Metal fabrication company based in Bucharest, Romania with 30 years of experience in this field. With Lloyd's Register quality assurance system and multiple CMM's and length machine, the main purpose of our work is client satisfaction. Try us or, if opportunity comes along, visit us! Regards

Calculation, design and sales of springs (extension springs, compression springs, torsion springs, spiral springs, wire and flat molded parts, bending parts and assemblies) of round, flat and square wire. Springs: - Wire thicknesses up to 3.3 mm (round / flat / square) Applied end turns or open - Ground end coils or unprocessed - - All winding body geometries feasible (cylindrical, barrel-shaped or waist, Beehive, Taper) Extension Springs: - Wire thicknesses up to 2.8 mm (round / flat / square) - All possible Ösenformen feasible (incl. DIN) - With adjustable internal bias voltage (eg to achieve digressive characteristics) Torsion springs: - Wire thicknesses up to 4.5 mm (round / flat / square) - All leg shapes feasible - As a simple torsion spring, double torsion spring, torsion spring quadruple Spiral springs: - Wire thicknesses up to 3.0 mm (round / flat / square) - Windungsverlauf freely adjustable - With or without molded legs - All possible Ösenformen feasible (incl.DIN) Wire and flat springs: - On winding, coiling, bending centers of brands Wafios, Itaya, Simplex Rapid or BIHLER - Wire thicknesses up to 4.5 mm (BIHLER up to 10mm) Coils: - Wire thicknesses up to 4.5 mm - From enamelled copper wires with stripped and tinned ends - RF coils of silver-plated copper or bronze wire Stampings: - Bandwidth up to 120mm, thicknesses up to 10mm - Additional Technologies welding, threading, bolting our BIHLER automata - Assembly of components including processing of supplementary parts (plastic parts / screws / wire springs, etc.) - Tubes of strip material with and without slot, tape ends clinched or shock Manufacturing technologies: - Winde-/Wickeltechnik - Stanz-/Biegetechnik - Grinding of spring ends - Shot peening - Heat treatment - Surface Technology - Setting and testing - Isolation & automatic packaging All manufacturing technologies can be linked if required! Materials: - EN 10270-1/-2/-3 / / EN 10151 / / etc. - Copper, beryllium copper, bronze, brass, copper alloys, etc. - Cr / Ni steels and duplex steels - Surface-treated and plastic-coated wires - Composite materials RIBE has its own tool and a house plant! Development & Construction: - CAD with interfaces to all major 3D CAD programs - Spring calculation software - FEM analyzes / FMD possible Certifications: - DIN ISO 9001 - ISO / TS 16949 - ISO 14001 - OHRIS Connection technology: Screws as drawing parts, Pleulschrauben, motor screws M2 - M24, cold formed parts, rivets production quantities of 50,000 pieces We look forward to meeting you!

Production programme: - Elements for household appliances (metal and plastic components) - Elements for auto industry - Elements for electro industry - Turning parts, drilling parts - Springs – compression, torsion, extension - Bending elements ( wire and strips –Bihler system) - Tool development, our own tool shop - Tube elements - Pressed elements up to 500 t - Injection of plastic and injection of plastic and metal together - Casting of aluminium, brass and copper alloys and mechanical treatment of these elements - Heat treatment (hardening) - All types of robotic and automatic welding - Rolling and cutting threads up to M40

As a family business, Metalldesign Schmitt deals in the broadest sense with the treatment and processing of metals of all kinds. The focus of our work is the construction and assembly of stair and balcony railings through to larger steel structures for industrial applications. We are suppliers to both industrial and private clients, but thanks to our modern machinery we can also provide various contract work services for other metalworking companies. In addition, we are also specialists in the construction of clean rooms or special custom-made products according to customer specifications. Our company Metalldesign Schmitt was founded in 2010 and is based in the restored ensemble of the former Saarbrücken-Burbach railway repair shop, which has been prepared for all kinds of businesses. With few exceptions, the well-preserved buildings date from the time when the factory was founded (1857) and thus contribute to the unmistakable character of the location. Metalldesign Schmitt has found optimal possibilities here for its production and working conditions. We deal with all types of metal processing. We have modern machines and well-trained specialist staff at our disposal for this purpose. We are a registered welding company and fundamentally certified according to DIN EN ISO 9001:2008. Especially for the complex requirements in the field of welding technology, we are certified as a specialist welding company according to DIN EN ISO 3834-3. We also have certificates from various regulated areas.

