System Supplier for: Heatshrinkable tubings, Identification products, Molded parts, Connectors, Wires and cables, Power cables, Braided tubings, Shielded products, Insulation tubings, Electrical products, Heating traces, Heat-conducting gels and furthermore surgical Saw Blades and Burs, Shaver Blades, ..and so on.

ABS GmbH & Co. KG We produce lathes and precision parts in medium and large series according to customer for the processing industry and recommend us for the following work - Automatic turning - Drilling / milling - Grinding Small parts: Even the smallest parts with bores from 0.5 mm are no problem for the production of ABS GmbH & Co. KG. In addition, milling, internal and external thread cut and shaped knurls and eccentric holes and eccentric outer contours possible. Moldings: In the area of the fittings all shapes and outer contours are possible according to modern methods. Again, milling and punctures are possible. Poking Allen, left and right hand threads and slots for screwdriver can be produced. Special screws: The production of special screws with a key width (outside) as a square or hexagon, a company founded a major component of the product range.Very high manufacturing tolerances and special designs were always encouragement of our work. In the after-treatment is chromating, brown, harden and start the last operation to refine our products. At impact the parts necessary rework can be made. Pipes: The parting of tubes up to a diameter of 60 mm and subsequent operations such as slitting, drilling and refining complete the field of activity of ABS GmbH & Co. KG. Materials such as aluminum, stainless steel cutting steel, brass and plastics can be processed. After machining, the parts are deburred in our Trowalanlage.

- Machining of high-precision drawing parts (turning and milling) Sleeves, housings, covers, receptacles, holders, SMA - Prototyping and Massproduction - Al, Brass, Cu, VA, Ti, Mg - specialized in optics & lasers - overnight manufacturing - mounting of assemblies - supplyer of thermoelectric modules (TEC-Peltier.Modules)

Our aim is not only in the realization of the greatest possible precision. An innovative team of specialists is involved with growing importance in designing, developing and manufacturing products. For a tailor-made and therefore cost-effective solution for every task is found in the field of metal cutting technology and laser technology in close dialogue with the client. We see ourselves as a partner for complex problem solving in high perfection. Already in the design phase, we bring our expertise to highly accurate for the customer to produce economically and on time. We place special emphasis on future-oriented technologies.

Surface coatings with techn. (fluor-)resines such as - PFTE - PFA - FEP - RILSAN (PA) - HALAR (ECTFE) - SILICONES - other products for various industrial segments. Non-stick coatings, autolubrification, chem. resistance, electr. insulation.

IMR SpA is known as a leading supplier of high quality machines and services for the casting of copper based alloys. The extensive experience acquired world wide and research carried out since 1959 has lead to the development of Turn-key projects, ranging from the initial feasibility study, through to the supply of all machinery, design aspects, project management and personal training. IMR SpA and its staff are committed to satisfy its customers needs, by setting technological and quality standards, through its research and training centre and by meeting the ISO 9001 requirements. IMR SpA by working in various sectors of research, has developed gravity die casting machines, low pressure die casting machines, core blowers, furnaces, etc. to suit all needs. Within the IMR Group, MASPE, which is the machine tool division, can provide technology and solutions for the machining of components for the ferrous and non-ferrous industry.

Complex sheet metal processing Serial and custom metal production. We process steel, stainless steel and aluminum. We have been on the metal production market for more than 20 years!

Development, manufacture and sales of injection molding, switches, connectors, fuse holders, cable ducts and components thereof, various plastic parts, F / E

CNC - Machining Milling - Sawing - Drilling - Turning Grinding - Threading

Production of CNC turning parts CNC - machined parts and assemblies for precision mechanics, optics, medical, automotive, mechanical engineering.

The firm Rompa CZ s. r. o. belongs to the significant producers of plastic products, thermoformed packaging and tools for both technologies. Rompa is member of Rompa Holding operating worldwide: NL, PRC, HK, CZ, US. Rompa CZ offers complex services in the field of injection moulded products ranging from design of products, designs and production of tools, production of plastic parts to finishing and assembly operations. New thermoforming lines serves for production of packaging materials. We offer complex solution in plastic processing.

MGM are World Leaders in CNC Machining,Our Range of Machining Sizes are Unique to our Customers as they can get all the require from one Source.

