Cable manufacturer for PVC cables with cable assembly in the range of 220 volts to 700 volts, injection technique, owner-managed company

With Connfix GmbH as a system supplier, your processes are optimized and cost savings achieved. Together with our network partners, we produce customer-specific drawing and special parts in the field of turning technology, casting technology, stamping and bending technology as well as assembled rubber and corrugated metal hoses, which are produced in our factory. We accept the most varied of requirements and support you from the development of the prototype to series production. Our customers already include well-known OEM manufacturers (automotive, plant, machine and shipbuilding) References can be sent on request.

We produce plastic parts with a wide variety of manufacturing processes, including injection molding and thermoplastic foam casting parts and process them according to customer by ultrasonic welding or hot embossing. Currently we supply our products to the mechanical, electrical and packaging industries, in addition, we have specialized in the processing of high-performance plastics for precision parts. Thanks to our partner company, we can also offer components and Asia. We manufacture in Asia components from the following areas: Injection molding thermoplastics, elastomers and injection molding deep drawing.

Plastic Injection Moulds Manufacturing

FOPEX Plastic company has been founded at October 2004. During its short existence it reaches trust of its partners around the world because of its top quality work and liable spirit. Ourmain subject of manufacturing ist: manufacturing of plastic pressed elements for automobile industry, electrotechnical engineering and home appliances ultrasound plast welding assembly of plastic pressed semi-products and elements Our goal is: to provide services at world-wide quality standards to implement modern trends at plastic processing to improve a qualifications of our employers to minimize negative impact for enviroment to the lowest possible level

Industrial Technology & Medical Development:  Brainstorming on customer requirements using 3D CAD and installation simulations  function tests using sample production  precise optical measurement of project start  customisations, yet during the sampling phase, to customer-specific packaging  special processes for further processing or for special treatments arise in the house  rapid change solutions existing products through customer-oriented production  continuous process monitoring for safe and certified production process are self-evident Process Engineering:  injection molded thermoplastics: Material: ABS, CPVC, HDPE, PA, PAA, PC, PMMA, POM, PP, PPE; PPS, PS, PSU, PVC soft, hard PVC and TPE Part weight: depending on material up to 500 g  multiple extrusion thermoplastics: Material: C-PVC, EVA, HDPE, LDPE, PA6, PA12, PB; POM; PU, PSU, PVC soft, PVC-hard; TPE Processing: Tubes and pipes: of Ø2 to Ø40 mm Profiles: from 5g to about750 g per meter, depending on the Profile geometry Seals: hardness of 20 ° to 90 ° shore A, for window and Door construction, fire protection seals, as well as Industrial applications  extrusion silicone rubber: Material: A variety in colors with hardness of 40 ° to 80 ° Shore; Operating range: from -80 ° C to +300 ° C, excellent UV and Weather resistance, can not become brittle as plasticizer-free; excellent recovery properties as rubber-based (Compression set much lower than with soft PVC), chloride and plasticizer-free Processing: Tubing: 2 mm Ø of up to Ø25mm Seals: for windows, doors, furnace, plant, equipment manufacturing sanitary and medical applications  metals: rotary and sheet metal parts from the subsidiaries in the Czech Republic and Slovakia can be ordered separately or combined in the main factory with plastic  Processing: Special Products of injection molded and extruded parts can also in conjunction with other materials, semi-finished ready to install for our Customers are assembled. Mechanical processing, joining techniques such as adhesive bonding, RF welding and thermal are possible.

Franz Elkuch AG Synthetics manufacturing plant (Switzerland) Injection moulding specialist since 1965 Machines with 25 - 500 tons clamping force (moulds up to 7 tons) Processing of all thermoplastics Moulded parts for plastic pipes, cable protection and sewage systems Technical parts 20 - 3000 gram Housings for medical equipment and apparatus ( boilers, gas heaters etc.) Associated toolmaking We plan, accompany and realise injection moulded products from the very beginning: from design, engineering, toolmaking to series production. As a third-generation family business, we are fully committed to the production of innovative injection moulded parts. We produce customised orders as well as our own product developments. Translated with www.DeepL.com/Translator (free version)

Providing a wide range of technologies in the thermoplastic injection molding industry. Wegaplast operates in the field of thermoplastic material injection processing and is one of the most qualified manufacturers of industrial components for third parties (B2B). In order to grant a complete and effective service, Wegaplast is your partner and system supplier in the development of the product, not only for the injection molding of plastic parts but also for:

Plastic injection mold

I am a mechanical engineer and live abroad. Here the service is very cheap for you. Just tell me your wishes and let me treat you cheap with perfect quality for you.

P / S KUNSTSTOFFWERKE AG is an innovative medium-sized company in the plastics processing Industry with an own tool. From over 1000 tools, we produce technical plastic parts from 0.1g to 2.0 kg on powerful Injection molding machines with a clamping force of 150 up to 5000 kN and presses with clamping forces from 600 to 3000kN. Product-specific handling systems and peripherals to ensure safe production process at a consistently high level of quality. From our many years of experience in the processing of thermosets and thermoplastics materials (unreinforced, reinforced, modified or high-tech plastics) can our customers always benefit. The diversity of our production program, below are some examples, requires a special expertise. Plastic parts with a highly polished, verspiegelbarer surface design as part or plastic-metal Compounds; System and component assembly; Pure assembly work; Printing, welding and two-component injection molding.

