Pad printing for precise prints

The company RWGrass GmbH is in the range of CNC precision turned and milled parts and finishing of cast and sintered parts at home. Our products are manufactured in various materials and various sizes from small to large series. Our flexibility refers not only to batch sizes from 500 to 100,000 pieces - the adaptation to customer requirements using CAD are appreciated by our partners. The manufacture and assembly of precision mechanical devices and modules is our specialty. Presses, punching, squeezing, riveting, drilling, threading, screw, solder, tin, merge, shapes, spot welding, grinding, milling, turning, adjust, measure and test the purchase of integrated operations. The house tool makes us independent and allows for maximum on-time delivery. So workflows are optimized and customer requirements into account even better. Products: We manufacture turned parts: - Diameter from 8mm to 650mm - Length up to 200mm Milled parts: - Length up to max.800mm Materials: Stainless steel (eg 1.4301, 1.4404,), steel, brass, copper, aluminum, plastics Delivery program: Pump body housing, valve body, piston, adapters, bearing chock, collets, bushings, grips, power tap, shielding, solder lugs, optics carrier photodiode holder, spacer sleeve, stop in connector, female, fiber filters, sleeve, guide pin twist mechanism, driver twist mechanism, thumbwheel mechanics, different door- window buttons, different door window handles, press rings with slope, reference upper part, orientation completely, burner housing, hollow shafts, bolts, lever cylinder housing, shaft for drive motor, cap for drive motor, ball valve, sleeve, guide shaft, stop bar, assembly photographic technique, component assembly Motor snowmaking equipment , component assembly for medical and measuring equipment of human blood analysis;

Our company was founded in 1924 and is run by the fourth generation of the family. By 2013, our headquarters was in the city of Cologne, where we relocated lack opportunities for expansion into the 20km distant Rommerskirchen, where we built a completely new, ultramodern site on 15,000m² grounds. The pure production area excluding mezzanines 5.100m², with Erweitungsmöglichkeit on 7,000sqm. With our own products, we are in Germany's leading supplier of solutions for Tankstellentechnik (central filling stations, Zapsäulenfundamente, steel-high board mounts, manhole covers, floor mats Kopfer etc.) as well as the packaging industry (steel fittings / profiles for heavy duty boxes). Furthermore, we offer our extensive Fertigungsmöglicheiten for products of the subcontracting market very successfully. As a flexible sheet metal forming, we see our strength particularly in a large vertical range of manufacture, starting with the construction, over sheet metal / welded assemblies up to the powder coating and parts marking / - and printing in-house. Here we are at our customers for small to large lot sizes are available, like for framework contracts on call basis. We offer daily Speditionsversand within Germany and in the neighboring countries. Translation by Google Translate

laser cutting laser marking laser marking 3D printing FDM

BMmetal is an industrial unit specialized Machining (Turning & Milling) . A member of the B&M group , it offers its company a wide range of services, always striving for Rigor and Quality in each product it produces. Operating from the municipality of Óbidos, we work for the whole world. We are prepared, both in technical equipment and in specialized human resources, to carry out work with any type of metal in order to materialize each project. Our focus is always the specifics requested by each client. All the raw materials used are chosen for their quality, in order to ensure a high quality finished product.

"Standing still is a step backwards" - this sentence is probably true in any business sector as to how the plastics industry's why in the Altmark Sandau work around 30 employees constantly working to optimize VKT products continues to make service and support even faster and more individual. and the time to stay one step ahead. The VKT GmbH manufactures over 5,000 m² extrusion profiles made of PVC, ABS, PS, PP, PE, TPE (extrusion). With a total of eight production lines, we are able to manufacture profiles with various shapes and designs.This means high flexibility in production. Thanks to our own fleet, we will deliver "Just inTime". Our own design you like to support the implementation of your ideas, because: "We distinguish ideas!" Extract product range: Self-adhesive glass sprouts; beadings / sealing strips; edgings, U-profiles, angle mounts; H sections; FBA systems, door profiles, flat bars, kink bars, flat bars on roll self-adhesive, flat bars with soft lip; hollow chamber profiles, square tubes, angles / hollow chamber angle; Isosceles angle, unequal leg angles; hollow chamber angle, Z-sections, shutters guides, scroll bars, box shots, funnels, termination caps, fittings, decorative moldings, decorative pieces; Universal Glazing blocks; Universal glazing wedges, PVC profiles in RAL 9001; assembled folding shutter finished; pole connector; Eckschweißverbinder

