Custom-Made Solutions for Individual Products In accordance with customer demands and wishes, ISOVOLTA – in addition to manufacturing high-quality laminates in the form of sheets, tubes and rods – also offers processing of thermoset materials. Different materials are shaped by processes such as cutting, grinding, drilling, turning, milling, gluing, mounting, punching, jet cutting or painting according to individual customer specifications. Based on our expertise in material-specific selection and production-technical implementation as well as our years of experience in job shop, serial, and mass production, we are able to develop the best possible process for each product. Range of Materials Phenolic Cellulosic Paper / PFCP Phenolic Cotton Cloth / PFCC Phenolic Glass Cloth / PFGC Melamine Cotton Cloth / MFCC Melamine Hard Glass Cloth / MFGC Epoxy Glass or Glass Roving Cloth / EPGC Epoxy Glass Mat / Polyester Glass Mat / EPGM / UPGM Melamine-Lined Hard Paper / MKHP / INBORD® Silicone Glass Cloth / SIGC Special Laminates / Special Materials / CFRP, KP, PIGC MAGNOVAL® CONT AVAL® GX_11.3309 GWS RP High-Performance Rings GF-UP / GF-EP ISOVAL® R-AL Competence in Soldering Equipment Soldering Frames are primarily used to transport PCBs in soldering machines while simultaneously fixating “through-hole components” by using Top Hat Systems. With our specially developed ESD material, which is able to endure high temperatures and chemical resistance, the ISOVOLTA Soldering Frames are able to withstand thousands of soldering cycles. ISOVOLTA Soldering Frames and masks are custom-made innovative products. The design of the mask is defined by the PCB, the machine and the customer`s requirements. Possible combinations of the ISOVOLTA Universal Frame, ISOVOLTA Soldering Frame and the ISOVOLTA Flexible Suppressing System. (ISOVOLTA Suppressing System: ensure suppression and alignment of critical PTH components.) Combination ISOVOLTA Soldering Mask and ISOVOLTA Suppressing Panel for reliable and accurate alignment of PTH components. Innovative solutions guarantee quick and comfortable handling. Product combinations Top Hat Systems Universal Frames Flexible Top Hat System Magnetic Carrier Coating Frames Pressfit Tools Router Tools Hand Soldering Tool

KOMOS GmbH: Your product idea becomes success. KOMOS is an industrial service provider with the highest standards of product and service quality. For more than three decades, the company has been manufacturing high-quality products made of metal, plastic and composite materials, also in combination with electronics and electrical engineering, on behalf of customers with a competent team and modern machinery. With its hybrid technology network of stamping, turning, forming and injection moulding, in-house research & development, assembly and packaging and many other services, KOMOS can realise almost any product vision at the highest level. Innovative with a system - for more than 30 years: At KOMOS, a 2nd generation family business in Bürgel, 75 employees develop and manufacture high-quality products for the medical technology, automotive, electronics, aerospace, construction and mechanical engineering sectors. The claim is always a long-term trusting partnership with the customers - for successful products, guaranteed 100 % Made in Germany. https://www.komos.de/unternehmen/ Production technology follows function. Punching and forming, plastic injection moulding and CNC turning, processing of plastic, metal and composite materials: KOMOS offers an extraordinary manufacturing breadth and depth under one roof in its unique hybrid technology network - together with its own R&D department, assembly, packaging, logistics and much more. In this way, it is not the technical possibilities but only your requirements for your new product that decide on the manufacturing. Learn more about our manufacturing technologies! https://www.komos.de/fertigungstechnologien/ KOMOS product strategy. Success for you. At KOMOS, we are open to your ideas and visions - and always ready to transform them into market-ready products with full commitment. This is done using a consistently applied methodology: from understanding your product idea as part of a non-binding initial consultation, through technical anamnesis, rough concept with proposed solutions and fine-tuning, to precise production and further processing. https://www.komos.de/produktstrategien/

GTK-Prototype UG was founded in 2014 by Tobias Günther and initially dealt with rapid prototyping machines. Over the years, CNC milling and turning as well as assembly and development work were added due to customer requirements. GTK-Prototype develops and designs on behalf of customers as well as internally using the most modern CAD systems such as Solid Works, Autodesk Inventor, Fusion 360 and others and inserts them into a comprehensive CAM system. Through the production of prototypes in medical technology, mechanical engineering and the automotive sector, GTK-Prototype was able to acquire extensive experience in manufacturing. In 2018, the production option laser cutting was added. GTK-Prototype is currently based in Neuhausen near Tuttlingen and will move to the newly built company location in Radolfzell in the course of 2022.

