We deal with prototyping, construction of steel molds, production of plastic parts by injection, aluminum die-casting and turning. Prototyping in all materials available for 3D printers, numerically controlled machines or silicone molds for pre-series, necessary in the first experimental or production phase. We treat all types of plastic material including the transparent and the diffusing opal. In the metals field we work mainly with aluminum, stainless steel, brass, zamak. We have a lot of experience in the medical field, lighting technology, vending and coffee machines Website: www.protoproject.it We produce steel molds even of large dimensions, for molding we have 10 presses from 30 to 550 tons for each type of plastic and subsequent finishing or assembly Website: www.protoprojectstampi.com

The company “Hafelder Kunststoffwerk” was founded in 1945 by Mr. Ing. Zittmayr in Hafeld (Upper Austria). Back then, only plastic injection machines were used (source drinking basin production). In 1990, the company was acquired by Friedrich Gruber and continued to operate as a plastic injection moulding plant. Later, the first spare parts for spring basins were produced in-house. (First machine - Emco 342S). More and more lathes were gradually purchased, including two machining centers. From 2000, the company moved to the new premises of a former office furniture factory. Currently, around 100,000 turned parts are manufactured every month from a wide variety of materials such as brass, stainless steel, copper, cast iron, plastic, titanium, steel, etc. In 2002, another turning shop (Ing. Arzberger in Trumau), including machines and customers, was taken over. As a result, our company was almost doubled in size and renamed Hafelder Präzisionteile GmbH. In recent years, production has increasingly switched to special, turned and milled parts and mainly parts have been manufactured which must meet high requirements or have very low tolerances in the thousandths range.

We the company MIPP Mikro-PräzisionsPlastic-Teile GmbH have been a guarantee of quality and innovation in the production of precision plastic parts and assemblies since 1951. We specialize in processing technical, thermoplastics into high-precision parts. As a competent system partner with a high level of innovative strength, we take care of your wishes. From the design of individual plastic parts to the fully assembled assembly. We offer expert advice and support throughout the entire product cycle, from design to service, from production to “just-in-time” logistics. With our company headquarters in Karlsruhe and our subsidiary in the Slovak Republic, we are a strong and reliable guarantee of precision and quality paired with decades of tradition and experience.

Albtechplast AlbTechPlast sh.p.k AlbTechPlast sh.pk established in 2013, is a leader in the production of plastics and packaging materials, significantly supporting the agricultural sector, and beyond. ATP brings to the Albanian market the best quality of packaging and production of plastics thanks to technology, production capacity and the right people to help your business grow. Our success is based on the provision of a wide range of plastic-based products, and a closed-loop production system affecting all stages of product realization, starting from raw material, form production machines, production machines plastic, to the final design. mission ATP offers consistent quality and excellence by combining the constant availability of our wide range of products VISION ATP aims to provide market solutions through a closed production cycle for all ranges of packaging products. technology Technology is one of the strongest points of AlbTechPlast sh.pk, where by embracing the latest technology, we enable maximum quality

allowed us to appear in the Austrian and German markets, where we have been present as an active supplier since 2005 . Our site is located 14 km from Budapest, in Ócsa , next to the M5 motorway. We have sufficient capacity to produce and contract new products and parts with the help of our modern injection molding machines. For fast customer service, we are available in up to 3 shift processes. In our factory, we can serve any customer's needs with our equipment from 20 tons to 250 tons . Our Nissei and Arburg machines can be equipped with a tempering, suction, extractor, dryer or even a conveyor belt, as required by the nature of the product. During the processing of plastics, we use, among others, Pa 6, Pa6.6 Pc, ABS, POM, PBT, soft PVC, PE, PP materials, from which we mainly produce technical components for our domestic and foreign partners. We also undertake the design, manufacture, maintenance and renovation of tools that are essential for the production of plastics . If required, we also provide appropriate storage , for example for seasonal products.

Technoplast GmbH is a specialist company for individual requirements. Working hand in hand with external development and design offices, we translate your wishes and requirements into a high-quality end product. Our areas of expertise here are far-reaching and support your requirements in terms of design and functionality. Our expertise is the basis for your success. With our expertise in the area of manufacturing high-quality technical plastic parts and assemblies, we offer you project support from the initial concept to the finished component. Highest quality is our standard Our many years of experience and certification in the area of manufacturing plastic parts and assemblies from the initial discussion to the finished product has been a maxim for more than 10 years that is well above the standard and we are happy to make available to our customers. Consistent for our customers We monitor the entire process chain and adapt it to your needs at short notice. From design to toolmaking to completion, we offer you an all-round package of service and production. Local production All our steps are carried out by us or our partners in Germany. For you, short distances mean perfect quality and quick response to market demands.

