We are a manufacturing company focused on long-term support of business processes and dynamic adaptation to market conditions. Our business relationships are based on partnership and trust. We specialize in the production of complex steel components in the field of mechinebuilding, automotive, mining and construction industries. We use modern technological procedures and are always in search of ways to further improve the processes. The experience and innovation of employees are a guarantee for quality products and services. We perform: - CNC plasma and flame cutting - Laser cutting - Metal sheet cutting with scissors - CNC bending - Tube and profile cutting on a bend saw - Mechanical metal processing(turning and milling on classic or CNC machines) - Metal fabrication - Colouring - Sandblasting

In 1980 Hidrokar Press started the manufacturing of hydraulic press with customers expanding all over Turkey and a constantly evolving service network of dealers which reach overseas market the company is moving towards becoming a constantly developing brand day by day. The wide product range of our products is developing for our customers. Following the technology and innovations our enthusiasm is renewing every day our experienced production and our R & D team are constantly working to ensure the satisfaction of our customers. As Standard • Workshop presses • Rubber presses • Deep drawing presses • C type presses • Sheet forming presses • Broach keyseating presses • Car plate products • Scrap balling presses • Scrap cutting shears • Recycle equipment Special intent presses It continues to produce quality solutions for its target audience with the production of special-purpose hydraulic presses in many different constructions and sizes. The presses produced by the Hidrokar Press which is among the preferred companies in the sector with its successful works are used in automotive spare parts, agriculture, textile, food, energy, defense, construction, mining, metal, aviation, maritime and so on. It is used by various manufacturers in such industries. Located in Konya, central of Turkey, including service providers and manufacturers in many countries of the world Hidrokar Pres aims to become an international brand. Since the day of its establishment, the company has been working on the basis of customer satisfaction, quality and reliable service. In addition to the product sales, in case of any failure that may arise in the field of product warranty, technical service and spare parts the company takes care to maintain its relations with its customers after sales and offers alternative solutions to its target audience.

The company Wilhelmshaven steel trade and Cutting Service GmbH (WSZ GmbH) has emerged from the operation Wenger and Neuhaus OHG, of the 01 April was founded in 1986. The former founder and Jürgen Wenger Werner Neuhaus are still shareholders of the company and are crucial for the career of the company. On 01 July 2000, the establishment of the Rare Disease GmbH and 01 was October 2000, the move to the Emsstraße 29 in Wilhelmshaven. The company manufactures WSZ on the latest CNC controlled machines for the metal working industry. The company currently has 18 employees. To meet the customers requirements over the years, the machinery is constantly expanding gerechtzuwerden. The original area of the Autogenbrennschneidens followed laser cutting machines and a water-jet system. Its latest acquisition in the machinery of Rare Disease GmbH is a sand blasting machine. The PC equipment with the latest software ensures that the customer's specifications whether it be drawings, patterns, templates, sketches, files to almost all common formats (.dxf,. dwg) or even just ideas in CNC control commands can be implemented The flexibility of the company based on modern equipment and qualified personnel. We are certified by TUV Nord for the proper re-stamping of materials and products for pressure equipment in accordance with the Pressure Equipment Directive (97/23/EC) and the AD 2000 regulations (5106-W 3:04, version 04.2004). Regionally, we serve every day Wilhelmshaven, Friesland, Oldenburg and Bremen (2xwöchentlich). In our laser systems We will laser engrave for you on a size of max. 2500 mm x 16000 mm to a thickness of 15 mm. Of course, other formats are possible. We cut small (1000 mm x 2000 mm), medium (1250 mm x 2500 mm), large (1500 mm x 3000 mm), maximum (2000 mm x 4000 mm) and large formats (up to 2500 mm x 16000 mm ). We will laser engrave up to 15 mm mild steel, stainless steel and aluminum up to 12 mm to 6 mm. For the weld preparation, we have a laser system with bevel head! Possible are I, V & Y chamfers. With the aid of the oxy-fuel flame cutting, we can produce cost-cuts of 5 mm to 200 mm. Plasma blanks we provide with high precision and low cost even in small quantities individually for you here. With our continuous blasting machine we are able Profilstahlkonsruktionen, plates and other components of 1500mm width and 600mm height to shine. In addition, we offer a 1-hour express service * for blanks. * If material in stock!

We are a small company established in 2015 from Romania. Our company is a family business, me and my father are currently working and we successfully cover all the departments and deliver good quality parts. We have great experience in working export, we worked for foreign companies from the beginning (Italy and France companies). For the last 2 years we worked for Xometry GMBH, and we had completed over 260 orders. We are searching for new opportunities and new clients to establish a long term partnership (with repetitive orders). We are client orientated people and we have the capacity to adapt to our clients needs.