Our range of services includes CNC turning, CNC milling, and complete machining on CNC turning-milling centers. We manufacture high-quality individual parts as well as small and medium series. Long-term partners for external contract processing complete our options. Therefore, you will of course receive complete offers from us including heat treatments, Grinding work, surface finishing ect. Certified quality at a high level ISO 9001: 2015; ISO 14001: 2015

We are company situated in the North-East of Czech Republic. We produce metal pressed parts for automotive industry (Wolkswagen, Skoda, Bentley, Continental etc.), stampings for electrical industry (INVENSYS), various building fittings, metalwork according to drawing documentation, production of tools and preparations. We are holder of ISO 9001:2000, ISO/TS 16949:2002, ISO14001 and OHSAS 18001. For more information about our company look at http://www.komas.cz

The company August Feldmann, was founded in 1937 as Lohndreherei for castings in Velbert, then the center of the German foundry industry. In the economic boom years of the establishment of a comprehensive standard parts program for the commercial vehicle, agricultural machinery and automotive industry began. The high manufacturing quality and in particular the ability to create short-term solutions for individual requirements by technical advancements have led to close ties with customers - outside of Germany. So, for example, twisted clevises developed as a replacement for the much more expensive forged copies of the late 50s into an export success. 1972 & Co. KG was the transformation take place in a limited company. Partner is the August Feldmann GmbH. The limited partnership is 100 percent family owned. The management is responsible since 1995 Dipl.-Ing. Christian Feldmann.

Our company was founded in 1948 and has been owned by the family From Mr. Rudolf Hartig after the Second World War with the production of curtain rods. Since then, the raw material was scarce was on cans from the American "Care - packages" resorted. They were then rolled up and cut into a continuous strip and is pulled into a tube. Due to the settlement of the distributed Gablonzer from Jablonec nad Nysa (modern Jablonec in the Czech Republic) in the area of the former Austro - Dragoons - barracks in Enns the company Hartig became a supplier to the fashion jewelry industry. This remained the case until Mr. Friedrich Zimmermann 1979 the company took over. The company was richer by a business through his experience in the field of construction. Mr. Zimmermann has recognized very early that the field of fashion jewelry in Austria has no future. That's why the company established on the basis of in Steyr (20 km) Automotive industry has been restructured to a subcontractor this.This started with the delivery of various spare parts for production lines. Among other things, we produce for you: Covering devices, racks, shelves, distance teaching, Absteckdorne, Absteckvorrichtungen, Absteckwerkzeuge, support plates, Pullers, extractors, Abziehzangen, axles, adapters, adapter plates, stops, stop plates, Rests & bolts, recordings, locating pins, mounting plate, cradles, fixtures, balancing devices, ejection devices, Ausrichtbacken, Ausschleifvorrichtungen, thrust plates, blow pipes, bolts, width gauges, bushings, brackets pliers, CE - markings, cover, disassembly tools, disassembly pliers, spacers, pins, turning parts, turntable, rotating devices, pressure pin, die casting tools, plungers, nozzles, crimping tools, Applicators, Press-In, gages, Entriegelungszangen, retaining pliers, grease dispenser, Finish devices, pins, fittings, Frästei

ROTOLIA is a company dedicated to manufacturing plastic parts for all industry sectors. We use four of the thermoplastic technologies most widely used in plastic processing: ROTATIONAL, INJECTION, THERMOFORMING and BLOWING. At ROTOLIA we advise our customers on the most suitable thermoplastic technology for each project, offering COMPREHENSIVE MANAGEMENT thanks to having the ideal machinery and design team for each phase of the project. ENVIRONMENTAL COMMITMENT All our production has been recyclable since 2018, making it 100% recoverable. We are 5 years ahead of the European Regulation. Between 2020 and 2023, we aim to minimise waste and work with natural additives such as rice husks and almond shells. 50% of our production will be from recovered raw materials by 2025 CIRCULAR ECONOMY ROTOLIA works alongside several organisations and foundations to give a new life to plastic mate- rials taken from our oceans and landfills, promoting the circular economy. For ROTOLIA, contributing towards the sustainability of planet Earth by extending the life cycle of products is an essential aspect. PROJECTS At ROTOLIA we provide plastic solutions to a wide range of industrial sectors: automotive, energy, agriculture, food, metal, decoration, health... Counting on the four most widely used technologies in the treatment of plastic allows us to complement projects and produce parts of the same product with different technologies, thus ensuring the highest profitability and precision. The success of each project lies in customising and applying the right technology in each process.

Manufacturer of Nuts and cold formed parts to DIN EN ISO or drawing in steel, light alloy and nonferrous metals, COMBY®-Nuts

We deal with turning and milling of all kinds of materials. Medium to large batches We are equipped with two CNC lathes (OKUMA and MORI SEIKI) and two CNC milling machines (MORI SEIKI and KITAMURA) We have a smaller team of people, so it is easier to control only the production of the pieces