Our company has 13 plastic injection machines which have a clamping force of up to 100 t and can produce parts weighing up to 200 g. We also have an automatic packing machine for tubular bags that can pack any kind of bulk material. As well as a pad printing machine with a cliché size of 100×100 mm. With this machine park and our close cooperation with several tool manufacturers, project planning and production of technical parts are also possible at short notice. Punctual delivery and quality are, of course, our top priorities.

For more than 80 years, the company sells technical products for Industrial, maintenance, trade and crafts. - Qualified clerk guarantee you a professional advice. - Sales representatives stand for the locally based acquisition and presentation of our products over 1,500,000 comprehensive range of products available. - Membership of Schimmel in the Association of technical traders (VTH) and the ASSI health and safety and the Noise Abatement cooperation where nationwide many wholesalers are merged. Since March 1997 certified according to DIN EN ISO 9001: 2008 Visit us on the Internet at www.jws.eu and challenge us with your inquiries: - Department Drive Technology: Drive belts, pulleys, oil seals, shaft seals and couplings of Companies Conti, Optibelt, KTR, Flender, Gates and other eMail antrieb@jws.eu - Department Personal Protective Eequipment: Head, body, hand, skin and foot protection the Bacou Dalloz, 3M, Sundström, Kübler, BP, Ansell, KCL, Stockhausen, Steitz, Atlas and other companies eMail psa@jws.eu - Department Chemotechnical Items: Industrial tapes, sealants, lubricants and technical glues the company Loctite, Teroson, OKS, UHU, Henkel, Tesa, Beiersdorf, sickle, Huntsman, CRC and other eMail chemo@jws.eu - Department Noise and Soundprotection: z. B. Rubber-metal elements and vibration isolation mats and air soundproofing the Illbruck, Getzner, Conti, Phoenix and Tanning Company and other eMail schall@jws.eu - Department Hose Technology: PVC, PTFE, silicone hoses, molded hoses, polyurethane and PVC suction hoses the Norres, Guttasyn, Conti and Gates companies and other eMail schlauch@jws.eu - Division Technical Rubber and Plastic Products: Gummidichtungs- and press plates, mats Rief, stampings, gaskets, Klingersil, O-rings, radial and Profile cords, edge protection etc. eMail gummi@jws.eu - Department Moldings and Plastic Injection Products: drawing related and tool-specific products made of rubber, Viton, Hypalon, plastic and thermoplastics elastomers eMail gummi@jws.eu - Department System Supply, C-parts procurement and assembly: Kanban and JIT delivery, VDA container, consignment store, system power and assembly eMail roessner.m@jws.eu

CNC technique We are a company that has solutions for your needs. The main services related to our business include: Plastics processing (injection method) Production of injection molds Due to the wide machine park (CNC machine tools / Injection molding machines), we serve clients comprehensively, thanks to which we can carry out the creative process from the initial concept through the final product and serial production. The industries we mainly produce for are: Automotive (Renault Group, PSA, Jaguar, Land Rover, Volvo, Ford, Audi), household appliances he company CNC Technika specializes in CAD design and production of plastic injection molds and pressure molds for ZnAl castings. We also carry out orders in the field of machining on CNC machine tools. Our technological capabilities are: - vertical CNC centers - maximum range 2000x1000mm - CNC lathe - maximum diameter 250mm, length 800mm - CNC sinking EDM - range 900x700mm - CNC wire EDM - range up to 400mm - deep drilling - up to 1500mm - sandblasting During the production of molds, we also have the option of performing tests on injection molding machines We also carry out orders for production on plastic injection molding machines (outsourcing). Our machine park is a modern injection molding machines of well-known manufacturers such as Battenfeld, Haitian with clamping force from 50 to 800 tons. We offer drilling deep holes up to 1500 mm on a specialized CNC machine tool dedicated to this type of operation. Deep drilling is carried out using barrel drills with internal cooling, which ensures high accuracy of the hole. The holes are made perpendicularly and at an appropriate angle to the drilling plane. In addition, we make countersinks, threads, etc

