Metalltecxhnik Hesse was founded in 2018 by Mr. Thomas Heinemann-Hesse. Mr. Heinemann-Hesse is a trained tool mechanic specializing in stamping and forming technology and has been working in this field since 1993 and also in special machine construction as well as in production for general mascine construction. We can manufacture drawing parts according to your specifications or build entire punching and forming tools or carry out repairs. We also manufacture spare parts and prototypes. Almost everything is feasible from a quantity of one. Of course there are things that we cannot do ourselves. A very good network with competent partners is available for this with advice and action. We can therefore also act as problem solvers in an advisory capacity.

Metal fabrication company based in Bucharest, Romania with 30 years of experience in this field. With Lloyd's Register quality assurance system and multiple CMM's and length machine, the main purpose of our work is client satisfaction. Try us or, if opportunity comes along, visit us! Regards

Donlouco is a supplier and manufacturer of customer specific components with extensive experience in the power distribution, hydraulics & electromechanical component field. Headquarters are based in Ireland with customer services, engineering support, scheduling and manufacturing in the Far East. Donlouco has extensive experience in dealing with customer requirements from a quality, engineering standards point of view with a unique ability to be able to communicate these requirements directly to highly trained Donlouco staff in China. Covering all areas of manufacturing, quality control and full logistics control to deliver components exactly to customer expectations time after time and over the longer term.

Welcome to KOCHs Tooling Family-owned company and system partner System partner with full service, more than 50 years of experience and state-of-the-art machinery, tool and special machine construction, series production and tryout — KOCHs Tooling offers a complete range of certified quality services. With the consistent CAD and CAM structure, from 3D design and work preparation to production and assembly, we guarantee maximum efficiency, even for small quantities. We develop, design and produce flexibly and cost-effectively — from individual parts and assemblies to devices and special machines in steel and non-ferrous metals. As a family business, we have continuously developed on the basis of our experience. In this way, we combine continuous innovation with a long-standing tradition, which is expressed in our value orientation. Personal proximity to our customers and partners is just as important to us as responsibility for our employees and the Wuppertal location, where we are now in the 3rd generation of work.

CRT Göring GmbH is a medium-sized company with 15 employees. We are a contract service provider in the area of eroding and machining, with a modern machine park that includes CNC wire EDM machines, sinking EDM machines, milling and lathes. Our focus is on the production of complex precision components, tools and individual assemblies according to customer requirements. The scale ranges from single-part production to small and medium-sized series. We offer all in one solutions for projects and that is “Made in Germany”. Starting with planning, construction, material procurement, CNC processing, various hardening and coating processes, to manual reworking, measurement, logging and laser marking of the components. We have many years of experience in the processing/processing of hard metals, stainless steels, titanium and aluminum.

h2> Success- now and in the future /h2> Through continuous development over the past 75 years, Charles Scharrenbroich GmbH & Co. KG has grown into a high-tech oriented company. Since then, this name stands for the production of high-precision and precision cut parts and components for axles, steering, transmission and aggregates of various kinds of high quality. Our customers include well-known European manufacturer and supplier of automobiles, vehicles, transmissions and engines.

The Amberger tooling GmbH is a family run business with a nearly 40-year tradition. Since 1971 the Amberger tooling GmbH is your competent partner when it comes to the development and manufacture of tools for sheet metal forming. Initially focused on the design and manufacturing of tools, has been expanded with the establishment of the Department of stamping technology in 1989, the process chain to the color matching in-house and series production. Today, more than 120 employees produce at the company headquarters in Sulzbach-Rosenberg in two plants to more than 7,000 m2 tools and stamped components for the medical, electrical and household appliances and the automotive industry

The company Mühlhoff & Schulze is a powerful, highly flexible company when it comes to solve your problems in metal forming. With our years of experience and expertise, we are gladly advise you.

