The spring Technology Group, headquartered in Kaltbrunn produced at 4 locations across Switzerland and has over 80 years of experience in the development and production of springs made of wire and tape, assemblies and mounting hardware. Portfolio: Compression Springs: In the range of dimensions, shapes and finishes. We process wires and rods of 0.2 mm to 20.0 mm in diameter as well as materials with rectangular or square cross-section up to 15 x 15 mm. For the following spring forms we have been established: cylindrical tapered (0.2 to 20.0 mm) biconical fitted barrel and chimney-shaped (0.2 to 3.0 mm) Our specialty: Progressive springs (0.2 to 3.0 mm) Extension Springs: In the range of dimensions, shapes and finishes. Oesenform according to customer requirements. We use different materials in the wire diameter range from 0.2 to about 10 mm; 10 mm to 16 mm without lugs, but with tabs or threaded inserts. Rotation and torsion springs: in the range of dimensions, shapes and finishes. The combination of turns, thighs and shapes are virtually no limits. We process materials round, square and flat wire diameter range from 0.2 to about 6 mm. Larger wire diameter on request. Bent wire parts: We have an excellent infrastructure for the production of wire bending parts in a variety of shapes and finishes for medium and large series. We process materials in the diameter range from 0.2 mm to about 6 mm. Flat springs: leaf springs are metal mold parts which possess elastic properties, to clamp, hold or rest. The great diversity requires an enormous mobility and overview. We use different materials in thickness from 0.1 mm to 4 mm, width up to 300 mm (cold or hot worked). Other dimensions on request. Processing in hard condition or processing in soft condition with subsequent tempering.We manufacture flat spiral springs and disc springs. Stampings: We develop and manufacture for you Stampings according to your wishes and requirements. We advise you from the design to the mature part series. Our modern prototype workshop provides you with a short first sampling. The necessary tools are manufactured in our own workshop and our new punching and bending machines manufacture your parts at high speeds with maximum precision. Material thickness: Thickness 0.1 mm to 3 mm, Width up to 160 mm. Materials: For the production of your springs we process the different materials. - Alloyed and non-alloyed steel - Stainless steel - Copper and wrought copper alloys - Heat-resistant spring material

Manufacturing all types of springs for industry: compression spring, torsion spring, extension springs, flat springs, shaped springs

We are specialised in springs, wire parts, and metal assemblies.

For more than 60 years, we provide technical springs in small, medium and large series ago. We are particularly proud that we have skills and know-how have in almost all industries. Our products Pressure springs from 0.2 to 7.0 mm wire thickness Wire bending parts & torsion springs from 0.4 to 4.0 mm wire thickness Tension springs from 0.4 to 4.0 mm wire thickness Rotational springs from 0.4 to 4.0 mm wire thickness

see for yourself

Our recipe for success is quite simple: Satisfied and loyal customers the highest quality and optimum service. We are from AZ for you. From the creative product design to on-time delivery fully applies: You can rely on us. The company Wilhelm Löbke Federn GmbH has evolved into a modern, future-oriented operation with spacious, expandable production areas since 1935. In September 2006, the company Wilhelm Löbke Federn GmbH has been reviewed by the South Westphalian Chamber of Commerce and Industry and has been awarded a recognized training company.

Production of technical springs, leaf springs, flat springs, contact springs, stampings, stamped and bent parts, bending parts 2D laser parts max. 3mm stainless steel and 6 mm mild steel grades Individual production and batch production. Assemblies and assembly

Production of printing, train, torsion springs, bent wire parts in batch, small-and large-scale production of all common materials, such as Federst. Variety DH, CrSi, 51CrV4, 1.4310, 1.4571. Wire size range: 0.20 to 28.00 mm Special alloys such as Hastelloy, Inconel, BeCu on request. Leaf springs, metal stamping, and bending parts (spring) steel strip Thickness from 0.10 to 3.00 and width 1.5-120mm Production is according to customer specifications (drawing, sample or information)

The company Johann Vitz GmbH & Co. KG was founded in 1908 and produces today over 350 state of art machines to almost 10,000 sqm plant area springs, stamped and bent parts. Flexibility, innovation and high quality standards make it possible that products of our manufacture in almost all industrial sectors such as the automotive, telecommunications, mechanical engineering or Haushaltsgeräteindustie come nationally and internationally. Partner for individual solutions We find the right solution for almost any task.

The COHN coil springs + equipment manufacturing GmbH produced in a more than 70-year tradition not mass produced, but individual and small productions. An order therefore includes no more than 2-50 pcs in individual and small productions. But of this, our company also stands for the timely and detailed manufacture of the products. Our company operates with 16 trained and quality conscious employees pure contract manufacturing and works in a two-layer system from 7:00 bis 23:00 clock. In addition, we supply our product range "feathers" which among other things Laser, the dental and optics industry.