With around 30 injection molding machines ranging between 40-200 tons of feed, rekuplast GmbH is the perfect partner for manufacturing components with an injection weight of 0.05 to 500 grams. Our machinery consists primarily of Arburg and Demag Sumitomo machines. This puts us in an excellent position in terms of accuracy and reliability. This is also reflected in our permanently statistically monitored machine and process capabilities. In our injection molding production, we produce quantities of 100 to 40,000,000 pieces per year for individual parts. In higher quantities, the processes are fully automated, depending on the complexity of the component. To ensure perfect series quality, every component is produced with the suitably configured machine. The feed and screw ratio are optimally tailored to the component — without compromise! Compliance with specified process parameters is a matter of course. Our organization is structured in accordance with the 5S philosophy in terms of order and cleanliness. In doing so, we attach great importance to a targeted material flow and use a portal conveyor for this purpose, which connects production with storage and shipping. This ensures FIFO and batch traceability, from raw material to delivered component.

Whether tools, gauges, equipment or individual serial - we supply the technology needed by our customers today and can meet the growing demands in the future. We take the position of the communication interface as well as that of the leader. So we make ourselves responsible for the services provided and learn from the feedback. In our technology pool constantly new customer needs to be recorded, analyzed and elaborated problem-specific solutions. Due to the constant improvement in all areas we want to remain competitive in the future and ensure our financial independence. Was the focus and it is to delight our customers through great personal engagement and thus long-term loyalty to us. Mature, promising high-quality products are an essential prerequisite. In cooperation we live according to the following principle: "Customer satisfaction is our highest priority." This, together with our proverbial flexibility sets us apart from the competition.

Our service options range from simple search work, to screen and pad printing, to complex assembly of automotive assemblies. Manual assembly devices for small quantities and prototypes or the use of system-controlled special machines, we develop ice-specific to be able to connect seamlessly to your production.

The Center for Laser Welding, grains and engravings in the Stuttgart area. The Reichle GmbH has more than 35 years the competent partner for modern laser welding technology, laser texturing, Narbungen- / repairs and precise engravings for Stuttgart, in Germany and throughout Europe. Moreover, our company also in the fields of surface technology and labels on unique services.

579 / 5000 Übersetzungsergebnisse Laser cutting or laser engraving of non-metallic materials and laser engraving on a variety of metals, including black engraving on aluminum. Our laser engraving creates a permanent option for marking your parts or for nameplates. Components of complex shapes made from non-metallic raw materials can be produced with precision without the formation of burrs on the cut edges. And that with optimal material utilization and low thermal influence, even for smaller quantities, but also for series production.

Our company has removed its location in Nabburg / Bavaria, a small town about 40 km from the German-Czech border. Our manufacturing is located only about 70 km away from the parent plant in Nabburg and in Tachov (CZ). We design and manufacture according to ISO TS 16949 to over 100 injection molding machines from 25 to 1000 tonnes with more than 350 employees and products in a multi-component injection molding technology. We process all thermoplastic resins in reinforced and unreinforced version of LDPE to PEEK, TPE and PUR, the biodegradable polymers and Plastic bonded magnet or electrical. conductive materials

Establishment in 1874, Today, innovative Blechbearbeitungszentrum: Engineering Toolmaking Forming System supplier diecast Joining / welding Surface Technology Assembly / assemblies Logistics Flat, process-oriented organization, own large machinery 1 August 2010: Move to the new Büro-/Produktionsstätte: CO2-neutral building approximately 60 employees Customers at home and abroad

Specializing in laser engraving, laser marking, laser cutting and 3D printing, we can realize almost any customer request. As a laser contract service provider, we process small and large series. We also realize custom-made products for private and business customers.

