Metalworking

Industrial Design - Metal - Machine - Engineering

Ottmar Schiek Maschinenbau was formed in 2013 with the takeover of Manfred Kriwet Düsseldorf. Wolfgang Harings founded. We have many years of experience in the field of sample production for materials testing, including foundries, heavy engineering, heat treatment, welding process technology and pipe manufacturers. We are specialists in the production of heat-resistant copper welding components and contact jaws as well as contract manufacturing in the areas of sawing, turning, milling and drilling. As an owner-managed company with one employee, we have many years of professional experience. The quality and reliability of our work are our top priorities.

MECABOSCH, is a machining workshop with more than 45 years at the service of the industry, with extensive experience in mechanization and productive know-how, which has allowed it to build customer loyalty, always providing an adequate response to their demands. With a qualified team of 40 people, and facilities of more than 3,000 m2, including 600 m2 for assemblies, we offer a comprehensive service to the engineering and manufacturing industry of machinery and capital goods.

As a highly specialized manufacturer of sensors and measurement electronics with almost 50 years of experience, we have the knowledge and equipment to design and manufacture complex fine-mech components, assemblies and electronic circuits. If your project requires this knowledge, we will be happy to develop components for you and take over their manufacture. Centerless grinding / through grinding Outer diameters from ø 0.7mm to 20mm and lengths up to 3000mm Centerless grinding / bar grinding / rod grinding / tube grinding Flexible and unstable geometries such as springs, tubes, hoses, rods, etc. Materials: steel, stainless steel, titanium, cobalt-chrome, PTFE, PEEK, POM, aluminum Production of turned and milled parts Conventional turning as well as CNC turning and milling Steel, stainless steel, aluminum, brass, bronze, nickel, titanium and various plastics bar machining from 5 to 80mm diameter, 200mm in three-jaw chuck maximum turning length up to 500mm, milling parts up to 300mm x 300mm, 10kg construction and creation of 3D data and drawing derivations TIG welding manual / CNC TIG welding Manual and CNC TIG welding of steel and stainless steel Single parts up to 1000m length and part weight up to 10kg Including design and manufacture of welding gauges and auxiliary fixtures Highest quality requirements with welding approvals If required, various welding seam tests / quality tests Laser welding and laser / photon beam welding in vacuum Welding of smallest components and thin wall thickness (membrane) Low heat input and therefore minimal distortion High welding speed with best cost efficiency Welding of metals with different melting points Vacuum welding for critical materials like titanium, etc. Single parts up to approx. 1000m length and part weight up to approx. 10kg Development of electronic circuits Development / schematic design of electronics in the field of measurement technology PCB layout / board design / circuit board unbundling and optimization Construction of functional samples / prototype construction / initial sample series Graphical user interfaces for PC or embedded systems Driver development for Linux, Windows and Mac Firmware development for microcontrollers Production of electronic boards Printed circuit boards Production of electronic boards according to customer specifications / blueprint Small to medium series production in the quantity range of 10-1000 pieces Testing / optimization of circuits and implementation of adjustments SMD basic assembly and conventional soldering of components for customization

Welcome to the V-Tec Europe GmbH On the following pages you will find information about our company and our products. We provide high quality standards for our products. Further developments, improvements and novelties, which were the goals for our Height Adjusting Elements (HVE). Take advantage of our years of experience in the field of Adjustment as problem solving, for your applications. When you didn´t find the right solution in our standard product range, we are able to manufacture in cooperation with our partner, products according to your needs. Possible Applications: The Height Adjustment Elements are used in any application where different heights adjusted, or surface irregularities must be balanced. Due to the different variations, the settings can be found already proven applications in the areas of: Automation technology Drive technology Mechanical Engineering Plant engineering Special engineering Transmission engineering wind power stations

We specialize in the manufacture of drive elements such as Timing belt pulleys (focus) Sprockets Poly-V and V-belt pulleys -Klemmverbinder/Klemmplatten For timing belt Gears Turning, drilling and milling parts In addition, we provide timing belts in almost all versions and divisions (Neoprene / PU / Flex / welded / processing such as punching, grinding, coating, etc. is possible)

The Karl Hoch GmbH is a family of 3 Generation with currently 40 employees. We, the Karl-HIGH GmbH, dominate as one of the few companies on the market almost all metal cutting process for large components, because we have a comprehensive range of machines. Our equipment and experience of our employees are the foundation of our competence. It includes the machining of large parts with high precision, the mass production of difficult to machine materials and repair of complete machines and motor units. The name stands high for over 75 years for reliability and customer focus.

In terms of dimension, we take it very well: Maximum experience and minimum tolerances. When we speak of our work, we are talking about a whole new dimension in engineering. For with the largest processing machine parts, it is not just about extraordinary dimensions, but also precision and efficiency to passion and commitment. The Leipert Maschinenbau GmbH has evolved into one of the leading specialized company in Europe for the manufacture of large parts. And this is no accident: Even with manufacturing dimensions of up to 34 meters, we are able to reduce the tolerances to an absolute minimum. In order to achieve this dimension of accuracy, give all our employees their best every day.

The t.i.m.a.s. is a company that performs precision machining performing work on materials such as cast aluminum, extruded, cast iron, steel, nylon, stainless steel. reliability and quality have always been the company strengths ISO 9001: 2008 SQS

Our machining looks back on a long tradition. Since 1936, precision parts at this site at Wittenberg in Saxony Anhalt, sawn, drilled, turned, milled, ground and mounted. Under the leadership of Mr. Uwe Buder since 1988, today we are working on the latest technology for single and series production. Our long-standing relationships rich nationwide in machinery, equipment, apparatus and vehicles.