---> WE BRING IN SHEET FORM The company "Schlenther stainless steel products" was founded in 1983 and originally worked in mechanical engineering. In 1990 the company was restructured and has been working since that time with the stainless steel material. Today, the company produces stainless steel products for various areas. We are specialized in the production of round containers of varying size, primarily zBTrichter anything unusual in size and shape according to customer's request. * Products: -> Funnel, filling tank, -> Conveyor and metering for engineering companies that produce machines for plastics processing -> Containers of varying size and shape according to customer -> Serial production of eccentric hopper -> Hopper according to customer specifications -> Products for plant construction and process engineering -> Products for catering and restaurant such as Individual Champagne Cooler and Accessories -> Products for the automotive industry and vehicle -> Components and component production, suchExample, for machines in the food, chemical, meat processing - and wine processing industry -> Vacuum container for the meat industry Which find> Stainless steel products for equipment and machinery in the dairy industry or in agricultural production use - -> Products for florists, gardening and landscaping -> Special design for swimming pool equipment (eg, bubble seats, intake grille, coarse screens, waterfall showers, air distribution boxes, etc.) -> Shop by Smokers for hobby supplies (fishing equipment) -> Creation of different accessories (decorative items, flower bowls, shoehorn "Long John" about 70 cm, etc.) * Our expertise -> Quick quotation -> Reliability, flexibility, Sorgfälltigkeit -> Short production times -> High quality -> Cheap prices * Get to know us, testing our work * -> We like to say. "Is not .. not there ... "

Lithuanian company Jansvis JSC activities – manufacturing and designing of tanks, reservoirs and constructions of stainless steel and structural steel. Tanks / Silos / Reservoirs / Process tanks / Non standart tanks For food industry – dairies, flour mills, chocolate, food oil. For chemical industry – fertilizers, fuel. For agriculture – feed and grains storage. For alcohol industry – breweries, wine, vodka. Constructions / Containers / Pallets / Platforms / Racks / Gatings etc. www.jansvis.com

NURSAL Makina is a manufacturer & exporter company. We are specialized in sheet metal fabrication. Our core business is welding Our capabilities: - Laser cutting & bending - Press forming - MIG/MAG, TIG - Pipe, profile bending & cutting - Powder coating - Wet painting - Chrome plating, electro galvanizing, hot dip galvanizing - Machining & grinding We have a wide range of products including tanks, barriers, platforms, guards, conveyors, stairs, cabinets, frames, machinings etc. Our target sectors: Construction, Automotive, Hydraulics, Textile, Agriculture, Marine, Offshore For more information about our company you may take a look at our website www.nursalmakina.com/en/.

LK Metall offers individual plant construction that protects the environment and resources. The products set new standards through cost-effectiveness and process engineering expertise. We supply and support customers across Europe from two German production sites. State-of-the-art production processes as well as the in-house process and process technology are a guarantee for successfully developed system solutions. LK Metall is certified according to DIN EN ISO 9001 and has more than 150 years of experience in metal processing. The greatest motivation for us is the satisfaction of our customers from different industries.

Ladies and Gentlemen’s, We are a Polish producer of mechanical parts. We employ qualified engineers for the production processes and quality control. Production processes are prepared on the based of an insightful analysis of customer requirements, and own production capacity. The price offer is also a guarantee for the customer, receives a product that complies with the requirements of quality and strictly within the agreed delivery period. We produce and delivery: 1. CNC turning of metal parts with a maximum diameter of 250 mm and a length of 400 mm. - the accuracy of turning +/- 0,005mm (IT5-IT6) - obtained surface quality to Ra0,63 / Rz4 - machined materials: Stainless steel, black steel, aluminum alloys, copper alloys, plastics; 2. CNC 4-axis milling of metal parts with maximum dimensions 750x500x500 mm. -precision of milling +/- 0.01 mm (IT6)? -the resulting surface quality to Ra0,8 / Rz6,3 - machined materials: Stainless steel, black steel, aluminium alloys, copper alloys, plastics 3. We cooperate with carefully selected service providers for the following areas: - laser cutting of sheet metal - thickness up to 20mm - plasma cutting sheet metal - thickness up to 100 mm - sheet metal bending on press brakes - MIG, MAG and TIG welding - other processes related to the machining of sheet metal and welded machine parts (shot blasting, powder coating) We provide production of parts strictly according to customer requirements, by working on our own quality assurance system based on the requirements of our customers from Switzerland and Germany, consisting in: - preparation of production including a detailed analysis of the customer's requirements - careful control of acceptance materials and semi-products - systematic inspections during production and immediately corrective actions - specific selection process for material suppliers and subcontractors of additional services - careful protection of goods during delivery to the customer Best regards Eng. Karol Miaskiewicz CEO Tech-Project Tel. +48 609 425 898 Email K.Miaskiewicz@tech-project.eu

