The Dr. Dietrich Müller GmbH, based in Ahlhorn (Lower Saxony), has long proven itself as a successful service provider for the manufacturing industry. The focus is on the development and implementation of customized solutions for the manufacturing processes of the respective partners. The Dr. Dietrich Müller GmbH is one of the world's largest suppliers of electrical insulation materials, seals and heat conducting products. The company is certified for quality management according to ISO 9001 and listed as a recognized repackager by UL. This means that all UL-approved materials retain their approval. Solutions for motors and generators We develop, manufacture and supply flexible and rigid electrical insulating materials for motors and generators using materials from leading manufacturers worldwide. All insulation parts can be supplied by us. Solutions for air and oil cooled transformers The insulation system is crucial for the service life and functionality of oil transformers and dry-type transformers.We deliver ready-to-install individual parts and kits. Solutions for electronic products In addition to electrical insulating materials for electrical insulation, we develop, manufacture and supply products and systems for cooling electronics, particularly in the fields of medical technology and aerospace. Solutions for mechanical engineering and vehicle construction Composite materials are becoming increasingly widespread in mechanical engineering and vehicle construction. We support in the development and manufacture of ready-to-install parts and systems. Solutions for batteries and accumulators We supply insulating films, battery separator films and thermally conductive materials. Support for research, development and universities With the multitude of manufacturing processes and available materials, we are the right partner for solving your challenge. We process ul-approved materials from leading manufacturers.

Welcome to the Waitkus PST Waitkus PST presents a practical and technically oriented company with a clear focus on quality and a high level of identification with the tasks required of us. With our services we are working for the engineering, the pharmaceutical industry and the automotive industry. Based on the calculation, specifications and with the help of special software, we work from new product optimization. We differentiate ourselves through flexibility, punctuality, loyalty and quality, as well as our specialization in the field of aerospace, automotive, mechanical engineering and the pharmaceutical industry. Their requirements are what drive Everything we do, we do it with passion. Therefore, we are only satisfied when we have found the right solution for you. In the realization of your dreams and visions you can count on our support. Waitkus PST presents a practical and technically oriented company with a clear focus on quality and a high level of identification with the tasks required of us.

FPL Luhrenberg GbR is a company based near Wiesbaden for the manufacture of 3D components with a focus on stereolithography (SLA) and selective laser sintering (SLS). With our own production, we produce your component data in the shortest possible time and support you in development and pre-series production. We produce for you  Filigree models  Design models  Functional components  Prototypes  Components with the highest precision. With our comprehensive range of different materials and individual color mixes, we offer you the best possible service. From flexible to heat-resistant to resilient finished parts, we support your processes in order to bring you added value right from the start.

About us With our industry expertise, we can help you successfully and promptly implement your production project for mechanical components, assemblies, and housings for small to medium-sized series. For more than 20 years, we have been experts in die casting, injection molding, and other mechanical processes. Our focus is on cross-process thinking. In Germany, Europe and Asia (in-house certified production) we manufacture your mechanical components, assemblies or housings. Our manufacturing services include: Engineering: Technology consulting (wide range of materials and manufacturing processes); CAD evaluation, construction & development Prototyping (close to series production; 1,-3,000 pieces) for die casting, injection molding, precision casting, sand casting, PA casting, vacuum casting, CNC milling, SLS & SLY Series production for batch sizes of up to 25,000 units Metal: aluminum die casting, zinc die casting, deep drawing, gravity die casting, sand casting Plastics: injection molding, thermoforming, extrusion Our Services: Project-related surface finish Coordination of the entire production project Advice along the value chain Assembly service, measurement reports International logistics service

Professional Rapid Prototyping Creation of: Prototypes aesthetic Functional prototypes Preproduction Fixtures, Factory tooling Main fields of application: Consumer Household Aeronautical Rancing Automation Gardening Production of resistant parts, accurate, functional with dimensions up to 914x610x914 mm. Nine material options, it’s suitable for building fixtures, factory tooling and end-use parts, as well as the most demanding 3D prototyping. Materials, including high-performance thermoplastics for biocompatibility, static dissipation and resistance to heat and chemicals (ABS, ABS ESD7, PC-ABS, PC, ULTEM 9085, PPSF).

