Since our founding in 1991, we deal with the development and production of customized tasks in the fields of precision engineering and mechanical engineering. The satisfaction of our customers is our top priority, every order is done carefully and reliably. All parts, assemblies and equipment left from our production tested and ready to use our house. Through good and lean organization, from order to delivery, even the smallest orders are processed economically and in high quality. The economic processes we manage through our inventory management system, the business processes of our management system. Certified to EN 9100:2018 included DIN EN ISO 9001: 2015. Meanwhile we finished with over 100 employees in Germany and Poland. We develop and design complete units of the detail drawing up to all associated documentation for the end user. If necessary, use specified or statutory approvals for the product. With our extensive range of machinery we manufacture items from almost all machinable materials, such as aluminum, brass, steel, stainless steel and plastic. On request with initial sampling and measurement protocol. In modern, well-kept rooms and rich feature set we assemble sophisticated components and devices. Also available with inspection report. We carry materials planning, procurement and storage through to our customers. For almost all pre-and post processing are we capable suppliers to the side with whom we have long-standing business contacts. This allows us to offer additional surface treatment, welding and heat treatments.

The options listed in the tab are the summary of the entire spectrum in Germany and Poland.

1956, the company was founded by Master Ferdinand saver savers then led Konrad saver on. 1998 | the company was transformed into a general partnership with Hannes & Gregor savers and has since steadily increased for new workers. Currently 11 people are employed. In addition, the company is in a second production line - the vehicle - entered. 2000 | A new headquarters was built so that even large orders can be made easily (1000 m² production hall and 1,200 m² open area). 2003, the company has repositioned itself and an internal division of duties performed: savers Hannes took over the management of the company, the technical office and production, savers Gregor assembly. 2010 adopted the SAVE GMBH all the work, the technical office is expanding, acquired in April, the SOA records and since September 9001 ISO: 2008 certified.

The tooling was founded in 1906 and currently employs 60 people. Focuses on the areas of tool and equipment, as well as contract manufacturing in the field of machining and EDM. Our customer base spans virtually all areas of automotive, capital and consumer goods industry and includes many names that are at the forefront of the world market. Construction We design our tools in 3D mainly on Catia V5 from IBM. In addition, eligible for 2D and 5-axis machining Tebis and Cadda V4 used. The data is done with dial name or e-mail in the IGES formats 2 - and 3D, VDAFS, CATIA, DXF or DWG. Toolmaking * Follow-on composite tools * Cutting and punching tools * Bending Tools * Stamping and pressing tools * Foil cutting tools * Foil deep drawing tools We design and manufacture according to supplied designs presented or patterns, tools up to a size of 1200x4000 mm and a weight of max.25,000 kg. State of the art production facilities make it possible to edit the design in 3D CNC-controlled production to initial sample inspection reports on 3D measuring machines, virtually any data and drawing documents. Years of experience and a largely self-trained staff allows us to implement safe production of complex tasks in the situation. Precise milling and wire EDM in air conditioned rooms give us the opportunity to manufacture cutting tools with an average gap of less than 10 microns. In series production, we rely on machining centers manufactured by Heller with a pallet changer. With speeds up to 16,000 min-1 and rapid traverses up to 90m/min and aluminum parts are to be machined economically Jigs and fixtures * Welding equipment * Benders * Drilling, milling and turning device * Testers * Handling Systems Another mainstay is the manufacture of devices for the mechanical manufacturing, welding machining and measurement and testing tasks. Certified welders ensure a stable basic structure, annealing furnaces for stress-free post-processing, and milling machines up to 5 axis for precise stop points in space. Modern 3-D coordinate measuring machines also help in free-form surface area to verify the accuracy measure to record and document. Contract Manufacturing CNC milling CNC turning CNC Surface Grinding CNC Wire EDM CNC sinker EDM Conv machining Welding Heat treatment Measuring and testing

The Amend steelwork and metal GmbH is a small medium-sized company in Brandenburg 70 km from Berlin. We deal with the production of steel structures in various designs for over 20 years. Established in 1992 as a private company with a production area of approximately 50 m²; we currently have a permanent staff of 33 colleagues in four production halls with a total area of 3500 m²; operate. The production halls are equipped with machinery that is the high quality requirements of steel structure requirements. Thanks to our years of experience and not least because of our qualified staff, who are always engaged active, we could also over the border also compete in the market.

