Our customers are offered everything they need within our group of companies, all in one basket: from development and project management via the production of tools for plastic and metal fabrication, through to manufacturing the parts. In this way we closely co-operate with our customers in developing functional structural plastic and metal components on the basis of the design, thereby achieving an optimum combination between plan, design, manufacture, and cost structure. The integrated possibilities have enabled us substantially to shorten the project run up to the point of series production. The systems Pro-engineer and Catia, available to our staff, permit the creation of structural components and tools, "in one casting" as it were. Injection Moulds Our staff in the individual manufacturing areas have state-of-the-art technologies and most up-to-date machines (such as 12-wire and 15-wire cavity sinking EDM machines) at their disposal. In producing moulds with a guaranteed number of shots, especially for the automobile industry and consumer electronics, our dictum is precision and quality. This holds true for injection moulds, diecasting, duroplastic, two-component, rotating, transfer and insert/outsert moulds, just as much as it does for two-colour moulds, combinations of hard and soft plastics, automatic wire leads, in-mould decoration, and precision gear wheels. Rapid tooling with the aid of our EOS metal sintering machine M250 Extended makes it possible to produce mould inserts for injection moulds and prototype tools within a very short time. Eighty moulding machines in Vienna and Hungary, with a clamping force of between 25 and 1,100 tons, offer all the possibilities of manufacturing moulded, thermosetting and duroplast, gas-injection moulded, two-component moulded, insert and outsert moulded, as well as in-mould decoration parts. Our machines are equipped with automatic robot systems, and automatic packaging lines complement the production line. Vienna: 3-shift operation / technical products and precision parts with a mould clamping force of up to 500 tons, Hungary: 4-shift operation / technical products and design parts with a mould clamping force of up to 1,100 tons. Your plastic parts are coated in three fully automated painting lines on a water-soluble basis (single-component or two-component coating). Your metal parts are electrostatically painted, from the smallest parts up to housing coatings for consumer electronics.

Tecnoplast deals with the injection molding of technical and mechanical components with the use of thermoplastic technopolymers, as well as the design and construction of molds. We offer expertise in the use of high-performance thermoplastic polymers thanks to our expertise how of more than 60 years of experience in the molding sector and in the compounding of special materials. We have a strong experience in the “Metal replacement” of aluminum, brass with effective reduction of weight, costs and performance maintenance even on structural parts. We stand out in the molding of mechanical parts with very large thicknesses and parts related to movement and mechanical resistance (transmission parts, motor components, pinions, pulleys, gears...). We have: • Electric presses for high precision molding and high cycle repeatability. • Internal Test and Quality Laboratory (Keyence equipped) • Technical Office • Internal tooling for molds and their maintenance • Research and Development Office • Software for the simulation of molding flows (CAE type Moldflow). • Possibility of manual and automated assembly. • Post-mechanical recovery in the workshop.

MECAVG is a precision machining company specializing in milling and turning services for the production of high-quality mechanical components. We focus on prototype development, small and medium production runs, and custom tooling solutions. Our team is composed of experienced professionals, with expertise in delivering high-precision parts for industries such as automotive, aerospace, and industrial manufacturing. We pride ourselves on delivering reliable, precise, and tailor-made solutions to meet the specific needs of our clients. At MECAVG, customer satisfaction and innovation are at the core of our operations. Contact us to learn how we can support your projects with precision machining excellence.

We produce precision mechanical components and assemblies in small to medium batch sizes. Next is a cleanroom class ISO 5 available. CNC turned parts CNC precision parts CNC milled parts Lohndrehereie Lohnfräsereie Precision Turned Parts Precision milled parts Electropolishing Laser marking

From initial samples to series production, from special products to mass production. Always in accordance with the highest quality standards. Benefit from our know-how in manufacturing products for the pharmaceutical and semiconductor industries. We will solve all your requirements. Thanks to our regional and international network of suppliers and sub-suppliers, we are also able to expand our own competencies in a targeted manner.

