We offer over 20 years of experience in CNC precision turned parts and Automatendrehtechnik. Foundation of Birk CNC precision turned parts in February 2006 by Dipl.-Ing. Maschinenbau Gunther Birk in Wehingen. In March 2008, the company is founded and appointment of Mr. Siegfried Häsler, metalworking foreman, as CEO. In March 2012, the company moved Birk CNC precision turned parts to new premises after Spaichingen. We produce with high precision machinery quality Made in Baden-Württemberg Products Our long experience in machining guarantees consistent optimum quality and precision in every detail. The company Birk CNC precision turned parts GmbH is certified to DIN ISO 9001:, 2015. Production of CNC turning parts of any kind with cross holes, off-center drilling, milled surfaces and contours, as well as key areas. CNC short turned parts: Machining from bar up to diameter 55 mm Chuck parts up to 250 mm diameter CNC sliding parts: up to diameter 32 mm Numbers: - Small to large batch sizes possible. - Prototyping Automatic Screw Machine Parts: For larger quantities, we have the opportunity on our cam lathes with less complex geometry and tolerance requirements, various rotary components such as: - Bushings, nuts - washers - Spacers - Sleeves and the like economically and inexpensively. Diameter up to 42 mm. Ask for an obligation-free offer for you. We process the following materials: - Hardened steel - stainless steel - Tempered steel - steel - Aluminium - Plastics - Titanium - Brass Other materials on request. We supply so far the following industries: - Medical - Engineering - Electrical Industry - Sensor technology - Aviation

Besafilm is a family-run company of Colognola ai Colli (Verona), founded in 1987 thanks to the happy intuition of Santino Beltrame, father of Youri Beltrame, today owner and sole administrator of a reality with a great tradition, rooted in the territory but oriented to the future and to continuous technological evolution: capable of providing a third-party service for any industrial sector. Our company, expert in cutting and rewinding from roll to roll, in particular plastic and paper, is today able to cut any material. We have moved from an artisan company to an industrial company with excellent manpower. All this thanks to the work carried out by around 30 employees, who work 24/7, thanks to a fleet of re-reeling machines that represent the best in circulation, capable of guaranteeing high precision work . Investing is our philosophy. We are investing in a series of modernization interventions, both structural and of an IT nature, which will project Besafilm towards a further technological evolution, to respond to every kind of request from our customers. Like 3D printing, a fast, innovative and highly personalized service.

Construction: Development of injection molds, turntables and turnaround units Optimization and analysis of plastic parts with Autodesk Moldflow 1 team - 9 people, consisting of toolmakers, technicians and technical product designers Project support up to series approval Construction of about 60 tools per year Our specialties: Multi-component molds Index Tools Stack molds injection molding Production of small series and series in three-shift operation 30 employees Modern Arburg and Demag machine park with 15 machines 1200m² production area 2200m² storage area

For more than five decades we see ourselves as a reliable and innovative partner of all branches of industry. The satisfaction of our customers results from constantly high quality level, efficient order processing and project-related appointment organization. Our range of services includes the production of individual parts or small batches up to the development and projecting of sophisticated special machines. Qualified employees and state-of-the-art engineering and manufacturing facilities are ready to give shape to the ideas of our customers. In order to implement our corporate guidelines and to achieve our goals, our company has decided to introduce a process and customer-oriented quality management system based on DIN EN ISO 9001: 2008.

We are a newly founded company that specializes in small to medium series in the field of turning and machining. With our cnc lathe from DMG-Mori we can produce workpieces up to a diameter of 410 mm, and a length of 800 mm. Automated series production is possible up to a diameter of 82 mm. Our machine has a Y-axis, which allows us to be very flexible with our driven tools to respond to the needs and requirements of our customers. Our strength lies above all in fulfilling customer wishes quickly and effectively. In a personal conversation we will be happy to inform you about our possibilities.

Osthoff precision mechanics deals with the production of mechanical components made of ferrous and non-ferrous metals including hot or surface treatment. With modern machinery we can process in one setting when producing complex qubischen and rotationally symmetrical components five or more pages. The advantages are shorter lead times, precise positional tolerances, no re-clamping and a better quality / price ratio. 1980 Company founded by toolmaker and master mechanic Horst Osthoff. Repair and rebuilding of HSS and solid carbide special tools. Parallel conventional production of turned parts for the tool. Mid-80s conversion of the machinery on ground-controlled machine tools, CNC milling and manufacturing focus. 1986 Development of a universal multi-position measuring system, in particular for use in rotationally symmetrical parts. This measuring system is trademark protected. 1995 Development of a device for the removal of Abstechbutzen of turned parts, with subsequent patenting in Germany and in the USA. Since then, complete machining of mechanical components made of ferrous and non-ferrous metals, including hot and surface treatment. Primarily production of small series with numbers from 5 to 200 pieces, but also series of up to several 100 parts. 2001 Introduction of a quality management system certification, the company according to DIN EN ISO 9001/2008. The customer base is located in the mechanical and automotive engineering. Own developments: * Butzenentferner * Universal multi-point measurement technology

The Kaiser Development, production and sale in the following areas: Technical Plastic Parts Tool and Die Mechanical Parts Manufacturing Assembly in the automotive, medical, office and household goods.