Your solution partner from sample process to mass production.

We are all about punching and bending parts professionals! Production and consulting by R.Schulze GmbH. With many years of experience, we produce punched and bent parts in all series sizes. Our workshop is also specialized in the design and construction of prototypes. For toolmaking we design and create complete punching tools For customers who want to take the finished product, we deliver stamped and bent parts in all desired quantities. By a far-reaching automation of production, large series can be produced quickly and precisely. The core competences of our certified company are: Punching technology: Production of stamped parts and bent parts in large series Toolmaking: Design and creation of high performance punching tools Feeding technology: Feeding of stamped parts and bent parts by means of special feeding technology

The company KABU-Kuhn Forming GmbH was founded in 2002. As subcontractors we work to order according to customer requirements. We produce stamping, bending and drawn parts of metal. We have particular experience in the processing of stainless steels. The produced parts can be washed in our industrial washing machines and thus delivered from oil and grease. There are a drum washing machine for bulk and pass a washing machine. When washing in the continuous washing machine the parts retain their scratch-free surface. Furthermore, we assemble modules and assemble with spot and projection welding on our two welding machines together. Also the welding of nuts and standard parts is possible. The picking of the goods is the number of items and packaging on request. We are always interested in new business areas and are able to produce for all areas punching, bending and drawing parts. To fully meet customer orders, we offer in cooperation with renowned moldmaking companies in the manufacture of tools.

With the company move in 2013, Elpas gained a production area of 5,000 m2. Thus we were able to expand our machine park immensely and optimize our production processes. Our goal is to achieve the best possible customer satisfaction and product quality with the existing competition in the automotive industry. It is important for us to provide technical advice before and after the start of the project, any suggestions / suggestions for improvement for product design and the best possible planning of the necessary tools, test devices, etc.

MÜLLER metal processing + Locksmith We are a young, dynamic company with qualified personnel. Our range of services extends from mechanical processing on weldments to general locksmith and metal construction. MÜLLER metal processing + Locksmith was established in 2005 as a classic one-man locksmith under the name "metal builder Sven Müller". By konsequnte implementation of our corporate philosophy, the power spectrum has been constantly expanding. Here, we developed a service provider in the metal processing. Philosophy: If you only ever do what you can already You'll also only remain what you are already.

INDUSTRIAS ALZUARAN, founded in 1959, is a spanish ISOTS16949 certified company dedicated to the manufacture of stamping parts with heat treatment, such as retaining rings DIN-471,472, 6799 spring washers DIN-2093, safety washers DIN-7967, wave washers, clips,.. etc…and special parts according to drawing or sample up to 6 mm in thickness. Our main customers are related to automotive industry, locks, home appliances, windmills, electric market, machinery and hardware distributors. Our export percentage is around 35% to many different countries such as Germany, Austria, Belgium, Brazil, Colombia, South Korea, Czech republic, Denmark, Dubai, France, Holland, India, United Kingdom, Israel, Italy, Japan, Morocco, Mexico, Norway, China, Poland, Romania, Singapour, Slovakia, South Africa, Sweden, Turkey, USA, Venezuela ..etc… You can find further information, visiting our web page www.alzuaran.com If you are interested in our products, or want technical advice, you can submit your enquiries to j.a.barrenetxea@alzuaran.com, and we will kindly answer you.