Production programme: - Elements for household appliances (metal and plastic components) - Elements for auto industry - Elements for electro industry - Turning parts, drilling parts - Springs – compression, torsion, extension - Bending elements ( wire and strips –Bihler system) - Tool development, our own tool shop - Tube elements - Pressed elements up to 500 t - Injection of plastic and injection of plastic and metal together - Casting of aluminium, brass and copper alloys and mechanical treatment of these elements - Heat treatment (hardening) - All types of robotic and automatic welding - Rolling and cutting threads up to M40

Manufacture of thermoplastic injection molding precision parts to 37 modern injection molding machines with a clamping force of 150 - 3250 KN and shot weights from 0.1 to 1000 grams for different industries Additionally, we offer: Fabrication or assembly of components through to sales packaging Printing by pad printing process Laser marking Mechanical re- Welding of metal parts in plastic parts

Fuchs GmbH & Co. KG Plastic parts Mould Assembly

Algotec GmbH was founded with the aim of meeting the diverse, individual needs of its customers with tailor-made products and solutions in the fields of PLASTICS, METAL, ELECTRICAL MECHANICS and MOLD CONSTRUCTION. Decades of know-how, state-of-the-art manufacturing techniques and efficient processes enable us to provide our customers with the best possible support in increasing their profitability in today's highly competitive market. In order to always offer you first-class service, our Swiss company has joined forces with the Uzan Group www.uzanotomotiv.com.tr, which has been based in Turkey since 1993. Through this cooperation we have succeeded in combining the highest product quality, maximum environmental awareness and extremely efficient supply chains.

Plaintiff offers complete system solutions in precision injection molding. From engineering to the production molds for precise serial production. Including so important added values, such as tool management, technical, logistics, and quality assurance. Whether conventional materials, engineering plastics and innovative high-performance ceramics. Wherever components operate precisely and smoothly, or "simply" just need to look beautiful. For well-known manufacturers in many industries. System solutions from concept to series production

Allinplastics is an innovative company from Mainfranken and plastic injection molding manufacturers. Our sophisticated injection molding process offers the best possible solutions for the production of injection-molded parts in large and small batches.

PLAR Ltd. was established in 2003 with the goal of creating plastic components. The primary pursuits include: • Manufacturing our own plastic-based goods, • Manufacturing mosquito nets and accompanying parts, • Tool production and design, • Providing services of metal machining, • Trading and wholesale export of plastic goods. In addition to projecting and producing tools, we work with plastic. PLAR Ltd. was established in 2003 with the goal of creating plastic components. The primary pursuits include: • Manufacturing our own plastic-based goods, • Tool production and design, • Trading and wholesale export of plastic goods. Worldwide standards Manufacturing tools for projecting plastic elements, designing equipment for tin processing and machine processing, and producing the previously mentioned equipment are just some of the fields in which the company is continually developing and improving, gaining us the trust of our clients. In the field of production, we work with a top team of employees distinguished by their experience and expertise in the production of a wide range of plastic and aluminum products.

We are a young, dynamic and above all flexible team and finished injection products of cheap mass-produced goods to complex and neutechnologischen small series and prototypes. A spray range of 0.1 g to 500 g / shot is possible with us. We are ISO 9001:2008 certified and translated a zero error rate to our destination. Please feel free to contact us, we will convince you! Our range of services includes: - PVC exception - the processing of all thermoplastics - The processing of various compounds - Parts production from 0.1 gr to 500 gr - In the pressure range of 200 KN (20 tons) to 2500 KN (250 tons) - The production of small series - Custom injection molding process - Custom color mixes - To and gating of inserts - Production of case and removing items - Design and development by qualified designers and CAD tool and Mold maker - Manufacture and sale of drive wheels for table top chains - Assembly and packaging of multi-part articles

We provide the plastics industry with supply solutions and services to improve the operational performance of our customers. With more than 20 years of experience, we are focused on the future of the plastics industry.

The central task of Impetus Plastics Production is the production of high quality, thermoplastic plastic components for the packaging industry with a large standard assortment. Another focus is the production of sophisticated injection molded parts - from the initial idea to the finished component - for the automotive industry and for home appliances, heating and sanitary industry.