - and with about 40 employees, precision turning -, milling-, drilling- and grinding parts. One of our strengths is the processing of stainless high tensile and heat-resistant material like, e.g. V2A, V4A, inconel, hastellog, Monel or titanium. A further field of specialisation is the production of decorative turning- and milling parts in aluminium and non-ferrous metal, of a diameter of 30 - 150 mm.

We are there. For machines and people. Our self-image combines the highest technical know-how with the charm of a medium-sized country company. Everyone knows everyone here - and that's how we work. Hand in hand in order to achieve the best possible result as quickly as possible - we rely on the people at EMSO for your satisfaction. We have been a subsidiary of Großbardorfer IFSYS GmbH and part of the JOPP group of companies since 2016.

At M&L Metalltechnik, we attach great importance to providing our customers with friendly and reliable service. We value you as a customer and have made it our mission to deliver high-quality products with a customer-focused approach. M&L Metalltechnik manufactures individual, prototype, sample and series parts for various applications and areas. In manufacturing, we currently work with CNC turning, milling and grinding machines and process a wide variety of materials, such as steel, aluminum, stainless steel, brass, plastics and special materials. Our strengths include the production of very precise and complex components for individual, sample and series production.

We are a machining company operating in the Dudullu Organized Industrial Zone at the IMES Industrial Site, specializing in the production of precision parts. Our company is expanding its customer portfolio day by day. We implement quality control procedures at every stage and can collaborate at target prices. We have never experienced a delay in any of the orders we have agreed upon and do not anticipate any in the future. We are excited to collaborate to contribute to the success of your projects. We would like to arrange a meeting to provide more information and prepare a proposal tailored to your needs.

Munich-based start-up with production at Makerspace Garching. The processing is streamlined across a table, from quotation to production. If required, the project can be supported with CAD/FEM/CAM tools. Preparation of offers from quantity 1. Passionate maker with years of experience in aircraft construction, model making, sports equipment construction, camping and, in future, embedded/mechatronics.

Optimization of manufacturing costs in the machine, metal construction, plant construction and ancillary industries, outsourcing for assemblies, series and individual parts, repairs to machines and plants, provision of services in development, manufacture, assembly of components