In 1980 Hidrokar Press started the manufacturing of hydraulic press with customers expanding all over Turkey and a constantly evolving service network of dealers which reach overseas market the company is moving towards becoming a constantly developing brand day by day. The wide product range of our products is developing for our customers. Following the technology and innovations our enthusiasm is renewing every day our experienced production and our R & D team are constantly working to ensure the satisfaction of our customers. As Standard • Workshop presses • Rubber presses • Deep drawing presses • C type presses • Sheet forming presses • Broach keyseating presses • Car plate products • Scrap balling presses • Scrap cutting shears • Recycle equipment Special intent presses It continues to produce quality solutions for its target audience with the production of special-purpose hydraulic presses in many different constructions and sizes. The presses produced by the Hidrokar Press which is among the preferred companies in the sector with its successful works are used in automotive spare parts, agriculture, textile, food, energy, defense, construction, mining, metal, aviation, maritime and so on. It is used by various manufacturers in such industries. Located in Konya, central of Turkey, including service providers and manufacturers in many countries of the world Hidrokar Pres aims to become an international brand. Since the day of its establishment, the company has been working on the basis of customer satisfaction, quality and reliable service. In addition to the product sales, in case of any failure that may arise in the field of product warranty, technical service and spare parts the company takes care to maintain its relations with its customers after sales and offers alternative solutions to its target audience.

MKW was founded in 1960 and has been 100 percent family-owned ever since. MKW Holding GmbH unites the two divisions MKW Kunststofftechnik GmbH and MKW Oberflächen+Draht GmbH. The MKW Group employs around 500 people at five locations. In Weibern and Haag am Hausruck, components are manufactured for a wide range of industries in the core competencies of metal, plastic, powder coating and sanitary. MKW is the leading toilet seat manufacturer in Europe and one of the largest powder coating companies in Austria. The production site in Haag am Hausruck is the competence center for sheet metal processing and surface finishing. As a system provider in the field of aluminum and steel processing with subsequent powder coating, we supply everything from a single source, from the idea to the design to completion. Sheet metal processing On a production area of 3,300 m² we cut, bend, deburr, weld, drill, and grind sheet metal parts of all kinds according to your individual specifications. Our processing sizes in sheet metal processing Materials: sheet steel, aluminum & stainless steel Dimensions: up to 6,000 x 2,000 mm We process up to 2,000 tons of aluminium, steel and stainless steel every year. Powder Coating With state-of-the-art machinery and specifically applied coating technologies, we coat 3 million m² of metal surfaces per year. The quality of the powder coating, gloss level, and surface texture can be individually selected.

Our company was founded on 28.02.2005. It builds on the experiences that have been collected for years in the FIRE tool-und Maschinenbau GmbH in the field of stamping production. The acquisition of new hydraulic presses and the investment in a new Production facility enables us your client's wishes and not least Your product innovations enhanced implementation. We will advise you in the choice of materials and develop with you a tool concept. This can be thanks to the close cooperation with the FIRE tool and Maschinenbau GmbH are implemented quickly and effectively. Production of stamped parts Stampings band Stamping parts with thread Pressed, stamped and drawn parts connected tooling with 35 employees since 1992 CNC milling 3/5-Achs CAD CAM CNC turning CNC Wire EDM CNC sinker EDM List of machines We can customize your stampings on the following machines: Belt systems - 600mm width 8mm tape cross-section Eccentric EBU 1000 KN 80Hub/min Eccentric PME 2000 CN 80Hub/min Eccentric EBU 2000 CN 80Hub/min Eccentric PME 3150 CN 60Hub/min Insert presses: Eccentric Helmerding 850KN 60Hub/min Hydraulic press 250 kN 2x Hydraulic Press 400-630