Technology + Research & Development for a 100% “Made in Italy” Supply Chain A 100% Certified Italian Supply Chain which, since 2004, has been awarded the ISO 9001:2015 Quality Management System Certification followed by the BS OHSAS 18001:2007 Occupational Health and Safety Management System Certification, because the ‘Quality of the Product’ goes hand in hand with the ‘Quality of Life’. The strong attention to the ‘Details of Quality’ will lead F.lli Perin to also obtain the MOCA Certification, which guarantees processes that do not transfer to steel substances that are dangerous to human health or that could compromise the organoleptic quality of food. But the new frontier will be the Green Economy, where words such as Sustainability, Environmental Impact, and Energy Efficiency, with the acquisition of TEE Securities, give an idea of a new, imminent success. It all started in 1960, when Giovanni Perin, armed with knowledge and experience in the sector, decided to start his own business and soon became the reference point for that ‘Industrial District’, the Inox Valley, which in the meantime was developing in Veneto, between the provinces of Treviso and Belluno. Today, in its third generation, F.lli Perin srl is a world leader in the processing of stainless steel for the production of components for large systems in the Ho.Re.Ca., community, industry, and furniture sectors. A success story for a company that is capable of combining the experience of the ‘founder’ with research and technological development, paying special attention to relationships and guaranteeing a 100% ‘Made in Italy’ supply chain. Research & Development are fundamental because they allow us to have a competitive advantage through products and processes projected into the future, but it also means acquiring suitable tools. F.lli Perin, with a program of 2 million euros of investments in the last 2 years, now has cutting-edge equipment, including a Mitsubishi Fibra laser with automatic loading and unloading of the latest generation, for an even greater reliability of production. Why choose F.lli Perin? Because from the ‘Certified Italian Supply Chain’, to ‘Research & Development’, to ‘Continuous Improvement’, up to the affirmation of a ‘Strong Global Personality’, F.lli Perin has established itself on the international market with recognized competence and determination. A company history that, over the turn of two centuries, has translated into a management of the highest specialization and motivation capable of governing a dynamic technological system always aimed at the total satisfaction of the design needs of customers while also developing and proposing new ‘technological concepts’ like the new coloured surfaces that combine strong aesthetic appeal with the usual consistency and reliability of traditional stainless steel.

Our Services: - Laser cutting - Punching / nibbling - Bending and folding - Welding - Deburring / chamfering - Vibratory Finishing - Glass bead blasting - Assembly production - Surface treatment The company KM sheet metal working GmbH been able to establish a name as a strong and reliable partner in sheet metal processing in the past decades in the Rhine-Main area. A team of competent professionals, with years of experience in the machining of sheet metal parts and assemblies, help you with any questions on the sheet metal processing to the side. With machines that are on the cutting edge of technology, we can offer from laser cutting punching and bending over all production procedures that enable it to produce large series as well as prototype parts. Our loyal customer base includes, among others in the food industry, medical technology, plant construction, mechanical engineering, electrical engineering, and the petrochemical industry. You are looking for a reliable partner who will support you with your parts? We accompany you from the initial idea through the development and construction and the first production and assembly to delivery into your home.

We are an owner-managed company, the engineering services, manufacturing, finishing, assembly and product delivery offers everything from a single source. This concerns both the wage and foreign manufacturing and the manufacturing our own special equipment for the paper and paperboard manufacturing industry as well as special solutions for safety-relevant area. With our security products, we are also the owner of many national and international patents. Our machinery is constantly being renewed and the education and training of our highly qualified staff are constantly adapted to customer requirements. The high degree of vertical in almost all of the processing steps to make us a reliable A suppliers. Benefit also from the high Hennig and comprehensive know-how. Flexible and perfectly tailored to your needs. Our CNC milling machines can sizes up to 3600 x 2200 mm 5-axis milling process at the Round Table has 500 mm. The rotary department has combined rotary milling machines with Y axis and driven tools and sub spindle. Sheet metal working medium format and folding up to 3000 mm. Powder coating 3000 x 1200 x 2000 mm unit weight up to 1000 Kg Final inspection with Zeiss measuring machine Accura

Our location: In the heart of Northern Germany is our manufacturing facility, south of Hanover, is made in since 2000. There are highway connections to the motorway A7, exit Laatzen, as well as for A2, exit Lauenau. Our goal: Reliable and cost-effective production on fixed dates as a reliable factor of production Our Services: We manufacture on behalf of customers, from individual parts to complete composite group.

