Precision Turned Parts

Torneria Montesi has been operating since 1964 as a trusted partner in the subcontracting of mechanical components in numerous industrial sectors. We are a company that produces custom-made components and standard products for our catalog using mechanical turning and rolling processes. The surface is organized on two production divisions in which the machine tools dedicated to turning and rolled threading are coordinated. To support there are two logistic units dedicated to the warehouse and distribution. Safe, organized and controlled environments reflect their own order on the work of collaborators, guaranteeing precision and punctuality. We are specialized in proposing innovative techniques and appropriate solutions for the creation of each single component. Our strength: The synergy between technological areas: turning and cold forming are in close contact to integrate into the efficiency of production but also to become complementary to each other in the production challenges of qualitative excellence. The synergy between production logics: custom-made products made to design with lean and kanban philosophy intersect with standardized products stored in the warehouse and offered for industrial distribution. The synergy between product logics: customized products inspire evolutions and improvements of our standard products. Synergy with customers and suppliers: from our customers we look for challenges that can allow us to grow, from our suppliers we obtain increasingly targeted solutions. The synergy between our people: we all have room for improvement and the first opportunity to obtain it is the sharing and comparison of knowledge within us.

“Our roots in toolmaking — your future in contract manufacturing” We have been specialists in punching tools for many years — precision and quality are our DNA. On this basis, we are taking the next step: From now on, we will also take over your contract manufacturing. Whether prototype, small series or series production — you benefit from our specialization in toolmaking and from a partner who understands manufacturing down pat. Rely on proven experience — in punching tools and contract manufacturing.

We specialize in the manufacture of machine turned parts up to diameter of 32 mm made of steel, Stainless steel, 1.4305, 1.4301, 1.4021, aluminum, brass and plastic, POM, PE, PTFE, PP. Our production program includes axles, shafts, bolts, bushings, rollers, rods, threaded sockets, Sifte, screws, pipes, spacer tubes, fittings, sleeves, threaded sleeves, connectors, screws, nuts, standard bearings, inserts, plugs, rivets, and shafts. Of course, we provide pre-finished parts, with the necessary surface coatings.

Company History From the company was founded in 1975 Enders a GmbH was founded in 1984 by Klaus Enders split. In the first years of the existence of parts were manufactured for the bicycle accessory industry mainly. Due to the high entrepreneurial spirit of Mr. Enders, the company expanded steadily. After cleavage of the GmbH, the production moved into the field of medical and precision engineering. It all modules and units were built. In this industry sector, the company established to Mr. Enders Enders the end of 2002 put to rest. Since 2003, the company Enders is under new management. The company was taken over by Mr. Karsten Enders, Mr. Reiner Holder and Mr. Thomas Henkel in equal parts. The production was put to wider columns before the takeover. So we ask today manufactures products for the fiber optic industry, dentistry, medical technology, security technology, welding equipment manufacturers, leisure industry, automotive suppliers and camera manufacturer.None of our customers has more than 35% share of our annual turnover. Through our wide range of products, the competitive situation is not a constant work load for us. We are also able to react quickly by our lean management and order processing to changing situations. Our strength is to offer customers a complete low-cost unconventional production. Through flexible use of our machinery, we can also respond to customer requests quickly. Our order situation has steadily improved in recent years. For this reason, we have moved to larger premises in December 2007. By moving us to improve our production workflows. Here you can see an overview of our production program We are able to deliver the finished components, including all common surface treatments able. Items We manufacture items in all common materials, titanium, tool steel, stainless steel, aluminum, brass and plastics. Sheet metal parts We can process sheet metal parts in small series: cutting, stamping, bending, points etc. Assemblies We assemble the components manufactured by us with your Beistellteilen or offer you complete solutions. Special machines We develop customized solutions to your tasks. Devices Devices are part of our day's work. To produce economically are essential thought-out devices. Complete equipment We provide you with complete equipment in salable packaging. as well as tools such as punching tools or special tools for service technicians etc.

GTS Gate To Steel GmbH is a German company based in Düsseldorf. We are based in the field of mechanical and plant engineering. Our subsidiary is located in Wuxi near Shanghai. We have been in our line of business in China since 2004. We know the market and business inside and out. Our customers are German companies that sell industrial equipment to China. We are not an intermediary! GTS produces itself in its own hall. GTS takes over the production of the local production portion in China for the customers. We manufacture both entire assemblies and individual parts - it only depends on the needs of our customers. Of course we can also take care of the transport to Europe and all related formalities. We stand for: German quality made in China Know-how protection Customary market prices On-time delivery Our highly qualified team in our own assembly hall, together with a proven network of sub-suppliers, form your extended arm in China. Together they realize your projects in your usual German quality. GTS offers you an all-round carefree package tailored to your requirements.

We are an owner-managed mechanical engineering company with a focus on steel and rolling mill technology and general mechanical engineering. HICO Stahl- und Walzwerktechnik GmbH was founded in 2009 as a result of many years of cooperation between an engineering office and a service provider for spare parts, repair and modernization of plants. Core services include the design of machines, production of spare and wear parts for production plants, and maintenance and repair work.

