Specialist for precision small parts in zinc, magnesium and aluminum die-cast With 3,000 employees and 20 factories in 16 countries, Dynacast Group ranks among the leading manufacturers of die cast parts. An important success factor for the rapid development of the company is the so-called 4-slider technology that enables the production of very small parts with a weight of about 0.01 g with high precision and repeatability. With high-performance machines and innovative tool technology developed in Dynacast produces extremely complex die castings weighing up to 1,000 grams for clients in diverse industries around the world. Top.

Are the pronounced dynamics and flexibility of a medium-sized structure in combination with the advantages of an internationally established production CF Maier the opportunity to develop highly sophisticated products of consistently high quality and inexpensive to manufacture. CF Maier light casting GmbH & Co KG The plant produces aluminum castings high levels in medium batch sizes than sand casting, gravity die and low pressure die castings-. Main customer base is the drive technology. Light metal flared flanges for water, waste water management and the paper industry as a round-house products off the program. The light cast is zertzifiziert according to DIN EN ISO 9001.2 and VDA 6

Welcome at the iron foundry Theodor Schultz GmbH & Co. We are a foundry, which has particularly specialized in the production of single pieces, small and medium series. Through our existing production facilities, we are able to manufacture batch sizes from 10 units in the machine molding.

Sternberg hardware is specialized for decades in the production of aluminum castings. In each case we use the optimum alloy in cabin quality. To our range includes: * Fittings for buses and trains * Karrosseri * Plastic coatings * Custom * Die casting, gravity die casting and sand casting * Parts of 10 g to 10 kg What our customers appreciate ... Experience Our experience in the field of aluminum casting will benefit our customers not only in large-and small series. Even complicated parts put us in the past are not unsolvable problems. Quality The quality of our products is appreciated by many renowned manufacturers of vehicle construction. You deserve our special attention, which is why we have been certified since 1994 according to the ISO 9002 standard. Reliability Time delivery and fast delivery - once it "burns" for our customers - have led to partnerships that exist in some cases for decades. Responsiveness Since we each work step in-house to perform on most of our products, we are flexible and have short lead times.

Our company was founded in 1956 by Helmut branch. We currently employ 12 staff. The production program includes unique pieces, and small and medium-sized series from 0 to 250 kg cast aluminum. Our products are characterized by a very good surface quality and dimensional accuracy. The satisfaction of our customers in terms of quality and delivery reliability is our ultimate goal. At our facility we provide castings forth a particularly good surface and excellent dimensional stability.

Main activities and products: Waeles Nederland BV is a QS9000 certified iron foundry, specialised in nodular cast iron products. This certification signifies that we comply with one of the most significant standards laid down by the automotive industry. Waeles offers a wide range of parts for various industries, including automotive, agriculture and mechanical engineering. When it comes to quantities as well as design, we are able to meet all your specific requirements. Net weight of our products ranges from 0.5 to 7 kgs. Production process and technology: In order to melt nodular cast iron Waeles operates 4 induction furnaces, each having a capacity of approx. 3.5 tonnes. The core of our production is the DISA-Matic MK4 casting machine. This is a fully-automatic vertical casting machine that meets the requirements of high casting speed and great accuracy, thus enabling us to meet the customers requirements. Series from a few thousand units up to an annual volume of approx. 400,000 are possible either in form of raw castings or as completely finished products. After casting the products are cooled down in the AMC cooling section, a process that takes an average of 30 minutes. Next the castings arrive in a (cooling) drum which separates the moulding sand from the product.

ince more than 40 years your competent partner for light and heavy metal castings in sand and permanent mold.

Develop since 1921, we produce and distribute at the site Holy House under the brand name DENI locks and fittings for gates, doors and windows, individual lock solutions as well as stamped and cast parts in contract manufacturing of Trade and Industry. A motivated workforce, modern machinery and a flexible ERP - system guarantee optimum quality at fair prices. Of course, our quality system is in accordance with DIN EN ISO 9001:2008 certified.