The OLS GmbH was founded in 2001 in Budapest. After a short time the company has achieved in Budapest and Hungary by its good quality and flexibility of a large degree of popularity. In collaboration with an East German company, we also supplied for many years German engineering companies to their full satisfaction. We have a small, highly motivated, technically well qualifed staff and modern machinery. In the management and in the construction we have mastered in addition to the Hungarian language and the German language. We manufacture for you from a simple laser or flashings to complex welded assemblies made of steel, aluminum and stainless steel. Philosophy Our goal is to meet the requirement of the customers 100%. Quality, flexibility and individual solutions are self-evident for us. Only a coordinated single process from design to completion guarantees a good end product. Our main business activities are the production and distribution of • simple sheet metal parts to complex sheet metal assemblies • welded assemblies • Steel, stainless steel, and aluminum. We design and draw with the 3-D/2D-Konstruktionssoftware Solid Edge. The OLS GmbH produces a 1,300 m2 production area with modern laser -, punching, and bending technology. In collaboration with long-standing partners, we also provide • Powder coating • Liquid Coating • burnishing, plating, hot-dip galvanizing on. Also, the transport of your products we manufacture is organized and executed.

Our company was founded in 1983 as a stainless steel wholesaler. With our machine equipment, we are now in the field of sawing and CNC milling especially specialized in stainless steels. The extensive warehousing enables us to react quickly and flexibly to customer needs. Thanks to consistent investments in modern machines, including various special saws, and the constant expansion of our service portfolio and assortment, we are today a strong and proven one Partner who enables its customers to achieve enormous cost optimization and considerable time savings in postpress. The investments in state-of-the-art milling machines enable further vertical integration. In this way, Blech + Profil can also meet special customer requirements in terms of precise and fast processing.

The company TIGEMMA, spol. s.r.o. has been active in the engineering sector since the early 1990s. It is primarily engaged in manufacturing machine parts and providing engineering services. Its own manufacturing program is focused on the area of industrial filtration, exhaust systems and material extraction tables for CNC cutting machines. In addition, we offer products and services in the field of processing refined materials such as aluminum alloys and stainless steel. These products are delivered in superior quality finishes thanks to producing them with modern, sophisticated technologies. A comprehensive manufacturing park makes it possible to ensure the manufacturing process, from shape cutting, bending, blasting, and painting the material to road transport, is integrated. MAIN MANUFACTURING PROGRAM • FILTER AND EXHAUST EQUIPMENT • MATERIAL EXTRACTION TABLES FOR THE THERMAL CUTTING OF METALS • SUCTION TABLES FOR WELDING • FANS • PRESSURE VESSELS • STEEL STRUCTURES • SOUNDPROOFING HOUSING FOR ELECTRIC GENERATORS AND PUMPING EQUIPMENT • FOOD INDUSTRY EQUIPMENT • AUTOMOTIVE INDUSTRY EQUIPMENT • TEXTILE INDUSTRY EQUIPMENT • MINERAL PROCESSING INDUSTRY EQUIPMENT

- sheet metal processing Cutting and folding up to 3 meters in length and 5 mm in thickness Manufacture of metal cups up to 100 mm high - profile bending Profiles made of steel, stainless steel and aluminum using a 3-roller ring bending machine - welding Steel, stainless steel and aluminum up to approx. 10 mm thick - saws Profiles up to 350 x 230 mm and tubes up to 270 mm in diameter - Rotate Steel, stainless steel and aluminum on a conventional lathe