We do custom work for mechanical engineering Welding assemblies I Machining I Plant construction I Assembly Schrage GmbH has been a reliable manufacturing partner to the mechanical and plant engineering and capital goods industries for over 130 years. We manufacture individual parts and welded components with and without further machining according to your specifications and designs. In addition to the ready-to-install production, mechanical processing and surface treatment of workpieces and their assembly into modules, we also plan and manufacture complete machines and systems in the field of special engineering. Made to measure - precise fit and ready to install I Made to measure - customer-specific and on schedule I Everything from a single source. Schrage GmbH at a glance: Welded steel structures - up to 20 t unit weight - stress relieved annealed - blasted - primed and varnished - Steel S235JR, S355J2G3, stainless steel V2 V4, 1. 4301, 1. 4571, 1. 4404, etc. Machining - Milling and boring mill machining, also as pure wage work - Processing of large parts up to size 8,000 x 3,300 mm, 5 Axles - Turning, also with driven tools Special machine construction - completely assembled components - ready-for-operation machines - Repairs For further details, please refer to the documents in the download area. We are looking forward to your inquiry! Your Schrage GmbH - Team

We manufacture machines, machine parts and spare parts. Repair and maintain your existing systems and carry out revisions by. Through the use of CNC technology we achieve a high dimensional accuracy in the field of spare parts. Challenges are discussed partly on site with the customer, so that together fast and optimal solutions are found for difficult problems and tightest deadlines. Activities Projects Manufacturing of delivery devices for a glass building operation Manufacture of heat exchanger components with high quality standards Design, construction and installation of an extra-wide canopy New development and manufacture of an apparatus for inserting dowel pins in a polyamide / steel composite system Revise of milling heads for the wood manufacturing industry Design, planning and construction of a new Entaschungssystems for

Satisfied customers are the best proof of our successful work. We produce everything in-house. In this way we guarantee a quick project flow, even if it takes a little longer. Our range in metal construction is broad. We advise you individually, also on special requests and implement them efficiently and with experience for you. And everything that we cannot do, our qualified partners can!

Rampinelli has been working since 1913 in the Industrial sector with Clients from all over the world, specializing in the field of contract manufacturing, with one constant guiding mission – achieve our Clients maximum satisfaction. The main sectors we serve are: • Automotive Industry • Sheet Metal Forming Industry • Energy Industry • Iron and Steel Industries • Chemical and Pharmaceutical Industries • Construction Industry (drilling/piling rigs, earth moving machines) Rampinelli is specialized in the field of custom construction of mid and large size components that require high quality standards. The services we provide our Clients include: • Engineering & Consulting • Mid-large size Fabrication • Mechanical Machining • Construction of Machinery & Equipment • Revamping & Regeneration • Installation and Maintenance services • Special Projects Rampinelli is organized in the following internal divisions, working jointly to provide our Clients the best possible service: • Cutting/Preparation • Fabrication • Welding • Cladding • Mechanical Machining • Coating • Assembly • Maintenance Services

MAZET – your competent partner for chipping and steel construction We are your manufacturer based on wage labour for chipping and metalworking. As an efficient middle class company we can offer flexibility and quick reactivity. Performance: Milling, Drilling, Planing; Turning & Bevelling; Drilling; Locksmithery, Welding shop; Build-up welding; Miscellaneous

As medium-sized family we are already over 50 years Specialist for individual solutions in instrumentation and testing and our instruments are used around the world. Our flat, flexible structures we have to work in a position even special requests efficiently. This enables us to specifically develop our products. If it matters, for liquid vapor and gaseous media in pipelines and containers temperature, pressure, level and flow rate to be measured, is the Himpe AG for over 65 years one of the leading suppliers of primary measuring devices for individual process solutions. Our product portfolio includes a wide variety of instruments for plant construction. Our focus is on installation elements for temperature, pressure, level and flow measurement. Around our products we also offer all related services, the production upstream and downstream of, and assembly parts. Another, outsourced service area is our department "wage drilling" offer we as other services also independent of production.