The Ponti Guarnizioni company, with its 40 years of experience, has achieved good skills in the process of transformation of elastomeric raw materials. It specializes in molding technical articles on customer's drawing, in various types of standard and special compound, also with restrictive regulations, using hydraulic injection and compression presses. The elastomeric materials are: ACM - AEM - AU / EU - CO / ECO - CR - EPDM - FKM - VMQ - FVMQ - HNBR - NBR - IIR - CSM - NR - SBR - FFKM. The management system conforms to the UNI EN ISO 9001: 2008 standard and from 2018 will be the certification of compliance with UNI EN ISO 9001: 2015 standard. The range of products is wide and includes: bushings, sealing rings, molded and / or cut washers, caps, solenoid valves, membranes, filter seals, coffee machine seals, binocular seals, rubber gaskets -metal, special o-rings for sizes, materials and tolerances. The sectors to which its products are intended are different, among the main ones: oleodynamic - pneumatic - electronic - optics - appliance - lighting - filtration - oenology - agricultural mechanization. The company interacts with qualified suppliers, specialized in the design and manufacture of molds, in supplying raw materials and in the finishing stages of the production cycle. It has competent staff, able to understand the needs of the customer, providing excellent consulting technical and commercial assistance. The Ponti Guarnizioni brand is present in several European and extra-European countries, with good competitiveness, thanks to a business policy tailored to meet the specific needs of the Customers, also accepting requests for small production lots, guaranteeing dimensional tolerance ranges and hardness of the materials more restrictive than the standards governed by the regulations in force in the rubber-plastic sector. For more information, please visit the website: www.pontiguarnizioni.com

We are an experience manufacture of plastic technical parts, packaging, tableware and specialized in meal service equipment for onboard services. In the past twenty years we have been producing these onboard service items for companies like Air France, LOT, KLM, TAP, Emirates, Qatar Airways, Oman Air, Saudia, LAN Chile, Virgin Atlantic and many others. In those years we have built up a lot of knowledge to meet your requirements in development, production, support, short lead times and logistics. With our molding systems we can be very flexible for bigger but also smaller quantities. Our relatively small organization and the modern machines makes us very competitive! I am sure that we can become a value partner to your company and would be honor to have the opportunity to better present ourselves.

Kaplast is a private company whose primary business is the production of plastic goods with the technology of injection moulding. We are the major supplier of crates for all major breweries in the former Yugoslavia, as well as for water companies. We also produce technical components for electrical, household, and car industry. We rely on a good relationship with our suppliers, with a goal to fulfill all the needs of our buyers. Kaplast has 35 years of experience in injection moulding, and is looking forward to continuing its technological and financial growth. The possibilities in our manufacturing plant are the following: - injection moulding - silk screen printing - recycling of HDPE and other polymer material - sale of recycled material - filling crates with needed bottles

Our advantages are more than thirty five years of experiences in the field of injection moulding, flexible production capacities and our completed approach to the realization of the project requirements, with emphasis on achieving your quality standards, price frames, deadlines and products properties. We offer Complete product solution which includes the entire development of the plastic product. You just present your idea or design and we carry out all the necessary project steps up to the series production. Our supplementary technologies are Ultrasonic Welding and Vacuum Metallization.

We are a medium sized company in the plastics processing. Our production portfolio mainly consists of injection molded components. We have 38 machines with up to 800 tons of clamping force in the 1K and 500 closing force in the 2K range. In addition, we work component development and Beuteiloptimierung as a service.

Injection molding of tools with large numbers of cavities Short cycles with high injection rates; Thin-wall parts; Grosserien with constant quality characteristics; High-end machines (Netstal) and periphery; thorough documentation; SAP Business Solution / Product - intranet, educated, skilled and motivated employees; Certified according to DIN / ISO 9001:2000; Machinery Netstal injection molding machines from 100 to 300 t Closing and shot weights of up to 800 g Toolmaking Rapid Tooling Laser sintering - or stereolithography patterns can be made within 48 hrs available, usually in the original material quality. Vakuumgießformen and prototype tools for small series are available within one week. Tool design Our construction partners is focused on multi-cavity molds and hot runner technology. The designers make plastic meet, the targets are short cycle times and stable production processes. All popular CAD - data can be processed, default SolidWorks. Mould Precision injection molds with high Kavitätszahlen, stack molds, hot runner molds, 2-K and elastomer forms, everything: SWISS PRECISION Assembly, decorating and joining technology Completion of the components on assembly machines Packaging and labeling Interim storage in the high-bay warehouse

Individual plastic products for industrial and advertising In 1975, Horst Braun founded the company Braun GmbH plastics. Thanks to the high quality standards as well as the personal and professional advice, the customer base grew rapidly over 200 to customers. Meanwhile, led by Katja Brown, daughter of the company founder Horst Braun, Braun GmbH employs eight staff in the areas of design, production and management. Our years of experience in the plastics processing makes us a competent partner in the planning and Implementation of your ideas in acrylic glass, polycarbonate, and many other materials.