BC ITALIANA is a company with over 50 years of experience in both product engineering and plastic injection moulding of complex components. Currently the moulding department (4,800 square meters out of a total of 6,100 available) consists of 30 machines with 50 to 1,000 tons clamping force: this great difference of tonnage allows the moulding of micro components up to large or medium-sized parts. Furthermore, some plastic parts are produced by nitrogen moulding technique. This process can avoid functional, structural and aesthetic problems that sometimes arise with traditional moulding methods. BC ITALIANA manufactures, according to the highest quality standards, a wide range of products belonging to many industries: from automotive to rail, from medical to musical instruments. The main competitive advantages of BC ITALIANA are the long-time experience in engineering and moulding of complex plastic components, both from technical and aesthetic point of view. So, when it comes to dealing with customised and complex plastic parts BC ITALIANA performs at its best. Co-design, problem solving and extremely cared injection moulding are BC ITALIANA special services for all its clients.

Professional machining Mikron was established in 2017. We specialize in machining services including, among others, CNC milling, CNC turning, conventional turning, drilling, threading and cutting. We execute both individual and serial orders using materials such as steel, stainless steel, aluminum, copper, bronze, brass and plastics. We have a well-equipped workshop and use new technologies, thanks to which we implement details to the production according to the documentation and provided patterns. We produce for companies from various industrial sectors, e.g. automotive, agricultural, electrical machinery, hydraulics and pneumatics sectors. We stand out on the market for the high quality of details, which goes hand in hand with competitive prices and short deadlines. After processing, all details are subjected to precise technical and measurement control. Our qualified staff allows us to adapt to the individual needs of customers. We are open to cooperation with contractors in the country and abroad. If you want to learn more about our offer, please contact us. We stand out for:: high quality of details, modern machinery, experience in the industry, use of modern cutting tools, technical and measurement control, programming based on the provided technical drawing or detail model, short lead time, competitive prices. We address our offer both to large companies and individual customers. Thanks to qualified staff, we guarantee you that each service will be made with the utmost care and precision. Our services: CNC Milling vertical 4-axis machining center of KAIDA KDVM 800L model, working surface 800x530x530mm; vertical 3-axis machining center of LEADWELL VMC 40, working surface 1020x520x520mm. CNC Turning CK6150x1500 CNC turning lathe, turning length 1150mm, turning diameter over support 270 mm; BT-300L CNC turning lathe with bar feeder, turning length 750mm, turning diameter over support 410 mm. Conventional turning Universal turning lathe KNUTH TORRO 250, turning length 2000mm, diameter 400m. Cutting diameter to 320mm CORMAK G5025 band saw, cutting diameter 320mm.

The Dr. Dietrich Müller GmbH, based in Ahlhorn (Lower Saxony), has long proven itself as a successful service provider for the manufacturing industry. The focus is on the development and implementation of customized solutions for the manufacturing processes of the respective partners. The Dr. Dietrich Müller GmbH is one of the world's largest suppliers of electrical insulation materials, seals and heat conducting products. The company is certified for quality management according to ISO 9001 and listed as a recognized repackager by UL. This means that all UL-approved materials retain their approval. Solutions for motors and generators We develop, manufacture and supply flexible and rigid electrical insulating materials for motors and generators using materials from leading manufacturers worldwide. All insulation parts can be supplied by us. Solutions for air and oil cooled transformers The insulation system is crucial for the service life and functionality of oil transformers and dry-type transformers.We deliver ready-to-install individual parts and kits. Solutions for electronic products In addition to electrical insulating materials for electrical insulation, we develop, manufacture and supply products and systems for cooling electronics, particularly in the fields of medical technology and aerospace. Solutions for mechanical engineering and vehicle construction Composite materials are becoming increasingly widespread in mechanical engineering and vehicle construction. We support in the development and manufacture of ready-to-install parts and systems. Solutions for batteries and accumulators We supply insulating films, battery separator films and thermally conductive materials. Support for research, development and universities With the multitude of manufacturing processes and available materials, we are the right partner for solving your challenge. We process ul-approved materials from leading manufacturers.

3D-Konstruktion Bayerlein GmbH is an owner-managed family company with decades of experience in the field of printing, pressing and injection molding tools. Starting in the area of design, the company has matured into an all-rounder in the field of tool and mold making through continuous growth and development. By constantly investing in new technologies and machines, we are able to implement our customers' ideas in the highest quality on time. Due to the high level of commitment and flexibility of our employees as well as the necessary know-how, we are able to efficiently implement the increasing individualization of your components. Small to medium-sized series production of components is no problem thanks to our automatic changeover machines. Our core business is the design, development and manufacture of die, press and injection molding tools. Thanks to our 5-axis milling technology, we are also ideally positioned for HSC contract manufacturing.