High flexibility is the hallmark of Saffe Machining GmbH Large part machining Cutting the wage CNC milling Wage Turners Milling services CNC turning CNC milled parts Turners for small series Hard milling CNC turning services Automatic turning Assembly Machining of large parts CNC milling CNC turned parts

Since the foundation of our family business in 1980, is for us the service in the foreground. Personal advice, customer proximity and short lines of communication are that we provide in addition to our high standard of quality and good value for money, some benefits them. As a distributor (representing industry), trading house and manufacturer, we combine competences and different technologies under one roof. Through our network of specialists, we are able to offer a wide range of products. The basis of our quality management system, our certification according to DIN ISO 9001. Take advantage of our experience and technical know-how. Please let us know what we can do for your company specifically. We look forward to your inquiry!

Manufacture of both simple and complex turned parts Processing of all common materials Turned parts up to a diameter of 32 mm Our range of services includes both small and large series production Your partner for precision turned parts for over 25 years. The company Rometsch Drehteile GmbH + Co.KG has stood for the highest quality standards in precision turned parts for over 25 years. As a traditional manufacturer of long-turned parts, we have deliberately defined guidelines in order to always meet the requirements of our customers. Because in addition to quality, high standards and reliability, things such as sustainability and dealing with employees also play a major role for us. Thanks to our company headquarters in Trossingen in the Tuttlingen district, we also benefit from an excellent infrastructure, which enables us to react flexibly and quickly and thus creates the conditions for implementing processes efficiently. Thanks to our new production hall built in 2002 with over 1,000 square meters of production space, we are also able to reliably manufacture even high capacities. Thanks to the use of the latest CNC lathes, we are able to produce both simple and complex turned parts of first-class quality. Our processing processes, which have been optimized over the years, allow us to produce and process a wide variety of materials particularly efficiently — individually according to customer requirements. For your requirements for long-turned parts, we offer in the area of CNC processing: * Manufacture of both simple and complex turned parts * Processing of all common materials * Long turned parts up to a diameter of Ø 32 mm * Our range of services includes both small and large series production. A selection of our industries: * Mechanical engineering * Watch industry * Hydraulic *Optical industry *Automotive *Individual solutions Who delivers what? We offer the solution! Just talk to our team.

Zannini is an international group that produces high-precision turned metal components for the automotive, electrical, hydraulic, oleodynamic sectors and we are also taking our first steps in the Hydrogen and Aerospace sectors. With our CNC machines (bar passage from 2 mm to 65 mm) we work all turning materials (automatic steels, stainless steel, 42CrMo4, aluminum, ETG, and others), we are also equipped with grinding machines, sanders, deburring machines and machines for 100% control.

In contacting Franchin's mechanics you will find a dynamic company with a strong spirit of innovation, capable of seeking new solutions, even the most personalized, always ready to offer the best of herself in formulating formulas for an efficient and complete service. It was born in 1975 at Montebelluna near Treviso, with the aim of setting a point of reference for any company that needs molds for cold stamped sheet metal products or special turnovers, or to find solutions to its own constructive needs in this field. Our relationship with the customer is not simply reduced to a supply contract but we provide a wealth of technical knowledge and a range of practical solutions that are more than thirty years of experience. We also allow our Customers to design our product (E-Project) with us, to determine the desired quality and finish (E-Quality & Finishing) as well as numerous packaging and storage modes at our warehouse (E-Stock Market). From a little advice to a more complex technical analysis (E-Link), the contract with the customer always translates into a relationship of trust and collaboration, which has enabled us to establish and develop time. Alongside our experience, we can now boast cutting-edge equipment, able to respond to almost all the construction requirements in cold molding, turning and machining.

Arfino specializes in the production of precision-turned components in brass, bronze, and aluminum, with a particular focus on lead-free alloys. The most refined surface finishes and the tightest tolerances emerge through the use of the highest quality machinery and tools. The company, aware of the need to systematically and documentedly ensure a high quality standard for its products, has established a Corporate Quality System that meets the needs of its customers.

Serres Gear Factory has been a family business for over 50 years, always combining tradition and modernity in its services and products. Therefore, the Serres gear factory is always very close to its customers and suppliers, as well as the delivery of high quality products.

decolletage company located in the heart of the valley of the Arve cradle this business for over 100 years Strong experience in the manufacture of machined parts high clarification small medium and large series of 2mm diameter 32mm diameter for various sectors such as aerospace automotive industrial medical fixing etc ... Respect for the quality of the time and price are our quotes

The CEBES a.s.company was established in 1999 and with a considerable portion of its production it carries on a tradition of more than 60 years in manufacturing commutators, brush holders and slip rings at MEZ Brumov Company. The company also carries out repair of commutators, brush holders and slip rings. The CEBES a.s. company has implemented and operates an Integrated Management System. The company holds certificates for both the ISO 9001 Quality Management System and ISO 14001 Environmental Management System.

The Grabacz GmbH & Co. KG has been working since June 2003 in Münster. We specialize in the precise order manufacturing in the fields of - CNC turning - Erode - Micro-hole drilling - Milling - Grinding (cylindrical grinding and surface grinding) - Drilling - Welding and - Module assembly specialized. In addition, we can offer them editing options through our partner companies. We look forward to your inquiries!

We are experts in the design of products from bar turning and machining , we bring you the best technical, economic, quality, logistical and ecological solutions. Our approach is characterized by a vision of the future, envisioning industrial excellence, with respect for our planet, with a close location of production. Our fields of action are: • FORGING • CASTING • MACHINING • STAMPING • TUBES & PIPES • SPRINGS • PLASTIC PARTS