MVM Industries is a brand name created to identify a group of companies focalized on the industrial specialization of cold forming metals. It has its origins in the foundation of the head company MVM Srl in 1969, which has been controlled 100% by the family holding company since, and is completed by Realmec Srl and IMG Srl today. The group’s activities have been centralized in the head company since 1998 and are subdivided organizationally through the creation of specialized subsidiaries and the acquisition of other companies that complement the holding company’s portfolio in its capability to respond to market demand in terms of quality, volume and services. MVM Industries positions itself on the market as a highly specialized operator that can support its customer, not only purely in terms of production, but also in co-design, product development, form design and production, logistics and post-production services. MVM Industries internationalized its productive plant in 2005 by constructing the Chisinau plant in the Republic of Moldova, where Italian organizational ability and competence are successfully merged with the productive energy of the emergent Eastern European countries in terms of cost/product. A high level of specialization and an elevated flexibility in process and product sustained by know-how and unique competence in the sector, position MVM Industries in a pivotal position for today’s international market, guaranteeing an unusually valuable customer-oriented service as well as high-quality performance. More than 100 employees, 15,000 m2 of manufacturing plant, loyal international customers of indisputable prestige such as Fiat Auto; Philips; Indesit; Ariston; Denso; Caufetaux & Maury; Benelli Armi and others, and a turnover of 19 million euros for 2006, these are the parameters for assessing the real value of MVM Industries’ achievement and growth.

On 01 May 1980, the company Peter Wennrich was founded in boiler village. The operation of the Department of metalworking, tooling and machining has been operational since 01.11.2009: second generation. In this context, a limited liability company was established, while the original single company of Peter Wennrich is still existent. You can learn in a detailed company history More about our family. Our extensive range of services includes metalworking, CAD design work, tooling and much more. Customized to your job specification, we use several methods of metalworking a: - Machining, - Bending, - Welding - Or eroding. Our trained staff - cutting and industrial mechanics, welders and tool makers - manufacture and construct high-quality components, construction equipment, spare parts or devices. Not only in the Dresden area, also throughout Germany, Austria and Italy, the siblings Wennrich GmbH can offer all our customers for custom tailored products.

Besides the construction of test and production equipment, the company Sigel plant GmbH also offers pure mechanical services. In our modern production machines, we produce only prototypes but also small series up to a lot size of 500 pieces.

We are specialized for the tool construction of depth tools within the range packaging machines. In addition count beside format tools also stamping machines, perforations and feeding of tablets. By the CNC Fertigungskapazität we manufacture in the meantime also milled pieces. The materials which can be worked on are aluminum, steel, V2A, as well as thermal and thermosetting polymers. The lot sizes are enough from 1 to 5000 pieces or more highly.

The FLAMMMOTEC GmbH & Co. KG was founded (formerly STAN DRAWING, since 1954) 1993. We manufacture in the works of Berlin and Nauen stamped and drawn parts, primarily for the automotive, white goods and electronics industries, primarily in the United series. Other strengths lie in the field of manufacturing of components. We specialize in die-castings of medium size to large stampings (pressing force of up to 16,000 kN). Our stamping presses and transfer presses have table sizes up to 5200 x 2300 mm. The manufactured parts have up to 13 kg in weight and up to 1 m². In addition, welded assemblies are produced on a modern 6-axis welding robots (1 m³ action space, part weight up to 1000 kg) and spot welding machines. Production Our parts range covers all types of forged parts in all grades of material from small parts up to parts of approximately 1 m². For years we have specialized in the field of deformation of aluminum and stainless steel sheets (also in sandwich construction). In our pressing plant single, progressive or transfer dies are used up to a weight of 25 t. There are automatic punching machine with a printing speed 1000-16000 kN and a table size of up to 5200 x 2300 mm. There are additional single presses with a pressure capacity up to 6300 kN in use. For the production of sandwich parts (especially shielding plates made of stainless steel) is a 8000-kN large-scale press. On our punching machines are used to coil up to a width of 1200 mm and a plate thickness up to 5 mm, depending on the section that process. We are predestined for assemblies, ie. For the implementation of welded structures with six-axis welding robots and automatic joining of nuts and bolts In order to achieve an optimization of the work, we have assembly, placement and spot welding machines in use. By working closely with our partners, we are able to also surface coatings and galvanizing on grafts from powder coatings to cathodic dip coating offer. Logistics As a supplier with world-resident customers, we measure the Logistics Management utmost importance. As requested, we deliver just in time and place value on adherence to your requirements in terms of delivery quantity and packaging. Here we support a modern, always with the latest requirements customized IT technology. Our logistics department handles your incoming EDI, Internet or fax calls immediately and ensures that production, storage and shipping can implement your requirements promptly and respond to your needs. We work together on request as specified by you or by us carriers commissioned reliable partners and respond quickly and flexibly when difficulties arise. Toolmaking Our tool guarantees us a high degree of flexibility for changes and remakes of assemblies to customer specifications. It is an important partner of our pressing plant because downtime is minimized through him. Through close contact with our production, the tools are optimized in the short term. Preventive servicing and maintenance are an important prerequisite for safe production. 20 toolmaker / maintenance have three layers in use.