Werner Breitschädel GmbH has been active in the field of machine and tool construction since 1950. For our satisfied customers we manufacture precise tools and mechanical engineering and plastic parts. To carry out our orders, we have a team of highly qualified employees who are always up to date with the latest technology thanks to regular further training.

At our sites in Kornwestheim,and Mosbach we manufacture technical plastic injection molded parts both in large series with annual quantities of over 1 million pieces and small series with annual quantities of 1000 pieces. Efficient production lines always guarantee you the best price. The required injection molds are manufactured in our own mold shop or ordered from our network of German and Chinese mold makers. Metal parts to be overmolded are mostly purchased from our sister company located 30km away. Our customers therefore receive their plastic parts directly from one source. On modern plastic injection molding machines we produce plastic injection molded parts from all thermoplastic materials with a weight of less than one gram up to 3kg. As an injection molding specialist, we process almost all conceivable plastics for the production of technical plastic parts. A high degree of automation of our injection molding process allows us to produce molded parts in small, medium as well as large quantities within our injection molding shop. A large portion of the injection molding machines are equipped with robotic systems and material feed conveyors. Machinery: We use only high-quality ARBURG and DEMAG injection molding machines for the production of your plastic parts. In total, we have access to a capacity of more than 25 injection molding machines. Injection molded parts can be produced with a part weight of 0.1g to 3000g. Injection molding machines are available for this purpose at the Kornwestheim, and Mosbach locations with clamping forces of 20- to 1300-tons. Injection molding materials: We can process almost any plastic material ("molding compound") in our injection molding machines. All common raw materials, such as ABS, PA, PE, PP, PET, PMMA, PC, POM, PS, ASA, SAN, TPE (in various shore hardnesses) but also high-performance plastics such as PEEK, PVDF, PSU as well as bioplastics and WPC (wood-plastic compounds) with wood content of up to 70%. Of course, all individual colorings are possible as well as the equipment with various additives (UV resistance, antistatic, etc.), fillers (glass fiber or glass ball) and of course also in V0 equipment (fire protection and glow wire resistance). We are looking forward to your inquiry!

Expyou srl is specialized in the design of molds in the molding of plastic injection and blow molding items. We have an efficient mold construction department, we use aluminum and steel to meet the needs of the customer In addition to the Italian reality, we have a very competitive foreign production site for both molding and assembly. Our strengths are the punctuality and the quality of the supply,

founded in 2011 in 2015 we built a new machining shop → Milling / Turning / Welding / Flat Grinding / EDM / Injection Molding / Laser Engraving Raw materials: Aluminium, regular grade steel, stainless steels, tool steels, ductile iron, plastics well accessible possibilities of surface treatments (elox, phoshpat, browning, zinc, nickel, powder coating etc.) and heat treatments customers - machine tool manufacturers, packing and textile industry, automation, special machinery, railway, aviation and others) additional activities: development and manufacturing of professional working benches (SMW Workbenches) with accessories (e.g. tapping devices) Engineering - special purpose machines, Special clamping jigs, fixtures mold making, plastic injection molding capacities available we are - flexible and competent team with international experiences we speak german / english / russian / czech we offer - long-term, stable and fair partnership

Gärtner & Lang GmbH is a down-to-earth, successful, privately owned company and manufactures high-quality products for the automotive industry. You will find our parts and components installed in almost every vehicle that is on the move in Europe. Our core competence is the injection molding of plastic parts from difficult and complex materials. As a recognized partner of the automotive industry, we manufacture our products in two factories on a total of 17,000 square meters and 3,800 square meters of production space with 23 injection molding machines and around 63 employees - around 110 million plastic injection molded parts annually.

Welcome to Haller GmbH, tool making and plastics processing. For over 50 years we provide technically advanced injection tools and plastic parts for various branches of industry. We are an independent and independent family with currently 70 employees. It is very important for us the personal, customer-oriented consulting. The basis for dialogue with our (your) customers is our employee team with extensive experience and expertise in the individual technical areas of the company - development / Kons- truktion, tooling, plastics processing (less than 1 gram to 800 grams of excess weight), printing and assembly. We also offer logistics solutions as kanban, JUST IN TIME or consignment stores at. Moreover, we also accept contract injection jobs Working together with you, we want your concepts partnership schedule and innovatively implement.