WHO WE ARE We are a division of the internationally active Jordan Group with headquarters in Langenfeld (Rhld.) and further locations in Germany, Great Britain, Bosnia-Herzegovina and China. WHAT WE DO - rolling / bending - sheet metal rounding - punching / nibbling - laser cutting 2D in steel and aluminium WHAT WE OFFER - long-time experience in sectors with quality sensitive reguirements such e.g. medical technology, lighting and aerospace industry - know-how - most modern manufacturing technologies and facilities - an ISO-certified quality management system

"MES-SAC Family produce for you by using their experiences and technologies in the most efficient way" MES-SAC started its operations in 2014 with the decision of the founding partners to combine their 25 years of experience. 25 years of experience gained; Quality of semi-finished flat steels, pipes and profiles in National and International markets in the field of Defense Industry, Automotive Sub-Industry, Medical Industry, Electric-Electronic Industry, Telecommunication-Signaling Systems, Renewable Energy (GES-HES-RES) Systems with knowledge, experience and energy. It operates in the fields of procurement in accordance with the processes, designing, processing with the latest technology machines, machining, surface treatment and assembly with contracted external suppliers. Our company, which keeps customer satisfaction ahead of all facts, aims to produce high quality products, thinking that development and high quality are focused on education and human investment. It carries the mission of following the change, transformation and technology in the sector and improving the product quality. At the same time, with the understanding that it is a duty to leave a better world to future generations, we are committed to developing the principle of “environmentally friendly production”, keeping nature, human and environmental protection at the forefront in our production, to comply with the legal regulations by applying occupational health and safety rules in all our activities

Lithuanian company Jansvis JSC activities – manufacturing and designing of tanks, reservoirs and constructions of stainless steel and structural steel. Tanks / Silos / Reservoirs / Process tanks / Non standart tanks For food industry – dairies, flour mills, chocolate, food oil. For chemical industry – fertilizers, fuel. For agriculture – feed and grains storage. For alcohol industry – breweries, wine, vodka. Constructions / Containers / Pallets / Platforms / Racks / Gatings etc. www.jansvis.com

NURSAL Makina is a manufacturer & exporter company. We are specialized in sheet metal fabrication. Our core business is welding Our capabilities: - Laser cutting & bending - Press forming - MIG/MAG, TIG - Pipe, profile bending & cutting - Powder coating - Wet painting - Chrome plating, electro galvanizing, hot dip galvanizing - Machining & grinding We have a wide range of products including tanks, barriers, platforms, guards, conveyors, stairs, cabinets, frames, machinings etc. Our target sectors: Construction, Automotive, Hydraulics, Textile, Agriculture, Marine, Offshore For more information about our company you may take a look at our website www.nursalmakina.com/en/.

We are a medium-sized, future-oriented family business, which finds its origin in the locksmith Hugo Fürst. This was founded in 1976 and enlarged in 1989 with a cultivation. 1999 saw the founding of the company Fürst Laser- & Edelstahltechnik GmbH with the managing directors Hugo Fürst, Michael Fürst and Joachim Fürst. Since its founding in 1999, we have established ourselves on the market, with steady growth in the fields of modern metalworking, traditional metalworking, and art & design. By dividing our production sites, we are able to process steel and stainless steel spatially separated from each other. Steel can be processed in the locksmith's shop in the neighboring building, stainless steel at the headquarters. A dedicated team, a production area of 3.000m² and a modern machinery guarantee our customers the highest quality and the adherence to given delivery dates.

