Feinstanzteile

LKH develops and manufactures innovative and economical plastic products for a wide range of customers in the electrical industry, mechanical engineering, traffic engineering, and the construction and leisure and automotive industries. LKH dominates the hot pressing process as well as the injection molding technology. With this rare combination, the plastic work plays from his superior skills. The result of the dialogue with raw material suppliers and customers are quality parts and assemblies that LKH - of course - provides just in time.

The HUEBNER GmbH & Co. KG is one of the traditional system vendors for technical industrial products. On almost every continent, the company was founded over 60 years ago to support its customers with innovative technologies and comprehensive know-how. Our core competencies include the design and manufacture of plastic injection molded products, rubber processing, polyurethane foam parts, vehicle articulation systems, bellows, entry systems, window systems, door systems and transition systems.

The company Fischer tooling GmbH is a medium-sized company to design and manufacture of injection molds, die casting molds and equipment of all kinds Our company was established in 1985 sen of Mr. Johann Fischer. founded. Thanks to the rapid development in 1988, an extension could be realized. The upward trend continued steadily over the years continued. In 2003, the company eventually moved to the newly built production facility in the industrial area Greimharting in Rimsting at the Chiemsee. In 2003, Mr. Fischer Johann jun. the management. Determined, he also continues the trend with proven success pursuit of perfection and innovation. 100% power Our core aim is to produce the tasks given to us with the utmost precision, top quality and absolute time. This principle runs through the whole company. Through innovation and development of our employees, we are committed to better solve our tasks - supported by most modern manufacturing equipment and production in all areas. Services Injection molding and die casting tools From simple shapes to complex multi-component injection molding tools Mold manufacture with the latest technology and the utmost care with the highest precision Fast and efficient delivery of required products tools up to a weight of 10 tons and an area up to 1200 x 900 mm Speaker grilles The manufacture of molds for speaker grill is an art that few can master mold maker. This is the challenge we encounter with the highest level of understanding of material behavior during injection molding and extremely foresighted form of planning. Devices of all kinds Measuring devices Mounting devices Beschnittvorrichtungen Handling systems Design & Development Our own design department to help you any time of the complete part design to finished tool and equipment advice. With the help of CAD / CAM systems (Catia V5 and VX), we aim to quickest possible order processing to allow in a very short time to start your production.

Goletz, the full-service provider for plastic components and assemblies. As a medium-sized family business, Goletz GmbH has been the competent partner for the production, processing and finishing of plastic parts for industry for over 50 years. This is about more than injection molding. Comprehensive advice from the first product sketch to the finished product is the basis for innovative and qualitative solutions. For us as a team, competence in plastics means practical experience and a wide range of manufacturing and processing methods such as multi-component manufacturing, surface treatment or the assembly of complete assemblies.

About us — expertise in Zweibrücken for over 20 years thinXXS Microtechnology GmbH is a world leader in the development and production of single-use microfluidic plastic systems. Our customer-specific solutions are used, for example, in in vitro diagnostics, DNA analysis and laboratory automation. As an IDEX Scientific Fluidics & Optics company in the IDEX Corporation group, we work in a global network of over 7,500 employees. Our team of highly trained and experienced scientists, engineers, and designers works closely with you to make your product a reality. We'll give you the support you need to transfer your benchtop assay to a functional lab-on-chip (LOC) system. As a competent and established OEM partner, we understand your complex specifications and meet your quality requirements for your microfluidic system. We take responsibility for the highest quality of our products. Our service is based on know-how and decades of experience in microfluidic design and the application of cutting-edge, high-precision manufacturing technologies. Talk to us about your project We offer support from the initial idea to mass production. Our customers from the diagnostic, pharmaceutical, analytical and medical industries can rely on the rapid and cost-effective implementation of their projects. That's why our customers trust us own tool shop, manufacturing, assembly, automation, cleanrooms ISO 13485 certification Our values Our values Trust, Team Spirit & Excellence are more than just words that adorn our walls. They are part of us and the mirror we look at every day. These values stand for a compass that defines us and has a lasting influence on our decisions and working methods.

Your partner in mechanical subcontracting We offer a subcontracting service for mechanical components and assembled machines, in which, starting from the customer's project, we study its industrialization, we identify the most suitable production process, we rely on the most suitable suppliers for each individual production phase.

Since 1960, SCHWEIZER Kunststofftechnik has impressed with the highest quality standards and services. With state-of-the-art machines and a team of experienced specialists, we specialize in technical and optical plastic injection molding and process all common thermoplastics and thermoplastic elastomers with and without fillers. We understand that every project presents its own challenges and are proud to be able to respond flexibly to our clients' needs. Regardless of whether it is small quantities or extensive production runs — our goal is to fully meet your expectations. From project planning to series production, we can provide you with comprehensive support; environmental protection and sustainability are a matter of course for us.

We are your manufacturer of custom-made components and custom-made products as well as your supplier in plastic pipeline construction for pipes and fittings made of PE or PP. At our location in the Freiberg Ost industrial park in Saxony, we offer you an extensive range of pipes and fittings made of PE or PP as well as various special materials such as PVDF. In addition, we offer series production with the help of our new rotary injection molding machine for any application in the construction industry, logistics sector or manufacturing industry. We would be happy to advise you. We are looking forward to your request.