Individual cables and components for mechanical engineering and plant construction for the references mentioned in industries and execution of complete projects in these areas. The Group of companies includes its own production in plant construction and mechanical engineering in the Czech Republic and Slovakia. Its products include welded parts and machining parts in the areas of waste incinerators (welding parts up to 80t - chutes, deslagger, air control), power plants, rolling mills, special plants, parts for cement plants, construction, fabrication and installation of air conditioning in plant (Refernzprojekt air piping MVA Wels Austria). Furthermore we offer: Special machine according to customer documentation, precision parts for machine tools and forming (racks supports, small items of all kinds and components assembly), textile machinery (including pre-assembled machines), agricultural machinery, storage and retrieval systems (poles, lift trucks, hoists, trolleys, completely mechanically mounted) mining equipment, frames and frame constructions and much more

The company Silcom 1991 founded and is in the automotive industry since Tatig for special purpose machines and a supplier of modules assembly lines. equipment - Incision system with Oxigas, with program control: X axis: 4000 mm Y axis: 3000 mm - Welding system MIG-MAG: maximum character stream: 450A - Circle Bandwerk for cuts: maximum cut diameter: 400 mm - Electric oven for Einsatzhärtungen, Relaxation operations Enthärtungsoperationen; maximum dimensions of treated parts: 1000mm x 600mm x 450mm. - Salt bath hardening system: maximum dimensions of treated parts: 350 mm x 150 mm x 150 mm. - Tanning system: maximum dimensions of treated parts: 800 mm x 400 mm x 200 mm. - Drilling -simple; - Radial drilling: maximum lift on the rotary arm: 1000 mm; - Koordonatenbohrmaschine: X axis: 1120 mm. Y axis: 710 mm Z axis: 630 mm. - Water pressure press with simple effect: force 100 tons. - Lathes - classic - with a processed an average of 650 mm; with a maximum length of the processed portion of 2000 mm; maximum weight of the processed part. 500 kilograms; - Lathes with program control: a processed an average of 320 mm; with a maximum length of the processed portion of 800 mm; maximum weight of the processed part. 200 kg. - Karusseldrehbänke: a processed an average of: 1100 mm with a maximum height of the processed part of: 600 mm. - Milling: horizontal axis: strokes: X axis: 900 mm Y axis: 300 mm Z axis: 300 mm vertical Aches: strokes: X axis: 900 mm Y axis: 300 mm Z axis: 250 mm Bohrwerkartig- with manual control: strokes: X axis: 850 mm Y axis: 850 mm Z axis: 700 mm -With program control: strokes: X axis: 1240 mm Y axis: 1130 mm Z axis: 800 mm - Processing center: horizontal axis: strokes: X axis: 1120 mm Y axis: 1000 mm Z axis: 960 mm vertical axis: strokes: X axis: 1325 mm Y axis: 762 mm Z axis: 600 mm - Surface grinders -Langhobelmaschine: strokes: X axis: 900 mm; Y axis: 300 mm; Maximum height of the machined part: 300 mm With turntable: Translation by Google Translate

ASCO sums up its core competence: "power play in steel". Decades of experience paired with technical competence and state-of-the-art production facilities have made ASCO Anlagenbau a sought-after manufacturing partner for trade and industry. Together with our customers we develop the optimal solution individually according to your requirements. "ASCO, power play in steel" is the credo based on our company values of quality, speed and reliability. Clearly defined goals and operational measures help us achieve our goals.

DAMA manufacture of sheet metal blanks for more than 35 years by autogenous Flame cutting and plasma cutting from 15 to 150 [300] mm. The high-quality standard is determined by the use of sheet metal and slab ensured from Germany and other Western European countries. Mill scale and cut edges with larger components by plastering Rays away. Small parts are tumbled. Custom flatness tolerances through the use of the 500 t Straightening press guaranteed. Danne For over 20 years, sheet metal blanks [steel, stainless steel & aluminum] be the 2D laser cutting produced. For production are 8 laser system in Large format 1.5 x 3.0 m and 2.0 x 6.0 m format available. In addition to the laser systems is also a CNC punch for the Sheet Metal -., And Processing. Depending on customer requirements components may also be blasted. Further processing is done with CNC controlled Abkanntpressen up to a Length of 6.8 m. ASK manufacture of welded structures [MIG, MAG, TIG, welding of Hand or robot] according to customer drawings, including a mechanical Machining [5 axes]. In addition to the various welding methods are also different welding processes such as robotic welding available. The production ranges from number 1 to more than 1,000 St.. Also, the unit weight for components in the field of mechanical engineering exceeds 4 t. For details, see company presentation and / or power spectrum