Welcome to HamProTech Speed, reliability and quality are the three characteristics that we claim for ourselves take and make available to our customers. Our manufacturing portfolio includes injection-molded parts for prototypes, pilot and small series as well as functional models. We produce exclusively on Demag injection molding machine parts from 1 to 300 g, with or without inserts. We manufacture for the medical and aeronautical engineering, the automotive sector, building services, electrical and Safety technology and support engineers or project teams in the realization and manufacture of sophisticated initial samples. We see our strength in our long-term Experience and our results-oriented project implementation. We guarantee fast and reliable solutions to ensure a high quality of your products. HamProTech offers the injection molding production also own tool. There only injection molding tools are manufactured for over 30 years. In this combination, we are able to guarantee the fastest possible processing times and your products - finished on schedule and cost - from the prototype to series production. We look forward to you and your challenges! Translation by Google Translate

History In 1951, Ernst and pink Thoma a mechanical workshop in Ruthi (in St. Gallen Rhine Valley) to perform inspections and repairs of machinery and equipment. In 1983, his son Kurt Thoma is a competent successor of Ernst Thoma. With it, the new wave of innovation came with the CNC machines in motion. 2009 true a landmark year. Despite the crisis, Kurt Thoma bought the Glessmannareal in the village of Ruthi in the St. Gallen Rhine Valley in order to increase its production area. In parallel, the company erführ conversion to a corporation. The shares remain in family ownership. Services In the areas of CNC machining service, troubleshooting and system business for our customers, we accept responsibility as general contractor for all order sizes - from prototype to large orders - and pay attention to the time production position with the best overall quality. In collaboration with our expert partners from different areas, they get a solution for even the largest and most complex problems from a single source. Our offer includes series and custom made, prototyping, construction of machinery and equipment, and the manufacture of spare parts and the implementation of machine controls. We support you for the Fertigungsotimierungen. The individual technical production machining is carried out on modern machines for operations such as turning, milling, flat grinding, drilling and welding. Various materials such as aluminum, steel, stainless steel, bronze, brass and plastics are processed.

FSM Stamping GmbH Two locations in Brandenburg, close to Berlin. 20 presses of 80-1600 t and various assembly and welding systems for the ZSB production of punched and formed parts.

Netmade is a dynamic Business Network of 5 Italian SMEs from the industrial district of Reggio Emilia (Italy), that decided to join together, share values, skills, expertise and enter the market as single entity, in order to offer a 360° view on the Rubber & Plastics world. Netmade has set as its goal to follow Customers' projects providing them a complete service as sole supplier in many different fields: R&D, product engineering, mould construction, plastic injection moulding, thermoforming, blow moulding, rubber processing, post-production workings and finishings. We are offering: 61 Injection moulding machines, from 8 to 650 tons, for the following technologies: - Injection moulding (60) - Injection moulding around inserts (61) - Doubleshot moulding (1) - Transfer moulding (1) - Micro injection moulding (1) 6 Blow moulding machines, from 40 to 120 tons, for the following technologies: - Extrusion blow moulding 34 Compression machines, from 5 to 300 tons, for the following technologies: - Compression moulding 2 Injection compression moulding machines, 100 tons, for the following technologies: - Injection compression moulding 24 Rubber injection moulding machines, from 60 to 300 tons, for the following technologies: - Rubber injection moulding 8 Thermoforming machines, from 800*1200mm to 2500*3500mm, for the following technologies: - Thermoforming 1 3D Printer, for the following technologies: - 3D Printing 4 Ultrasonic welding machines 4 Lathes 6 CNCs 5 Sinking EDMs 1 Wire EDM 6 CNC milling machines 1 EPS foaming machine 7 CNC cutting robots 1 Cutting machine 1 Hot bending machine 2 Hot plate presses

About us With our industry expertise, we can help you successfully and promptly implement your production project for mechanical components, assemblies, and housings for small to medium-sized series. For more than 20 years, we have been experts in die casting, injection molding, and other mechanical processes. Our focus is on cross-process thinking. In Germany, Europe and Asia (in-house certified production) we manufacture your mechanical components, assemblies or housings. Our manufacturing services include: Engineering: Technology consulting (wide range of materials and manufacturing processes); CAD evaluation, construction & development Prototyping (close to series production; 1,-3,000 pieces) for die casting, injection molding, precision casting, sand casting, PA casting, vacuum casting, CNC milling, SLS & SLY Series production for batch sizes of up to 25,000 units Metal: aluminum die casting, zinc die casting, deep drawing, gravity die casting, sand casting Plastics: injection molding, thermoforming, extrusion Our Services: Project-related surface finish Coordination of the entire production project Advice along the value chain Assembly service, measurement reports International logistics service

Roth plastic + form GmbH has been active in the field of injection molding technology for more than 50 years. At our locations in Balingen (Germany) and Veröce (Hungary) we produce sophisticated injection molded parts for the automotive, appliance and electrical industries with a total of 80 employees.