Your partner for sheet metal processing - competent, innovative and flexible! As a specialist in our field, we offer a wide range of manufacturing and machining options. Thanks to our state-of-the-art machinery, we are able to manufacture, process and coat components cost-effectively, quickly, on time and with a high quality standard. Whether individual parts, small series, large series, circuit boards, bent or welded structures, up to complete assembly, with the highest standards of quality and performance. Quality assurance goes without saying. The company's own 3D construction processes all common file formats. Of course, we also design in-house to optimize production. Together with our qualified staff, we offer you high-quality products from prototypes to series-ready products. We are looking for personal contact with our customers, scrutinize all wishes and concerns. Expert contacts and friendliness in all areas are part of our corporate philosophy.

Production of assembly jigs and fixtures / Production of tipper semi-trailer / Production of Automotive component parts and doors / Production of Construction equipments

Punching & bending is the focus of our work. We supply high precision punching and bending metal parts that are required in large numbers. Our value consists of price, quality and service. Today most industries require a permanent cost improvement and we are able to help them delivering the best value at the right price. In our production, we use machines that are associated with a specific manufacturing tool, carrying out several procedures in a single work step on a highly cost-effective way.

Many years of experience and recognized competence in the market for heat generator products are the essential characteristics of INTERDOMO GmbH. An important element of this recognition is based on our know-how in the stamping and forming technology of welding and final assembly of the product. We expect to be able to meet the high demands of the market in terms of quality, technical implementation and delivery service and absolutely excellent. In the absolute knowledge of our strengths, we have defined our business purpose as follows: Development, production and sale of components, assemblies and systems that are generated by the technologies punching metal forming, welding and assembly.

The wishes of our customers Complying with their requests with realistic possibilities Feasibility and tests, sample parts, offers Quality of monitored processes We meet by Ideas and know-how Fast Terminabstimung, pattern production and Deals Qualified employees, process control, on time delivery

BAUMANN GmbH Germany was founded in 1964 in Lichtenstein. The company operates at global level in the field of development, production and sales of springs, pressings and special products. Extensive automation of the production processes guarantees an optimum price-performance ratio. Our customer segments range from the automotive industry through electrical and medical technology, mechanical engineering and engine building to manufacturers of household appliances. In our Lichtenstein works, we currently employ over 200 qualified personnel in development, production and sales. Motivated and systematically trained, our employees have state-of-the-art technologies and processes at their disposal.

Dear Ladies and Gentlemen, since we run a business for 32 years, we would like to offer you our range of products and our services. Our company has been in the production of print, train, torsion, Doppeltorsions (double leg), Springs for hinges, special springs (Power Springs) for vacuum cleaner - springs for winding the cable, magazine springs and special springs from wire and band produced on "bendability machines". Experience, we have also in the manufacture of springs for safety belts in automobiles. We use Durchmässer wires from 0.1 mm to 4.0 mm and strip thickness to 2 mm. Doppeltorsionsfedern we produce for 15 years. Every year is produced in our more than 120 million of these springs. After our production program and the size we are the main manufacturer of springs in Croatia. If you want to choose us as a long-contemporaneous partner, you can enjoy our benefits: - The most modern lines with a very high level of automation and thermal processing - Own design, tool room and own patented inventions - An automatic control device - A stable supply of export materials from all dimensions - Very quality products for the best prices and short delivery times - Development of new products in collaboration with our customers, where our team with great experience to Verfühgung. To ensure the quality, we use the standard ISO 9001.

The study and implementation of press tools for cutting and stamping. • The mass production of cut and stamped parts. This is a team of 48 people, dynamic and effective methods, validated by a panel of more diversified customers: automotive, hardware, tools, construction, electricity, electronics ... ROUGETTE TECHNOLOGIES provides: • A consulting firm performing the design, development and improvement of tools for cutting and stamping. • A mechanical workshop producing tools, adaptation and implementation tools at points of cuts and drawing and spare parts. • A workshop presses from 50 to 500 tonnes for the manufacture of spare sets of cuts and stamping. • The management of other services such as surface treatment of parts to deliver a finished product.