We are a well-known corporation here in Egypt started from 2015 in the industrial field with many oil&gas companies here in Egypt and in MENA region also. Mainly, we could fabricate many parts used in piping and pipelines departments like flanges, Mechanical sealing clamps and other piping components. Although the pandemic happens at the end of 2019 we have interrupted in our market so we are pushed to turn our market into a visual market starting there with companies in the USA like FICTIV as a manufacturer on demand then we changed our compass to Europe specifically in German with XOMETRY Europe. all of our work start from manufacturing and end with shipping the order to the customer under the DAP protocol. We aim to widen our market area in many regions and many fields with high quality and competitive prices.

We are looking for new challenges and customers to whom we would like to offer our broad experience and performance at the highest quality level. On modern CNC lathes and CNC milling machines / machining centers we manufacture complete finished parts or contract work in small, medium and large series.

Dear Sirs, The tech group Genthin is an owner-managed family company whose origins can be traced back to the establishment of a company in 1990. At the beginning, Mike Pietrzak traded in automotive parts and accessories. The company's change to today's tech group was the result of economic changes. These were used through sensitivity and a helping of courage to realign oneself. After completing their training, he began to involve his sons in the company. They should continue the traditional company and raise additional pillars. In 2016, the family's business acumen proved to be correct once again, and the market expansion in the industrial and energy sectors was successfully accepted. The Genthin tech group with 50 employees is now known throughout Germany in certain industrial sectors. The number of employees is increasing steadily and thus the company is broadly positioned in the trade and industry in the highest quality. The areas of application of the subsidiaries are divided as follows: Moto-Tech Genthin GmbH, Am Kröpelberg 2, 39307 Genthin - CNC processing according to drawing (with or without certificate) as well as special, individual and series production (travels: X1060, Y600, Z600 mm / table sizes: 1200x600 mm) - mechanical processing / contract manufacturing (turning, milling, honing, surface grinding, point grinding) - Repair, maintenance and repair of internal combustion engines (e.g. Deutz, CAT, MAN, Mercedes, Hatz, Kubota, MWM etc.) - Procurement of spare parts and replacement engines - Radiator cleaning and repair Service-Tech Genthin GmbH, Parkstr. 6, 39307 Genthin - Maintenance + repair of industrial equipment and engines - Troubleshooting - Container and plant construction (all materials) - Stainless steel welding and apparatus construction (as a subcontractor with CL1 certification) - Complete support of CHP and emergency power systems Elektro-Tech Genthin, Parkstr.6, 39307 Genthin - Electrical installation in residential buildings (conventional and smart home) as well Industrial and government buildings - Electrical installation, maintenance and repair of automation technology - Electrical installation / repair on industrial plants and vehicles - Equipment check (stationary and mobile) - Generator and electric motor maintenance as well as repairs (external) - Supervision, installation, retrofitting and maintenance of street lighting KFZ-Tech Genthin GmbH, Am Kröpelberg 2, 39307 Genthin - vehicle repair - Painting of industrial furniture and automotive parts - tire service - bodywork - Spare parts trade - TÜV and AU - insurance benefits - Vehicle fleet service for larger companies (with provision of a Workshop replacement car tailored to the corporate customer) All companies in the Genthin Tech Group are DIN ISO9001 certified and, despite their large number of areas of application, have a flat hierarchy.An operations manager or deputy is available to you as a contact person and specialist for each area. The accounting of all companies is organized jointly by the tech group. Our management is at your disposal for business matters. Partnership relationships as well as individual projects are gladly handled and maintained together with operations managers and the management. If you are interested in our group of companies, we would be happy to speak to you personally. You are also welcome to obtain more information on our website www.techgruppe-genthin.de. Wit...

Serres Gear Factory has been a family business for over 50 years, always combining tradition and modernity in its services and products. Therefore, the Serres gear factory is always very close to its customers and suppliers, as well as the delivery of high quality products.

Machine Shop CNC turned parts CNC metal machining

The CEBES a.s.company was established in 1999 and with a considerable portion of its production it carries on a tradition of more than 60 years in manufacturing commutators, brush holders and slip rings at MEZ Brumov Company. The company also carries out repair of commutators, brush holders and slip rings. The CEBES a.s. company has implemented and operates an Integrated Management System. The company holds certificates for both the ISO 9001 Quality Management System and ISO 14001 Environmental Management System.

We are still in the start-up phase. Are only active since 01.10.2017 as a subcontractor in Dortmund.

www.mzo-arndt.de

We are a young and dynamic family company with more than 45 years of experience in turning, milling and all kinds of construction work. We are the ideal partner for all your turning, milling and construction work. You can come to us for both piece and series work in all possible materials, such as stainless steel, copper, aluminum, plastic, tantalum, manganese, hard tissue, etc.

decolletage company located in the heart of the valley of the Arve cradle this business for over 100 years Strong experience in the manufacture of machined parts high clarification small medium and large series of 2mm diameter 32mm diameter for various sectors such as aerospace automotive industrial medical fixing etc ... Respect for the quality of the time and price are our quotes

The Grabacz GmbH & Co. KG has been working since June 2003 in Münster. We specialize in the precise order manufacturing in the fields of - CNC turning - Erode - Micro-hole drilling - Milling - Grinding (cylindrical grinding and surface grinding) - Drilling - Welding and - Module assembly specialized. In addition, we can offer them editing options through our partner companies. We look forward to your inquiries!

In addition to fasteners such as screws, nuts and washers, our portfolio also includes CNC turned and laser parts. The dimensional range is between Ø 1-5 mm in all common (special) alloys from the areas of steel, brass, aluminum and stainless steel. We are also happy to supply you with ready-made goods, e.g. goods packed in sets consisting of several components or already assembled assemblies. See for yourself and contact us!

SC NAPOTOOLS SRL is a company that sells and produces tools, stamps, matrices and SDVs, based on the future, with national activity, based in Cluj County Romania. We develop and manufacture products for almost all industrial fields, according to the highest quality and technical standards. Our product portfolio includes the entire assortment of molds, tools, punches and SDVs: 1. Products made by powder metallurgy, whose geometric configuration is extremely complicated, varied and with very large tolerances; 2. Molds of elastic deformation; 3. Stamps used in the paper industry and printers (labels); 4. Cold and hot deformation and embossing dies, 5. Molds for injecting plastics

Our company was founded in 2014. After 20 years of experience in tool making, we would like to pass on our knowledge. You have tasks related to stainless steel or plastic, then we are your contact. Free-cutting steel or tool steel is also no obstacle for us.

Established in 1992, our company has extensive experience in metalworking. We currently employ 50 workers. Our production include: CNC MILLING: We can vertically process dimensions 3000 × 1500, horizontally dimensions 2500 × 1500. CNC TURNING: Fi 1000 × 1500 turning capability. GRINDING: Flat - max. dimensions 3000 × 1500 in                      Round outer + inner Fi 450 × 2500. TOOLS: We produce all kinds of tools for stamping, forging, normals, plastics and various preparations. CLASSICAL MILLING AND CUTTING: We offer milling services up to 1600 × 800 and turning to Fi 1500 × 500, Fi 400 × 4000 and Fi 600 × 1500. WELDING OF STRUCTURES: Structures can be welded up to 3000 × 1500 and up to Fi 1200 on a circular welding table. MATERIAL CUTTING: Cutting is possible on band saws up to 800 × 800 and flame CNC cutting up to 4000 × 2000. We also have our own material warehouse.

We are a motivated and dynamic SME specializing in the contract manufacturing of turned and milled parts. Thanks to our efficiency and short decision-making processes, we are able to produce cost-effectively and on time.