I offer rapid prototyping services for individuals, for companies, and for all those who need to bring their ideas to life quickly. Great attention is given to the reproduction of all the details that contribute to the birth of a unique product corresponding to your expectations. To bring your ideas to life I use various 3D modeling software, both parametric and through the use of non-parametric surfaces. My 3D printers, with FDM technology, allow me to print various types of materials such as PLA, ABS, PETG, ASA, NYLON, ABS reinforced with carbon fiber. I also carry out post production of models by smoothing the layers, applying primer, grouting and painting.

We founded MPjetting in spring 2021 with the idea of offering and manufacturing 3D sand molds for the open market. We are particularly proud to be the first company in Austria to have our own 3D sand printer. We have found a suitable production site in the halls of a former leather factory. We started production here on November 1st, 2021. The advantages of 3D printing include the fast throughput time from data entry to the delivery of the components, the unlimited variety of geometries and the cost savings due to the classic model facilities that are not required. If you already have a need for printed sand molds and/or cores, we would be happy to hear from you. We would also be happy to send you samples so that you can get an idea of our quality. You can not only obtain sand molds and/or sand cores from us. With our partners for design, casting and machining, we can deliver prototypes, individual parts and series parts made of aluminum within a very short time. In addition, components made of other materials such as gunmetal, cast iron, etc. are also possible. If you have a need for components made of printed sand molds and/or cores, we would be happy to hear from you. Your MPjetting team

ZEIKOS GmbH is a service provider in the field of industrial 3D printing from individual parts to series production. We work with PA, silicones and transparent plastic. Our advantage is that we can solve problems for our customers because we are both a design office with a small mechanical workshop and we have a network of manufacturing partners. We specialize in producing your printed parts with series finishes. From medical surfaces to surfaces for outdoor use. In addition, we can support you with the construction or simply with the data transfer for 3D models.

3D printing service for small series, functional parts and prototypes made of plastic.

Deharde-Maschinenbau H. Hoffmann GmbH is a soundly established company in the metalworking industry with a workforce of over 150. The production of jigs and fixtures - as well as the construction of sophisticated high speed and low speed wind tunnel models - represents our particular fields of specialisation as contract manufacturers. Our scope of activities is traditionally very broad and also includes the construction of special-purpose machines and moulds.

MARAZZI OFF MECC deals with Turning, Thread Rolling and 3D Printing

The plastics specialists from Baden-Württemberg. We have been experts in new plastics processing technologies for more than 35 years. We inspire our customers with the development of special injection molding processes, sophisticated tools and professional simulation. We have been using industrial computed tomography to qualify our components for 10 years. We successfully offer this as a service with five of our own systems. Additive manufacturing optimally complements our range of services and closes the in-house process chain.

 High tech manufacturer of Plastic and metal parts as well as assemblies  Number of items 1 250,000 pc / a  Headquarters near Frankfurt (  Automotive IATF 16949  Aviation DIN EN 9100  Customer industries  Automotive  Aviation  Medical technology  Consumer / Lifestyle

With more than 25 years of experience in 3D printing, Materialise stands for expertise especially in the area of software for additive manufacturing and 3D printing services. The combination of our software solutions and service offerings merge into a flexible and open platform for the entire 3D printing industry, which companies from a wide range of industries can rely on: healthcare, automotive, aviation and space travel, design and consumer goods The most important. Based on our platform, innovative 3D printing applications become reality and make the world a better and healthier place. With its headquarters in Belgium and offices around the world, Materialize is the largest group of software developers in the industry, and has one of the largest 3D manufacturing facilities in the world.

tbko - thomas adorable design + prototype operates in the area of technical development and rapid prototyping. Here we are following technologies: - Objet Connex 500 - multi-component parts in 3D printing - Objet 30-PRO - EOS Formiga P100 - PA laser sintering models - Schuechl UHG 500 - vacuum casting equipment 2 Thanks to our many years of experience in product development and rapid prototyping, we set using advanced and innovative technologies their new ideas and products quickly into reality. Our ultimate goal is to satisfy our customers through quality and punctuality and to accompany them in the long term with your innovations.