We are continuing a long tradition in the development and manufacture of tools in Gornja Radgona. Initially focused on the design and manufacture of tools for sheet metal forming, has been expanded over the years, the process chain with series production. Today, more than 75 employees produce tools and production parts for the automotive industry. Over 95% of sales are realized with companies in the European automotive industry. Our products are installed in the cars from leading manufacturers, such as Audi, BMW, Mercedes-Benz, Volvo, Ford, Volkswagen. The quality in the development, production and sale of dies and standard parts, is secured in accordance with the standards ISO / TS 16949 and ISO 9001. Our employees, our know-how and our long experience, are always at your disposal. It would be very pleased if you would turn in your projects to us.

The company was founded under the name SchwarzTEC SHS (blacksmith trade Black) in December 2009 and led to June 2011 as a pure online trading for wrought products. In June 2011, the Assembly service S + F that was added to and carried out installation work of all kinds. In January 2013, the company was renamed SchwarzTec and took over the company Elektro Radio honey in Titisee-Neustadt am 01.02.2013 and integrated into the company SchwarzTEC. The main tasks of the company are SchwarzTEC. Electrical installations, control panel, customer service, repairs and installation work of all kinds, and metal works, and trade in electrical and metal goods. Our focus is at the moment in electrical engineering, but are currently under construction of the metal area and looking for jobs in the field of steel construction / engineering, whether welding, bending, drilling, punching, shearing, sawing and assembling, we are equipped and able to produce a wide variety of components . We would be pleased as you can to help the supplier on. Your company SchwarzTEC

Attrezzeria Trentina operates in both the national and international market as a partner specialised in the planning and construction of the following items: - Tools for cold machining of sheet metal, such as multi-stage, forming, drawing, progressive and transfer moulds - Setups and special clamping jigs for automatic machining in the work centres, equipment in general. We also produce special-purpose machinery and automatic systems for industrial production. Our mission is to design, plan and produce top-quality custom engineered equipment to suit the needs of our customers so as to cut down their production times and costs; we can therefore play a useful part in making your production processes more efficient. We want to place all our knowledge and experience at the disposal of our customers, advising them and proposing solutions for increasing productivity while keeping the costs of industrialization and production low.

SDL Engineering is a young company with high demands on itself and its products. Our core competencies lie in progressive tools, manual tools, gauges and prototypes. As a supplier for the automotive industry, we are familiar with high requirements of this industry and have appropriate quality level designed to. Our customers appreciate us for the following reasons: - The feasibility is always fully verified and confirmed. - The tool costs are exactly calculated and broken. - The methods are always created in the initial phase and provided. - The delivery time for first off-tool parts is 10-12 weeks. The tool takes about 12-14 weeks. - In the first tool fitting for the customer, the project manager is always present. - All construction documents are always acc. ISO / VDA created and placed in project completion are available. - By low wages in Lithuania and wide network of suppliers, we are a good alternative for suppliers from Eastern European countries or Asia. Let yourself be inspired by our expertise and price - take a contact.

We are a family company from a small village Prekopa in Vransko community. We have been active on the market since 1993 and we have been trying to adjust to the market and clients’ wishes since then. S&A Company was established with the purpose to produce all kinds of tools but we also offer other services such as production of all kinds of roughing jaws and mechanical parts in metal industry. We are active on the domestic and foreign market. We mainly export to Austrian market where we have been successfully doing business with bigger Austrian companies that value our quality and affordability for 15 years. Our company has been technologically modernised recently, and in this way it is also capable of producing even the most demanding projects in the field of machinery industry.

Our versatile production program includes high-precision deep-drawn parts as well as stamped and bent parts - also in high-quality decorative areas - for various industries. The Sixt company can look back on over 65 years of experience in metal forming and tool making - since 1999 also at another location in the Czech Republic. Our in-house tool shop is equipped with all machines for the production of punching and forming tools. Our delivery program is completed by assembly to assemblies, vibratory grinding and parts cleaning. In cooperation with reliable, long-standing partners, we can also offer an extensive portfolio of surface treatments. We have presses up to 1,000 t pressing force with which we process all material grades up to 6 mm thick. www.sixt-gmbh.de