Modern production technologies joined with quality solutions. At Jerger, our philosophy is just that simple. We dedicate ourselves to the needs of our customers and the market. We are a recognized supplier of quality – a status we have achieved over the decades through our high degree of automation and our stringent quality control. Well-known and long-standing customers from various industries attest to the proven value of the Jerger philosophy. If you are working with steel joining technology, it is good to know Jerger. Jerger is an exceptional competitor in today's hotly contested market. The combination of automation and a constant drive to innovate have played a primary role in allowing us to process several thousand tons of steel per year. Our cutting edge company meets the challenges presented by the the price war that has now become common place in the industry with high flexibility and a standard of quality that has won loyal customers all over the world. Jerger KG exports quality joining technology throughout Europe, to the USA, Canada, South Africa, Australia and to Asia – all signs indicate continued growth in the future. processing techniques: milling, boring, punching, thread cutting, turning, etc., can be used on both sides of the workpiece without problem. Particularly in the area of possible cross processing techniques (multiple cross threads and/or cross holes) processed material: round material in the diameter range of 4.5 mm to 18 mm profile material such as a hexagon (SW8, SW10, SW13) or a square (4, 5, 6, 7 mm diameter) standard material machining steel (11 S Mn Pb30/37, 11 S Mn 30/37) brass stainless steel (1.4305)

Since 1992 we are specialized in fine blanking of precious and refractory metals, in scribing, cutting and drilling of ceramic substrates as well as marking and engraving by use of different laser installations. Our broad range of lasertypes and -technologies allows us to produce devices and semi-finished products according to your task. We process and use materials for toolmaking and mechanical engineering, the aerospace industry as well as automotive- and medical engineering. Customers of our company include manufacturers of moulds and tools, microelectronic devices, hybrid- and medical technology as well as engineering ceramics. Our manufacturing includes by default: scribing, drilling, cutting of thick- and thin film substrates fabrication of sputter masks, grind- and lap cages contour cutting in pipes engraving of copper- and graphite electrodes marking of labels, ceramics, plastics and much more Additional services are: single component measurements for geometry and surface repair service for older laser systems application-oriented purchase advisory service for new laser systems process-specific research

The Nowack Company was founded in 1932. In its early years, the firm specialised in the manufacture, processing and printing of natural corks. With the increasing use of plastic in the beverage sector in the 1950s, the company put its first injection moulding machines into operation. As markets continued to grow and become more demanding, the firm made parallel endeavours to widen its range of plastic articles and expand into other sectors. The move to the Lohne Industrial Park in 1972 proved to be decisive, as it offered the company the space that it required to continue to develop and grow. Various expansions in the production area throughout the 1980s and 90s allowed the company to move into further sectors, such as toolmaking, serigraphy and dabber printing. The year 2003 was marked by the construction of the new administration building and the addition of a further 1000 square metres of production floorspace. As you can see – Nowack is a firm that gets things done. And it intends to remain that way. We fully intend, now that the company is being run by a third generation of managers, to carry on doing everything within our power to have a positive influence on cooperation with our customers both old and new. Our sense of commitment is what makes us your reliable, quality-conscious, full-service provider in the field of plastics technology.

f.u.n.k.e. PLASTICS GmbH is a strong partner for companies in industry and medium-sized businesses. With the know-how accumulated over decades, parts with the highest demands on quality and precision can be produced today. To this end, parts are manufactured for our customers, who come from the demanding fields of electronics production, aeronautical engineering and the medical and pharmaceutical industries, among others, using plastic injection moulding (1K and 2K), assembled into subassemblies, labelled and labelled, and in some cases tested using 100% automatic testing machines developed in-house. It is important to us that we support our customers in finding solutions. To do this, we take innovative approaches and incorporate new technologies and materials, such as recycled or biological plastics, into our processes. f.u.n.k.e. means: fabrication, utilities, network, know-how, engineering Services of f.u.n.k.e. PLASTICS at a glance: -single and multi-component injection moulding -tool/mould and prototype construction -manufacture of composite inserts -Ultrasonic welding -mirror welding -UV LED printing -Screen printing -tampon printing -hot stamping -other processes on request.