With a presence of over 27 years in the German market, we are committed to providing high-quality services and paying attention to every detail of our projects. We are recognized for our professionalism and seriousness, the high quality level of the products and services offered, as well as the prompt response to inquiries and the delivery of ordered products and services. Services and expertise: Design and Verification: We offer comprehensive PCB design and verification services. Our team of specialists helps you develop optimal technical solutions for your specific needs. Digitization: We stay up-to-date with the latest technologies in digitizing documentation and processes to ensure that your PCBs and data are managed efficiently and accurately. Pre-production: Our experience in PCB verification is one of our main advantages. We ensure that every aspect is considered before the actual fabrication of printed circuits. Highest Quality PCB Execution: The quality of the PCBs we provide is recognized and appreciated in the Romanian printed circuit market. We adhere to IPC 600 and IEC 326 standards, and our specialists are certified in accordance with the IPC-A-610 standard. Quality Commitment: With pride, we guarantee excellent quality! Our qualified staff, UL certification, and ISO certification are evidence of our commitment to maintaining high-quality standards to meet the expectations of our customers. No matter how complex or simple your projects are, we are here to help you realize them. With an experienced team in data preparation for manufacturing, we guarantee efficiency and precision in every project. This allows us to produce PCBs ranging from the simplest to the most complex, with up to 28 layers. Over time, we have had the opportunity to produce printed circuits in all fields of activity, collaborating with both local firms and multinational companies. That is why we are proud to develop customized PCB solutions that perfectly meet your needs and offer you materials of the highest quality. From FR-4, Aluminum, Teflon, Copper core, Polyamide, and Rogers to Flexible PCBs and Rigid-Flex PCBs, we have the expertise and resources to use various specialized materials according to your requirements.

Sheet metal processing The complete sheet editing • Construction • Development • Stamping • lasers • Bending • pressing • Welding • Pad printing • Installation receive from one source. We are able to handle small and medium-size sheets up to a thickness of 6 mm 2 punch or punch-laser combination. Here both spouts and threads can be formed. The combination of punching and laser embossing and round shapes are possible. On 3 brakes sheets can be up to 2.50 m folded or folded. When pressing both screws, bolts or the nuts are pressed at high pressure into the sheet metal part, thus creating a tight connection. Thus, a quick and easy processing can be guaranteed by the assembly. Additional processing steps such as welding, spot welding, grinding, deburring, threading, etc. are also carried out by us. In addition to the surface finish we also offer still on the pad printing and assembly of components. What options do we have for your task, ask us .. Powder coating The surface treatment may be performed on three powder coating systems. For your surfaces, the environmentally friendly powder coating technology is a durable and contemporary solution. By appropriate design of our coating systems, we are able to cover a wide range of coating parts. We are able to coat both small series and large series economical. We can respond with our own frame work to the needs of our customers and ensure efficient production especially in large series of small articles.

Since 1961 we are a leading supplier in the processing and application of engineering plastics. During over 50 years in the market, with continuous growth, the products, services and investments in modern equipment have been continuously adapted to customer needs. Proximity to our customers is ensured by our sales staff in Switzerland, France, Germany and the Czech Republic. Over 150 motivated staff work daily committed to meet the expectations and needs of our customers. Decades of experience in application and machining of plastics enables us to subject-specific, comprehensive and individualized customer service. We support our business partners in the product development from concept to mass production, including in selecting the right plastic and the components, in respect of a technical-and cost-optimal solution. The manufacture of customized finished components and assemblies is carried out by machining on CNC production machinery in the required quality and precision. Thanks to a great experience in the machining of plastics, we guarantee the required quality and precision even in the most demanding materials and tolerances.

The FME company is a supply firm for precision mechanics and medical technology. We offer everything concerned with precision mechanics, from series prototype to complete subassemblies ready to install.