We give your ideas take shape Already since 1936 we convince our customers with strong arguments on the subject of molded rubber + plastic. Not without reason do us both medium-sized companies and large international corporations from diverse industries to appreciate as a powerful partner. Whether injection molded parts, deep drawn parts, extrusion parts, etc., both in plastic molded parts as well as molded rubber parts, we are your competent partner.Allow a separate, ultra modern tooling and production facilities access to a production of plastic molded parts and rubber moldings in a variety of manufacturing processes guarantee maximum flexibility. The following manufacturing processes, we can be adapted to small, medium and large series depict: Plastic moldings Injection molding Deep drawing -Rotational molding Foams Extrude Lamination Molded Rubber Parts Compression Transfer presses Injection Extrusion We therefore see solutions as a holistic process to advise you qualified expert advisers and qualified application engineers, guaranteeing their active and continuous support of the choice of the optimum products to complete system solutions. Whatever your re-quest looks - you are in good hands. When you convince yourself of our

The company Miriplast is an enterprise in the plastic industry in the range of thermoplastic injection moulding located in Gostivar - Macedonia. Our commercial language is German, since we are active as a supplier for German-language countries in Europe. As company target we want to shorten the product standing cycle for our customers. In addition we offer express sampling the construction unit from a hand, measured sampled, by new tools, series production for to peak load covers of our customers and the possibility of the tool manufacturing up to and. Our enterprise consists of a young, dynamic and innovative team. Our plastic-technical KNOW-HOW by our well trained skilled workers (plastic technologists and mould makers) guarantee you an optimal conversion of your desires.

Tool and mold making, injection molding parts, wage work in the field of wire u. EDM, Turning, grinding, milling and printing of parts in the pad printing process. A wide field with constantly high quality. Qualities with which we are convincing: - High flexibility, even with short-term inquiries - Reliable Service - Low-cost manufacturing with constantly high quality - The Team: from young to old (good experience with new ideas) - Modern machines

Plastic Industrie “Utrecht” was founded in 1957 and specializes in plastic injection molding and in developing, designing and manufacturing both semi-finished and finished products. We are one of the leading plastic injection molding companies in Europe with the network to supply to locations around the world. We offer our customers a wide range of options with virtually no development or production constraints. Because of our flexible capabilities, PIU can easily supply both small and large production runs. Why Plastic Industrie Utrecht? - Flexible process from design to delivery - We welcome original ideas and the opportunity to work closely with our customers in developing new products. If necessary, we partially invest in the cost of a product/mould. Smaller series are also very welcome! - Product assembly is done by hand or fully automated - Logistics: we can transport your product to any location you require - Competitive prices - Innovation and sustainability are important to us. We work with recyclates and bioplastics - 100% in-house production for fast lead time and quick delivery - More and more companies like to use a local producer and do not always want to be dependent on production in the Far East

The GHS Plastic GmbH Ruhla is a medium-sized company with currently 28 employees. We manufacture and install thermoplastic engineering Injection Molded 2400g on modern injection molding machines from 25 tons up to 500 tons clamping force (also PVC and PVDF pipe fittings injection molded parts). We specialize in the manufacture of custom technical injection molding parts (subcontracting). Furthermore, we provide 2-k-rolls her (step rollers and chain rollers) with ball bearings and bearings for original equipment and spare parts requirements for escalators, escalators and moving walkways. In awarding projects we provide you with advice to page from the start. The procurement of injection molds, order processing and tool monitoring of production directed by GHS. The patterning (on request EMP and advance prototype parts possible), tool optimization and mass production made directly to GHS. There will be processed unfilled, filled and modified thermoplastics.In addition to the standard plastics GHS processed PVC and PVDF. The encapsulation of inserts is possible. The repairs and maintenance carried out by the company's own toolmaking. Due to our structure we are flexible and work in a customer-oriented. We offer a good price / performance ratio, deadline and quality deliveries. A major goal of the GHS is to have satisfied customers. The GHS Plastic GmbH Ruhla works with extremely high precision injection molding machines from renowned manufacturers that are listed in the table below. All machines are equipped with modern handling and Einfärbtechnik. We also work with dry air dryers, temperature controllers, hot runner units and mechanical supply and discharge lines.

We manufacture according to drawings following products: Turned parts of Dm Dm 3 to 65 as a rod rotating parts -Rotational parts to Dm 120 -Frassteile to 300x500x200 Assembly -------------------------------------------------------------------------------------------------------- All our Produtke are made on CNC machines. At the time are in our production: - 13 CNC turning machines (Traub TNC30, 42, 65; Traub TNS30/42D; V200 INDEX, INDEX GE42, 65; Nakamura SC250, Maier ML26 ...) -3 CNC machining centers (TRAUB TVC350P, Schmid VMC1000) -Various machines (sawing, Nahcbearbeitungsmaschinen, vibratory finishing machines, presses ..) -------------------------------------------------------------------------------------------------------- We produce parts in small to medium-sized amount in almost all machinable materials. To see our quality Tete pay short delivery OPENING HOURS, little complaints and zuverlasigkeit. --------------------------------------------------------------------------------------------------------- More info can be found on our internet site or just give us a call.

HELMAPLÁS was founded in 1982 as a supplier of high precision and quality injection moulds. .Customer-oriented service. .Ongoing investment in state-of-the-art technology in all areas. .Highly qualified and specialized technical department. .Last generation manufacturing design and methods. .Total quality above all else

Main tools contract manufacturing is an important part within the Maincor AG. With almost 100 employees, custom products for a variety of applications are manufactured. The main industries are: - Mechanical Engineering - Food Industry - Sanitation sector - Printing Industry - Automotive (Development) - Medical - Racing (Formula 1) Due to the different requirements exist decades of experience in a wide range of materials and technologies. The numbers go from item and prototyping to series production in three shifts.

We are a Ukrainian company specializing in the production of spare parts and finished products from metal, wood and plastic. Our team has united large manufacturers into a single production center. We control the timing of shipment of products, as well as quality and accuracy. Our employees are trained and improve their skills and professional qualities. We look forward to our cooperation and make your product even more perfect ...