As a supplier, we machine different types of steel, stainless steel, aluminum, copper and brass, specializing in more complex parts with small tolerances. These are processed into semi-finished or finished products using computer-controlled machines (44). The focus is on series with quantities starting from 1000. (Fetch smaller numbers possible) We machine up to Ø 65mm For a good impression of VCN mass turning: www.vcnbv.nl (company film)

The Company employs three professionals, two of them with a master's degree. These professionals for decades as a machine metal cutter (lathe, milling, jet drilling) working, thus gaining extensive experience in the profession. That professional experience essential basis for the production of high quality components. - Production of individual, small series or agricultural parts, resp. we perform machine component renovations within the framework of contract work. Company with the following “traditional” cutting machine tools in: - FGS 50/63 TOS Kurim universal high - performance milling machine (for table worktop size: 1800X630, X = 1400, Y = 630, Z = 500), - Optimum 460/1500 top lathe (with Mitutoyo gauge), - Rf 50 jet drill (with MK50 main spindle cone) - KUF 250/500 mantle and bore grinding machine, - Optimal band saw.

The company Rahm GmbH & Co. KG in Oberndorf is a medium-sized family business in the field of precision mechanical engineering. Our versatile machinery enables us to react quickly to your needs. The strength of our company lies in the production of precision turned parts on our ultra-modern and efficient six-spindle machines in medium and large decrease lots. In addition, we offer a 100% inspection of our products which we carry out cost through automated testing committee in our home. Secure cost-effective manufacturing processes are ensured by the quality management system DIN EN ISO 9001:2000 and the use of highly qualified staff. What can we do for you? Let us convince you of our quality - made in Germany. Materials We process the following materials: * Cutting steel * Stainless steels (stainless steel) * Heat-treatable steels * Aluminum * Brass Surface treatments Our goal is to supply you with a finished product. As a manufacturer of turned parts we have no independent electroplating in the house. Here we are working with very reputable companies from the region. Thus we are able to supply you with your turning parts with any desired surface and heat treatment. Performance profile Experienced installers bring their many years of practice, the problem of each rotary member to the point and ensure that the customer product exactly according to his specifications, on time and to a receives excellent value for money. Machinery * TAJMAC-MTM - MORI-SAY 6/20 AC * TAJMAC-MTM - MORI-SAY 6/20 AC * TAJMAC-MTM - MORI-SAY 6/32 * TAJMAC-MTM - MORI-SAY 6/32-S * Tornos - SAS 16 DC - * Tornos - SAS 16 - * Tornos - AS 14 - * Tornos - AS 14 - * Tornos - AS 14

Metallservice Haar GmbH has been a successful supplier of welded assemblies for 23 years. Our certified welders carry out your orders professionally. Our specialists are accompanied by a welding specialist and an internal and an external quality representative. Large quantities can be produced cost-effectively thanks to our production know-how through continuous optimization.

Automatic turned parts on cam and CNC automatics from 2 to 40 mm in all metals (steel, stainless steel, Copper, Aluminium, plastics. from 200 to 100.000 pieces. 1 CNC automatic lathe MAZAK QT8 diam 10 to 40 mm x 80mm 1 CNC automatic lathe MAZAK QT10 diam 10 to 40mmx80mm 1 CNC swiss-type automatic lathe MANURHIN KMX first diam 5 to 25 mm x 130 mm 1 CNC swiss-type automatic lathe MANURHIN KMX 413 diam 3 to 16mm x 130 mm 1 CNC swiss-type automatic lathe TSUGAMI S20(D) diam 5 to 18 mm x 400 mm 1 CNC swiss-type automatic lathe TSUGAMI B018-B diam 4 to 16 mm x 150 mm 1 CNC swiss-type automatic lathe TSUGAMI NP-11 diam 2 to 10 mm x 120 mm 1 CNC swiss-type automatic lathe TORNOS DELTA 20/5 diam 4 to 20mm x 120 mm 3 automatic lathes TRAUB A-25 from 4 to 25 mm 5 automatic lathes TRAUB TC15 from 2 to 16 mm 2 swiss-type automatic lathes PETERMANN from 2 to 10 mm 2 conventional milling machines 1 transfert machine

Company has used its long-standing knowledge and experience in civil production sector as well. The main part of civil production covers: welding of structures, their machining and assembly into final products such as traffic, constructional, handling and agricultural facilities. In 2004 more than 80 % of civil production had been made for foreign companies mainly from Germany and Great Britain. Continual investment into advanced machine holding, production workshops, experience of our businessmen, technicians, workers and very good relations with our customers are very good conditions for further development of co-operation production development. Over the last year there has been turnover of 2,5 billion CZK and positive profits. Currently there is 950 employees. Supervision of management, prescribed product properties and parameters are guaranteed by permanent quality control. The company has been certificated in accordance with ČSN EN ISO 9001: 2001, and AQAP 2110 standard and process of welding according to ČSN EN ISO 3834-2:2006 standard both connected with the company informational system. The company is a member of the Economic Chamber and a member of Czech NBC Team aliance (www.nbcteam.cz) operating under the patronage of Czech Trade - the national trade promotion agency. International highway routes, railway service and nearby international airport enhance company international business/co-operation. VOP 025 is situated in the middle of a large industrial region with a lot of companies able and ready to co-operate. Production of engineering parts of building and handling machines, production, cutting, machining, welding, assembly and painting. Welding certificate according to the EN 729-2

Turned parts and quick couplings. Roles,