Calculation, design and sales of springs (extension springs, compression springs, torsion springs, spiral springs, wire and flat molded parts, bending parts and assemblies) of round, flat and square wire. Springs: - Wire thicknesses up to 3.3 mm (round / flat / square) Applied end turns or open - Ground end coils or unprocessed - - All winding body geometries feasible (cylindrical, barrel-shaped or waist, Beehive, Taper) Extension Springs: - Wire thicknesses up to 2.8 mm (round / flat / square) - All possible Ösenformen feasible (incl. DIN) - With adjustable internal bias voltage (eg to achieve digressive characteristics) Torsion springs: - Wire thicknesses up to 4.5 mm (round / flat / square) - All leg shapes feasible - As a simple torsion spring, double torsion spring, torsion spring quadruple Spiral springs: - Wire thicknesses up to 3.0 mm (round / flat / square) - Windungsverlauf freely adjustable - With or without molded legs - All possible Ösenformen feasible (incl.DIN) Wire and flat springs: - On winding, coiling, bending centers of brands Wafios, Itaya, Simplex Rapid or BIHLER - Wire thicknesses up to 4.5 mm (BIHLER up to 10mm) Coils: - Wire thicknesses up to 4.5 mm - From enamelled copper wires with stripped and tinned ends - RF coils of silver-plated copper or bronze wire Stampings: - Bandwidth up to 120mm, thicknesses up to 10mm - Additional Technologies welding, threading, bolting our BIHLER automata - Assembly of components including processing of supplementary parts (plastic parts / screws / wire springs, etc.) - Tubes of strip material with and without slot, tape ends clinched or shock Manufacturing technologies: - Winde-/Wickeltechnik - Stanz-/Biegetechnik - Grinding of spring ends - Shot peening - Heat treatment - Surface Technology - Setting and testing - Isolation & automatic packaging All manufacturing technologies can be linked if required! Materials: - EN 10270-1/-2/-3 / / EN 10151 / / etc. - Copper, beryllium copper, bronze, brass, copper alloys, etc. - Cr / Ni steels and duplex steels - Surface-treated and plastic-coated wires - Composite materials RIBE has its own tool and a house plant! Development & Construction: - CAD with interfaces to all major 3D CAD programs - Spring calculation software - FEM analyzes / FMD possible Certifications: - DIN ISO 9001 - ISO / TS 16949 - ISO 14001 - OHRIS Connection technology: Screws as drawing parts, Pleulschrauben, motor screws M2 - M24, cold formed parts, rivets production quantities of 50,000 pieces We look forward to meeting you!

Manufacturer of wire and flat springs Cutting pieces on press EtFormage cutting machine on multiple slides

Production programme: - Elements for household appliances (metal and plastic components) - Elements for auto industry - Elements for electro industry - Turning parts, drilling parts - Springs – compression, torsion, extension - Bending elements ( wire and strips –Bihler system) - Tool development, our own tool shop - Tube elements - Pressed elements up to 500 t - Injection of plastic and injection of plastic and metal together - Casting of aluminium, brass and copper alloys and mechanical treatment of these elements - Heat treatment (hardening) - All types of robotic and automatic welding - Rolling and cutting threads up to M40

We edit and customize all Arte of feathers and feather products, and bending parts.

The BLG srls manufactures steel wire-mesh grids in all geometrical forms and shapes for a wide range of shelvings end exhibitions stands for industry and trade. Production is mainly on bulk contract-basis as well as costom-made supplies. the Blg 's wire-grid products are directed to producers and suppliers of paint brushes, metal furniture, shelvings and exhibition stands to sales outlet of all kinds and sizes. Diameters used from 2 mm to 10 mm

Nedschroef is a leading supplier of sophisticated fasteners and cold forming machinery to the most demanding customers. A long history in cold forming and solid sales provides a strong foundation for meeting future market demands. Nedschroef builds on a very strong relationship with its customers to achieve the mutually best solutions to ensure the highest performance. Nedschroef offers a wide range of solutions for every market. Exemples below: Fasteners Cold formed products Turning component Stamped component Forming component Bended Parts Assembled parts C-parts

Dear Ladies and Gentlemen, since we run a business for 32 years, we would like to offer you our range of products and our services. Our company has been in the production of print, train, torsion, Doppeltorsions (double leg), Springs for hinges, special springs (Power Springs) for vacuum cleaner - springs for winding the cable, magazine springs and special springs from wire and band produced on "bendability machines". Experience, we have also in the manufacture of springs for safety belts in automobiles. We use Durchmässer wires from 0.1 mm to 4.0 mm and strip thickness to 2 mm. Doppeltorsionsfedern we produce for 15 years. Every year is produced in our more than 120 million of these springs. After our production program and the size we are the main manufacturer of springs in Croatia. If you want to choose us as a long-contemporaneous partner, you can enjoy our benefits: - The most modern lines with a very high level of automation and thermal processing - Own design, tool room and own patented inventions - An automatic control device - A stable supply of export materials from all dimensions - Very quality products for the best prices and short delivery times - Development of new products in collaboration with our customers, where our team with great experience to Verfühgung. To ensure the quality, we use the standard ISO 9001.

French company of 30 people with a consulting firm specializing in the manufacture of springs for industry. From a single piece with the mass, with wire diameter of 0.1 mm to 20 mm. NOVARESSORT provided on the industrial, aerospace, defense, textile, heavy weight .....

BAUMANN GmbH Germany was founded in 1964 in Lichtenstein. The company operates at global level in the field of development, production and sales of springs, pressings and special products. Extensive automation of the production processes guarantees an optimum price-performance ratio. Our customer segments range from the automotive industry through electrical and medical technology, mechanical engineering and engine building to manufacturers of household appliances. In our Lichtenstein works, we currently employ over 200 qualified personnel in development, production and sales. Motivated and systematically trained, our employees have state-of-the-art technologies and processes at their disposal.