Welcome to asm! As a certified specialist company, we provide you with precision turned, milled and eroded parts with over 20 years of experience. We specialize in the CNC processing of complex high-tech components and rely on high-quality materials and the best quality of implementation. Our qualified employees support you with your project and work closely with you so that we can perfectly implement your individual ideas and requirements. With ultra-modern machines combined with our many years of experience, we focus on effectiveness and flexibility. Thanks to our 100% control and an “all-in-one service”, we offer the highest quality and safety in the long term and take full responsibility for the implementation of your project. Our products are guaranteed to be free from steel contamination! We rely on a high level of vertical integration and good cooperation partners in order to be able to offer you a wide range of services. With us, you not only receive high-quality CNC processing, but also active support with your project. Get in touch with us now and see for yourself.

Mimest was founded in 2005, as a start-up founded by 4 engineers. Its essence as an innovative and high-tech company soon led it to become the reference point in Italy for the MIM (Metal Injection Molding) technology, exploiting all the possibilities of applications in the manufacturing industry and, more recently, a pioneer in additive manufacturing. Mimest is today a reference company for MIM as well as a pioneer of additive manufacturing through binder Jetting. The Metal Injection Molding process was born from the meeting of the injection molding technology of thermoplastic polymeric materials and the sintering of metal powders with the aim of producing articles with complex shapes in high-performance materials otherwise difficult to work. Similarly, the "Binder Jetting" technology applies the same principle combined with the flexibility of 3D printing. The fields of application of the MIM process are many and all characterized by a high rate of innovation: medical, fashion-luxury, watchmaking, defense, aeronautics, motorsports – just to name a few. Mimest has developed strong collaborative relationships with companies in all these industries and developed specific knowledge on the materials that each customer needs, from the titanium necessary for medical applications to the stainless steels necessary for the luxury sector

We offer innovative solutions made of plastic and metal, from the precise manufacture of individual components to complex assemblies – everything from a single source, from development to series production. Our range of services includes injection moulding, machining, sheet metal working and welding technology, as well as the manufacture of tools and components. It extends from toolmaking and high-quality components to customised special vehicle construction and certified special protection systems that protect people worldwide. Customers from industry, medical technology, mechanical engineering, agricultural technology, the off-highway industry, railway technology, defence and many other sectors – including the automotive sector – rely on our experience and quality. With around 1,000 employees at seven locations in Europe and a modern machine park, we are ideally equipped for every task – and are sure to provide you with the right solution.

Prototyping with FDM up to functional series parts manufactured with SLS or SLA. Today, 3D printing has become an integral part of numerous industries, such as aerospace, automotive engineering, consumer goods, medicine, and education. The wide range of 3D printing applications is redefining the limits of manufacturing.

A certified industrial group with full in-house capabilities, including engineering and component design, pattern manufacturing, grey and ductile iron casting, and precision CNC machining. We deliver high-accuracy, production-ready components for demanding applications.

We produce stampings, precision springs, and wire forms for the automotive, electronics, computer hardware and lighting industries, among other sectors. Virtually every material is processed by our modern, highly flexible CNC automated machines, allowing quick machine set-ups. Our in-house hardening oven, grinding shop, and assembly equipment further facilitate the timely processing of semi-finished parts according to our customers demands. Perfect surface treatment of our products is guaranteed by plating firms close to our operations. These factors make a quick reaction to customer demands and short lead times possible.

www.hallerkt.de

The "Hennig GmbH, steel and metal products" in Pfullendorf, Baden (20 km north of Lake Constance), is a technically modern equipped, qualified family-owned business in the industry. The company specializes in the "cutting and assembly of series, single parts and assemblies", and is a reliable partner for a number of nationally known companies and corporations. Mostly wrought and saw blank, Hennig manufactures components, which are used, among other things in the clamping means and commercial vehicles, as well as in textile machine or pump, engine and transmission technology.On a variety of visual and functional parts, this complex milling, drilling, turning and grinding processes with modern tools and machines are used. Reaches Process capability and ensures Hennig by a quality management system certified according to DIN ISO 9001:2000. Production methods: Flexibility through the manufacturing process in house as: Turning point turning, CNC turning, milling, 5-axis machining, drilling, Surface grinding, CNC grinding, cylindrical grinding, 3D Measurement Spaces, grooves evacuate, evacuate gears, bumping, marking, Sawing, cleaning, assembling, assembly of components, painting ... Product examples: • Range: VEHICLE INDUSTRY Clutch and transmission parts, magnetic body, anchor plates, Rotors, pulleys, drive shafts, deflection shafts, Hubs, wheel hubs, swing axles, engine components .. • Range: SPANNTECHNIK Base jaws, jaws block,