The company ZAL Zlievaren Al GmbH was founded on 03.11.1993 and registered on 28.01.1994 in the commercial register. The casting of Al alloys is in the premises of the company since 1963 tradition. The company is mainly oriented to foreign business customers whose production volume is between 60-70% a year.

At a glance Manufacturing technology Form of castings made of cast iron with nodular graphite, vermicular and flake graphite, SiMo-alloy cast iron and austenitic grades of cast iron Complexes, core-intensive castings primarily for the automotive industry Production Program - Exhaust manifold, turbocharger housing, supporting brackets, spring support - Series from 10,000 units / year with a unit weight of 2-10 kg Key economic data - Turnover: € 70 million - Shipping quantity: about 16,500 t - Employees: 290

We specialized in aluminum Kippgießteile their specialized piece weights in the range of approximately 10 g are up to 100 kg. The large volume Kippgießteile with dimensions up to 1.5 m in length are manufactured in Germany. The wage-intensive products are manufactured at competitive prices in our new plant in Hungary. A variety of products we supply finished in all common remelting and hut alloys. For years we have been supplying reputable clients in the areas of the vehicle, drive line, machine and plant construction. Likewise, we manufacture manufacturer of electric motors, awnings, exterior lighting and industrial scales. This is mostly to various gear housing or drive housing and motor flanges, cover and cylinder with high technical requirements. The unit weights of these products are in the range of about 1 to 100 empty kg, we have specialized in large-volume Kippgießteile. A variety of products we supply finished in all common remelting and metallurgical alloys.Cast parts are eg. Base frame, housing, brackets, base, magnetic enclosure, equipment rack. Our special services: 1 Construction services as early coordination with our partners to achieve a technically and economically favorable solution for the casting and the casting die. 2 Foundry Technical consulting for the development of new castings on initial samples to mass production. Advising on necessary technical changes to the article. 3 Electronic monitoring and control of casting machines to ensure that our clients want quality. 4 Delivery of castings and heat treated if necessary and machined Aluminum alloys The melt is continuously monitored with existing spectrum analyzer (Spectrometer). Molded be the most common alloys, both in remelting and in cabin quality. The following alloys are in use in our: Alloy designation to DIN EN 1706 numerically chemical symbols EN AC-21100 - EN AC-Al Cu4Ti EN AC-42100 - EN AC-Al Si7Mg0, 3 EN AC-43300 - EN AC-Al Si9Mg EN AC-44000 - EN AC-Al Si11 EN AC-44200 - EN AC-Al Si12 EN AC-46200 - EN AC-AlSi8Cu3 EN AC-47000 - EN AC-Al Si12 (Cu)

Luitpoldhütte AG is a worldwide foundry that manufactures high-quality castings products. We supply castings for agricultural engineering, the truck and off-highway industry and the refrigeration plant. We see ourselves as an extended workbench for our customers and are known for superior quality and comprehensive service!

• Pump Manufacturer • Transmission and valves manufacturer • Metrology • Medical equipment • Injection Molding • Special machine • Sawing Technology

Strong all-around - SLM 360º We develop and manufacture complex aluminium die-cast solutions for the automobile industry and its system suppliers. As a Group, our strengths lie in the development of tools, products and processes as well as in our high level of flexibility and ability to take action quickly to implement solutions for our customers. We want to expand our business activities to increase flexibility, transformation time and cost-effectiveness in the provision of light metal components for our customers. Therefore, we are expanding our capacity for order-related assembling. From company to group The original and main activity of the owner-run Group is the manufacturing of aluminium die-cast products for the automotive and component supply industry. Created in 1989, the aluminium die-casting foundry originally made unfinished parts for the European automotive industry. Today as a Group, we are a competent partner to our worldwide customers for the entire process, from product development to the delivery of complex, ready-to-install light metal components. The right approach Our aim is to obtain full customer satisfaction and to build a business relationship designed to develop into a long-term partnership. It therefore goes without saying that we deliver products of the desired quality, in the agreed amount and at the required date. Our references are proof of the level of confidence we have established over the past years with our customers. The principle of error prevention always comes first in regards to quality measures and our quality objective is “zero defects”. Our numerous certifications are proof of our commitment.