The Mechanical workshop Wunderlich GmbH was founded in 1985. The focus of the company are in the areas of CNC metal processing, welding, punching, bending and forming. In 2008 the company was taken over by the current managing director Jürgen Flaig and - with the aim to achieve further specialization Grade - modernized rapidly. The production capacity of the company, the technical equipment and the demands on qualified employees grew steadily since then - step by step, year after year. Today one finds a modern manufacturing facility in the industrial area of Selb, only 2km away from the driveway to the A93. Our customers are located in very different industries and find us versatile and competent contact for metalworking. We are able to manufacture a very wide range of products able, ranging from one-off prototypes or replacement parts to high volume series production. We are particularly strong in the milling of large components on envelope, within the tolerance range of + / - 0.001. So workpieces of up to 4.000kg are workable on our horizontal milling machine. By now, we are in a position on our state of the art fully automatic circular saw for aluminum profiles of all types and solid material to cut highly accurate and reliable process and edit. Some technical details: • CNC-controlled machining of turned parts up to a diameter of 920mm and a length von1.050mm axially and radially driven tools offer the possibility of finishing in a single setup. • Conventional turning complex parts up to a diameter of 1.020mm and a length of 3,000 mm. • CNC-controlled processing of milled parts: a 40-tool magazine and reduction of non-productive time allowed an enormous rapid traverse rate, input power 40kw and spindle taper SK50 size. • Conventional milling of complex parts or small series. • CNC-controlled machining of large milling parts: 5-axis horizontal milling machine, machining of workpieces of up to 4.000kg in a single setup, tolerance + / - 0.001 mm, spindle power 63kW, pulling force of 2,000 kg axles, spindle taper SK50. • Pull grooves or grooves evacuate to a hub length of 350mm and a groove width of 42mm. • PLC controlled sawing aluminum: our state of the art fully automatic circular saw for aluminum combines the speed and cycle times of common pneumatic saws with the precision and accuracy of cut of a hydraulic system. Continuously variable speed, 15kw drive for stable average values even with aluminum solid material up to 115mm. • Mechanical eccentric presses up to 250 tons and hydraulic presses also to 250t, which are suitable for a muted die cushion also for deep drawing. • Various welding jobs for steel, stainless steel and aluminum for TIG and MAG. • hall crane for parts of weldments up to 8 tons. • Also strong we are in the turning of small parts as well as in laser cutting and bending. • Our partners assist us in processing with the following method: Galvanic zinc coatings of any kind, pickling, hot-dip galvanizing, painting and powder coating, nickel plating, tin plating, chrome plating, Hartaufchromen, Maßhartaufchromen, plasma and gas nitriding, carburizing and vacuum hardening. The company is certified according to ISO 9001:2008. Worldwide, our products are used, which requires high level of responsibility and quality. A goal that we face every day.

The laser tech Olbernhau GmbH is a medium-sized, based in Saxony companies and has made in recent years with many business partners in the industry, particularly in the field of machine and plant a good reputation as an efficient and always reliable supplier. With the latest CNC laser cutting and bending technology, we have created the best conditions for a flexible and efficient manufacturing the highest quality demands.

Wissmatec S.R.L. a company of German origin and more than 25 years of experience in the manufacturing of metal components, Plant and special engineering. 130 employees in different production areas produce on modern Machinery and equipment. ● storage and transport • carrier • steel pallets • transport boxes • storage boxes ● deployment cart • Order picking carrier • Trolley • trailer ● Container • Tanks ● Loading and unloading systems • Conveyors • Screw Conveyors • discharge systems ● Metalworking • Sheet metal working • Baugruppenfertigung ● steel structures • welded constructions ● toolmaking • fixture construction ● Design constructions in steel ● Custom

We produce sheet metal parts for a large number of different products. It includes both small and medium runs as well as single pieces and prototypes. Sheetmetal Deal example provides the sheet metal for ship doors and shutters, washing machines, egg grading, packaging, sports and playground equipment, pipe grinders, belt grinders, stone cutters, trailers, cars, salt spreaders, switch cabinets, beds, gas tanks and stole illuminations. In addition, we produce the full load stations and supply betonmallen.Ook we have manufactured an entire production line, such as packaging machinery. Many of our customers place high demands on our production because we as a production partner part of their processes. In this position, we feel like a fish in water because they give us the qualities of our company can prove best. We are proud of the capabilities of our company and the quality of our employees and will continue to invest in our customers.

The company HOLL has specialized in the production of stainless steel fasteners and exhaust chimney and ventilation systems. Furthermore, we manufacture supply metal parts for machinery and equipment. Our machinery includes, among others, two laser cutters and a CNC press brake.

We are your specialist in thin-walled sheets. Whether small or fully automated high-volume, price and performance are always in the right proportion. As professional co-maker, we provide you a comprehensive service portfolio from A to Z. - Development - Flexible Sheet Metal Working - Tools - Hard Metal Processing - Welding, laser welding - Powder coating - Assembly, packaging, shipping We offer an entire service from a single source!

GÜMAK weldments Kornwestheim, was established more than 50 years of recognized and successful welding company. Craftsmanship, motivated staff, advanced machinery and workshop equipment are the basis of our success - and to be provided off the high quality demands of the market at the same time. We are mainly designed to serve the following industries: Special machine Tools and equipment Steel construction Reliability, industrial know-how, fairness and value for money are the most important principles of our company.