We offer LASER cutting and other NON-METALLIC PLASTIC substances in 2 - and especially 3-dimensions. We are a job shop or job shop specializes in the machining of various materials, shapes and components. Our versatile know-how ranges from sophisticated prototypes to serial production. Components made of the following materials, we have been successfully laser-cut: Plastic: ABS, ABS films, Acryl-/Plexiglas (PMMA), Axprint, High Density polyetylene HDPE, PE 300, PS polystyrene, polyamide PA, PA 6, APET, PET-G, POM, Teflon (PTFE), thermoformed components , Composites: glass fibers, carbon fibers and Kevlar fibers (aramid), carbon fiber, fiberglass, natural fiber reinforced plastic (NFK), glass mat reinforced thermoplastics GMT, Nomex, Nomex honeycomb, sheet molding compound SMC, WPC Wood Plastic Compounds Foam: EPS, PPS, ETH 200, LD 29, Armaflex, polystyrene Saddle

About us We, the Rex Industrie-Produkte Graf von Rex GmbH is a medium-sized company with about 75 employees. The company is based in Vellberg in the Hohenlohe region between Schwäbisch Hall, Crailsheim and Ellwangen. We have specialized in niche applications: Technical textiles for heat protection and insulation Insulation products of inorganic / organic fibrous raw materials for fire, heat, cold and sound insulation Fire protection products for building construction Friction and sliding materials (REX 2000) for industrial applications Moldings in vacuum forming Metalworking for mechanical engineering and special engineering Our products are customized and application specifically designed depending on the problem. They are characterized by excellent technical characteristics and consistently high quality. They are quick, handle clean and safe. Our main areas of application are mechanical engineering, shipbuilding, railway, power plants, military and industrial standard and special solutions. The introduced and practiced quality management system is certified according to DIN ISO 9001:2008. Furthermore, the quality management system for certain products, correspond to Module D (production quality assurance) of Directive 96/98/EC on marine equipment and is regularly reviewed and certified by the See-BG.

CZIOTEC - "Precision for better Quality" The CZIOTEC GmbH is a company with more than 100 employees. We are a recognized training company with about 20 training places. In diverse occupational groups we enable a successful entry into the professional life. We have been certified since 1997 according to DIN ISO 9001 and since 2012 welding to EN 1090-2. Our strength is the high level of vertical integration. We accompany the customer from the initial idea for a product to series production and beyond.

The PEUS Testing GmbH, based in Gaggenau (Northern Black Forest), is a modern and professional test center for the automotive industry. The second pillar of the company is the field of tool. We offer • Tool • jigs and fixtures • Series production • Individual Manufacturing We guarantee a flexible and individually appropriate customized production in the field of tool making. The CNC machine allows low-cost and continuous production: We manufacture your items or even a series production. Machine fleet: • Bridgeport VMC 1000/30 Heidenhain 426 + dividing head 4 +5 axis traverse X1000 Y500 Z500 • Super quick-turn 18 Mark ll - CNC Lathe • Lathe-Conventional • Wig-MAC Mig welding • CAM software: CondaCam

Ladies and Gentlemens, MECATYP- KS subsidiary of MECATYP SA in Switzerland is active in production of mechanical precision parts as requested. We produce mechanical precision parts with high technology with Swiss Quality and graduate staff in Switzerland. We guarantee quality, quick response to your requirements and shipments in due time. It would be pleasure if you accept our offer of partnership. We are ready to offer you the same offer from our branch in Kosovo with Swiss quality but with better conditions. To satisfy the needs of our customers, we use the following techniques : Machinery in production line: 1. Tornos Deco 10A – form Ø 2 – 10 mm; Quantity from 500 – 1 000 000 2. Tornos Deco 13A – form Ø 2 – 16 mm; Quantity from 500 – 1 000 000 3. Tornos Deco 20A – form Ø 2 – 25 mm; Quantity from 500 – 1 000 000 4. Tornos Deco 26A – form Ø 2 – 32 mm; Quantity from 500 – 1 000 000 5. Brother TC31A - up to 350 x 350 x250; Quantity from 10 – 10 000 Surface treatments Assembly and testing We are specialized in productions and assembly of precision mechanical parts for different fields of industry like: Auto Industry, Micromechanics,food Industry,Medicine, Mining, etc. Also we use a different of raw materials like,Steel, Stainless Steel, Brass,Aluminium, Cooper, Plastic, Titanium, etc. For more information you can visit us in www.mecatypks.com or you can take information in direct phone line.

CNC manufacturing technology = expertise from experience Years of experience and a professional approach that draws CNC manufacturing technology from. Convince yourself of our in-depth knowledge and personalized service! Our advantages: • collision-tested NC programs •Reliable • Customer focused • Cost

The Mill Point GmbH is a young company in metalworking. With the location in Arbon, we have an interesting supplier of workpieces of all kinds, especially for Eastern Switzerland. Through our years of work experience, we have specialized in the milling. Thanks to the high flexibility, we can finish and provide short-term orders on time. Our strengths lie in the Express-production. Today's market demands ever faster delivery of the same quality, and therein we are the best. Complicated or just simple items and series are no problem for us. Quality and fair prices are our priority !!! Translation by Google Translate