Year of establishment: 1954 Delivery: 129 425 t Sales: EUR 289 million Export: 86% Sales / Employees: 293,000 EUR Owner: ELES 80% (ELES is the Slovenian state-owned electricity producer) Employees: 988

As a powerful manufacturer of steel precision casting according to the lost wax we are successful on the market for over 50 years. With our motivated team, we have expertise and technical know-how. Our company's success is based on close cooperation and partnership with our customers and suppliers. With our 75 employees, quality, flexibility and punctuality can well agree. We manufacture unit weights of about 10 g to 70 kg. In addition to the customary use, remuneration and tool steels our strength is the shedding of rust-resistant qualities. We manufacture from prototypes to series part of all batches. Our customers include well-known companies at home and abroad, the highest standards of quality and delivery times set.

Founded in 1989 thanks to the brothers Luigino and Sante Cippitelli, Italmetal specializes at first only in the production of buckles and metal accessories for leather goods, quickly establishing itself as an important supplier for several national and international companies. Parallel to the production of accessories for leather goods, the company gives life to a technical department of design and development CAD-CAM for prototypes and moulds in steel, reaching important positions also in the production of technical details in zamak, in particular for the industry of furniture, automation and accessories. Currently the company, spread over a covered area of 5,000 square meters and with a workforce of 40 employees, is able to provide a complete service that goes from the study of the product up to the production of the same, passing through all the phases of the process work, which are carried out almost completely within the company itself. The types of processes that Italmetal can offer are almost exclusively addressed to the injection moulding sector. The two main production sectors are: Design and production of injection moulds for zamak and plastic materials. In the various phases that constitute the birth of an egg produced, the realization of the mould represents a crucial moment that will influence all the subsequent production phases of the product. The Molds department designs and manufactures moulds both for third parties and for internal needs. The department consists of a technical office that analyzes and studies the equipment commissioned to verify the times and technical specifications, and a modern workshop that follows all the construction phases. Together with the Stamping department, it carries out the testing of the equipment made up to the final set-up. Zamak moulding. The Stamping department, in addition to testing the equipment produced by the moulds department, takes care of the moulding and all the subsequent processing steps to which the parts are submitted before delivery. The technologies used in the department are two, by die-casting and by centrifugal moulding. Die-casting is used for the production of parts with high runs and for the production of technical parts with reduced dimensional tolerances, the centrifugal moulding is used for the realization of medium / small series and "pilot" parts. In almost 30 years of activity in the field of accessories production, the company has gained experience and expertise in the matter to be able, for each new project, to define with accuracy and safety the problems that may occur in the various production processes and consequently, advise the customer on the most suitable solutions to simplify or prevent these problems. Our strong point is this, a deep knowledge of the problems related to the development of new products, supported by years of experience and the use of the latest technology, which allow us to solve technical problems before the launch of the order and update our customers in real time already in the pre-industrialization phase of the product.

GÜRGENLİ Mühendislik Ltd started its activities in Bursa in 2000 in order to serve in the heavy industry sector. It aims to produce quality with the knowledge of the trained personnel with many years of experience in the sector. We are a company that has adopted the principle of working without compromising customer-oriented social responsibility and ethical values within the sectors we operate. GÜRGENLİ Engineering Ltd carries out design, manufacturing and assembly projects with its skilled engineer staff in the heavy industry sector.

SA.BI Foundry, founded in 1968, has undergone various phases of development throughout the years and has become a leading company in the field of the production of grey and spheroidal cast-iron castings also with additional machining. The current production capacity is 30,000 tons of ductile and grey melted cast iron. The flexibility of its production and logistic structure allows SA.BI to be competitive in the production of cast-iron castings of a weight between 4 and 700 kg in medium and large series. The company, certified ISO 9001:2008, has a quality control system in each production cycle, starting with the selection of incoming materials and going through up to the despatch of the machined castings.