Innovative and reliable service from the Hannover region for product development, Rapid prototyping, laser sintering, small batch production and CNC machining further information about MFD - Kunststofftech GmbH: https://www.mfd-gmbh.de/ Since its founding in 2003 MFD can look back on a steady growth. Today the production development is adjacent to the laser sintering, rapid prototyping and contract manufacturing of prototype parts and small series, the service portfolio. In the district of Hanover, you have a team of designers, product developers, sample and prototype builders and precision engineering and metal cutting available. Thus MFD has in each production area with a high level of expertise and due to the high level of vertical integration, even time-consuming and complex tasks to offer cost-effective. Whether. As rapid prototyping service provider for 3D printing and laser sintering components, as small batch manufacturer for plastic components, or as a system provider for product development, prototyping and serializationMFD finds a solution for every requirement. Through a detailed order planning and specialization in prototypes and small series short delivery times can always be offered, in Rapid Prototyping and prototype delivery times are sometimes a few working days realized. . MFD supports its customers from the idea of a plastic article through the prototype to small series production of several thousand components as competent partner and would be as an innovative company on new tasks.

Besafilm is a family-run company of Colognola ai Colli (Verona), founded in 1987 thanks to the happy intuition of Santino Beltrame, father of Youri Beltrame, today owner and sole administrator of a reality with a great tradition, rooted in the territory but oriented to the future and to continuous technological evolution: capable of providing a third-party service for any industrial sector. Our company, expert in cutting and rewinding from roll to roll, in particular plastic and paper, is today able to cut any material. We have moved from an artisan company to an industrial company with excellent manpower. All this thanks to the work carried out by around 30 employees, who work 24/7, thanks to a fleet of re-reeling machines that represent the best in circulation, capable of guaranteeing high precision work . Investing is our philosophy. We are investing in a series of modernization interventions, both structural and of an IT nature, which will project Besafilm towards a further technological evolution, to respond to every kind of request from our customers. Like 3D printing, a fast, innovative and highly personalized service.

Next3D is a Romanian Start-Up that provides outsourced additive manufacturing services.

Vicast Metalurji was established in 2023 to produce heavy-duty cylinder heads and engine blocks. Since then, our company has continued to grow, and in 2024, we launched our second factory. Currently, we operate in a total area of 3,500 m², with 2,000 m² of it being enclosed, manufacturing cast iron and spheroidal cast iron products for the automotive sector. As Vicast Metalurji continues to grow, it continuously sets new goals and continues to invest, responding to customer requests and demands in a timely, high-quality, and sustainable manner. Our company specializes in producing spheroidal and cast iron products, particularly cylinder heads and engine blocks, and has made investments in this direction. Our company is capable of producing spheroidal and cast iron products in single pieces ranging from 2.5 kg to 250 kg, and it plans to invest in the future for the production of vermicular gray cast iron and single pieces weighing up to 2 tons. Our company is committed to efficient operation, quality and diverse products, fast service, and a customer-oriented approach, aiming to carry this mission forward to future generations while growing and developing in a sustainable work environment.

A Ukrainian additive manufacturing provider and an OEM of LPBF equipment relocated to Poland. End-to-end capabilities from DfAM, topology optimisation, CAD, Metal 3D printing (5 machines), DLP printing, FDM and post-processing with CNC.