The company Dr. Oette machine components has successfully established itself in the last 15 years as a systems supplier in the metal and metal processing. Our strengths lie among others in the planning, production and assembly of machine covers, welded assemblies and metal components Our specialists and engineers provide our clients with prompt and quick delivery - just in time -. According to custom installation plan, specifications and special delivery arrangements modules can pre-picked, assembled and wired. The company Dr. Oette machine parts was founded in Markranstadt 1993. In 1999 came with the office Dr. Oette sheet metal processing of location Ehrenfriedersdorf it. Overall, the company has 81 employees. The company Dr. Oette machine components stands for expertise, quality products and knowledgeable customer support. Dr.Oette machine components developed in your order customized products of various sheet metal components in combination with components and controls for you, apart from the production and assembly of components, if necessary, the entire value of purchasing and logistics. Individual attention from the first drawing to production to final assembly of technically competent partners Pre-commissioning, pre-assembly and packaging of items (Operetta), system components and assemblies Coordination of supplies and installation on-site support Extended storage of prefabricated products (- just in time -) Development of specific solutions for specific requirements, individual attention from drawing to final assembly and acquisition of the entire value of purchasing and logistics. Professional Coating Solutions Ensuring processes from order confirmation to delivery including identification of the goods by our customer information system and qualified employees for quick and timely delivery to our customers. Production of parts made of sheet steel, stainless steel, aluminum and for special requirements are also made of brass, copper or high strength steels in small and medium series Development of customized products made of sheet metal components with modern construction systems Production of complex welded assemblies of sheet metal parts in combination with mechanical parts in high quality Advice on the design of sheet metal parts with the goal of cost-optimized production and substitution of expensive components mechanically produced by competent partners Ensuring compliance with quality requirements through a thorough quality assurance As part of a pattern request we can provide you the quality and efficiency of our company to the test. CNC - Sheet Metal Fabrication CNC lasers, CNC punching, CNC bending, CNC milling Schweißen-MAG/MIG/WIG Round rollers; Nassschleifentgraten Equipped with the latest technology from TRUMPF. Surface coating Wet paint Powder coating Screen printing Assembly of mini up to a platform size 2000x5000 mm Container packaging

LK Metall offers individual plant construction that protects the environment and resources. The products set new standards through cost-effectiveness and process engineering expertise. We supply and support customers across Europe from two German production sites. State-of-the-art production processes as well as the in-house process and process technology are a guarantee for successfully developed system solutions. LK Metall is certified according to DIN EN ISO 9001 and has more than 150 years of experience in metal processing. The greatest motivation for us is the satisfaction of our customers from different industries.

Ros company was founded in the early 80s, and since that time we have been supplier for sheet metal components. During the years we optimized and improved our production process, investing in machineries and tools of new generation to satisfy the most compex market's requirments. Thank to this, we are specialized in supply finished products, completed with surface treatments and assemblies. The production processes we do internally are: - laser cutting (max dimension 2000x4000mm and thickness up to 20mm) - bending (using robots that can move up to 200 kgs), panel bending and calendering - tig / mig and robot welding - powder coating - assembly of finished products, completed with mechanical, electronic,.. parts Our production floor is of 12.000 sqm and there is trained and qualified personnel working inside. Furthermore, the costant investments on tools and machinery, let us became qualified supplier for important European companies that work in different sectors (textile, naval, logistic, agricolture,...)

We are to take over production of small, large and mass production capable. We have various experience in the areas of: aviation, military, Cryogenics, power plant, vessels, heat exchangers, piping and plant construction.

We are a leading company in the field of high quality metal sheets, profiles and welding constructions and deliver to customers are mainly in the areas of special systems and Mechanical engineering, rail and transport equipment, clean room technology.

Mecom combines experience and innovation in sheet metal working. The past and the future of precision machining meet in a machine shop that has over thirty years of Padua experience and adopt the most modern and efficient technologies in laser cutting sheet metal, bending, turning, milling and welding.

Satisfied customers are the best proof of our successful work. We produce everything in-house. In this way we guarantee a quick project flow, even if it takes a little longer. Our range in metal construction is broad. We advise you individually, also on special requests and implement them efficiently and with experience for you. And everything that we cannot do, our qualified partners can!