Your partner for innovative solutions in toolmaking and plastics technology From development and design to toolmaking and series production of high-quality injection-molded parts — we offer everything from a single source. For over 30 years, we have been designing and manufacturing injection molding tools weighing up to 40 tons and are proficient in all relevant technologies of modern injection molding technology. Our particular strength lies in producing molds for sophisticated visible and decorative parts with first-class surfaces. For this purpose, we use MuCell, gas pressure and polyurethane processes, among others. We produce foam, floor, multi-component, press and PUR tools for a wide range of applications — whether non-visible parts or high-quality visible parts such as high-gloss or open-pore decorative elements made of wood, carbon or aluminum. As a reliable development partner, we support your product throughout all project phases — from initial idea to series production. In our own technical center, we carry out tests, optimizations and final tests and thus ensure the highest quality.

X-Steel BH is a company that deals primarily with milling and turning services of different types of materials. In addition to milling and turning services, it offers welding, assembly, development and other engineering solutions. We can offer anodizing, powder coating, galvanizing, black oxidation, nickel plating and various other metal protection services. We are at your disposal for all questions

We are the leading technical wholesaler in East Westphalia-Lippe (OWL) and the surrounding area in the width range of technical trading. As a full-range supplier, we supply almost any product that is needed in the technical production routine - most of it from stock. A large variety of products, expert advice and tailored to our customer's system services set us apart. Our Service: Extensive storage ranges E-Commerce / EDI solutions System supply Individual customers online shop OSH full service Plastic cutting and further processing Outsourcing of assembly services Expert advice - even on site. Our key products: Plastics for industry and advertising Elastomer Technology Drive Technology Occupational Safety and Health Hoses and Fittings Compressed air technology Chemical-Technical Products Tapes Tools Facility LED technology.

TEBIT - The Medical Group Since 1988, TEBIT has stood for innovation, precision and quality in medical technology. With around 100 employees, we develop and manufacture high-quality components, systems and implants — from prototypes to series production. skills ✅ Development support & prototyping ✅ Series production ✅ DIN EN ISO 13485 certified ✅ High-precision manufacturing (stainless steel, titanium, aluminum) ✅ Additive manufacturing & surface finishing Our strengths High-tech machinery (5-axis, multi-spindle machines, long turners) Quality & traceability ISO class 7 cleanroom — cleaning & sterile packaging Assembly of complex components including functional tests Flexible logistics & custom packaging Focus markets medical device manufacturing dental technology traumatology Security & defense company data Zum Schnüffel 6, 58540 Meinerzhagen, North Rhine-Westphalia Contact person: Jonas Wintersohle www.tebit.de +49-2354-9295-102 | j.wintersohle@tebit.de

The ARNOLD GROUP stands for intelligent and pioneering fastening technology worldwide. Based on many years of expertise in the production of highly complex extruded parts and innovative fasteners, ARNOLD has long since established itself as a comprehensive system provider and development partner for integrated fastening solutions. The BlueFastening Systems philosophy emphasises this holistic approach: the close integration of engineering, high-quality fasteners, precise functional parts and state-of-the-art feeding and processing technology ensures maximum efficiency, sustainability and global innovative strength - all from a single source. ARNOLD has been part of the Würth Group since 1994 and is driving the future of fastening technology with maximum precision and innovative strength.

For decades we have known in the market as an efficient producer of precision turned parts and established. We see ourselves as a service provider and want to provide our customers with lasting benefits. We achieve this through continuous investment in the latest equipment, through training of our qualified Mitdenkarbeiter and close cooperation with our partners - from the first sketches to prototypes to series production. Customer orientation, trust and transparency are the basis of our actions. We are a middle class family and our thoughts and actions are guided by a long-term, socially and economically fair strategy. Advancement through technology and service