Rampinelli has been working since 1913 in the Industrial sector with Clients from all over the world, specializing in the field of contract manufacturing, with one constant guiding mission – achieve our Clients maximum satisfaction. The main sectors we serve are: • Automotive Industry • Sheet Metal Forming Industry • Energy Industry • Iron and Steel Industries • Chemical and Pharmaceutical Industries • Construction Industry (drilling/piling rigs, earth moving machines) Rampinelli is specialized in the field of custom construction of mid and large size components that require high quality standards. The services we provide our Clients include: • Engineering & Consulting • Mid-large size Fabrication • Mechanical Machining • Construction of Machinery & Equipment • Revamping & Regeneration • Installation and Maintenance services • Special Projects Rampinelli is organized in the following internal divisions, working jointly to provide our Clients the best possible service: • Cutting/Preparation • Fabrication • Welding • Cladding • Mechanical Machining • Coating • Assembly • Maintenance Services

Numberger Technologies is a medium-sized family company that has more than 50 years of experience in all relevant industries and areas. A part of our core competence lies in the areas of sewage treatment plants, pipeline, plant and mechanical engineering. We have also continued to specialize in food technology components, special designs, conveyor technology, individual part production and prototype construction. We know the challenges our customers face and work together to find the best possible solution. Our quality standards, our experienced and service-conscious specialist staff as well as the modern production facility are the guarantee for our delivery reliability and precision. Personal support, tailor-made solutions and first-class service tailored entirely to your individual needs - that is NUMBERGER Technologies. Our motto is: "A company can only survive if its learning pace is greater than the rate of change in its environment. "

KWM WEISSHAAR Sheet metal process chain As a leading, modern and innovative companies in the metal and sheet metal processing, we are a team of over 500 employees in more than 30 years, a respected partner of many well-known customers. We supply almost all significant industries, such as the printing press, the automobile industry, the rail vehicle or general engineering. With our five fields of engineering, sheet metal processing, joining and welding, assembly and logistics, we are across the entire process chain of sheet metal processing across the all-rounder and problem solvers when it comes to sheet metal. Engineering The Engineering Division is divided into the areas of order processing center, design, prototyping (experimental / prototype) as well as tool and fixture. Sheet metal processing KWM WEISSHAAR disclosed as part of the machinery, the entire bandwidth, which requires a modern sheet metal work systematically from. Add & Welding Laser welding Robot welding / linear welding Bolzen-/Punktschweißen Manual welding Stick Rivet Assembly Refrigeration and air conditioning equipment installation Major Appliances Installation Electrical installation Surface Technology Others Logistics The objective of the logistics area is an optimum supply of production and our customers. Business With our five divisions, we are across the entire process chain of sheet metal processing across the all-rounder and problem solvers when it comes to sheet metal. This alignment is one of the reasons for its continued growth. In addition, a consistent customer focus and courage, very early to decide on the use of new technologies. This is always the customer benefits, which is expressed by time, quality and cost benefits. A recipe for success of the company is certainly also the successful approach to every customer by a project manager.The customer has the motto "One face to the customer" always the same contact person. Founded in 1979, today has over 500 employees of the largest suppliers in the field of sheet metal forming and processing. KWM WEISSHAAR produced with advanced machinery and equipment as well as a professionally well qualified and motivated staff. The product range of the business unit "sheet metal processing" includes high-quality products for almost all industries. The business was founded in 1997 "Design & Development" also offers advice and support of the idea through the design, construction, tool development and prototyping to series production. Sheet metal working "under one roof" is our understanding of professional service and partnership. What we stand for \ We offer our customers the best possible solutions in terms of production processes and methods. \ We cater to the individual needs of our customers. Thanks to the proactive thinking and action, we are helping to improve products and reduce costs. \ We offer our customers as partners in a relationship products and services at competitive prices. With our know-how and flexibility, we will fully meet the high quality requirements of our customers. \ Through our ideas for the realization of tasks, hard and effective work as well as high reliability, we win the trust of our customers.

Metal processing As milling CNC CNC lasercutting CNC Laserwelding CNC bending