VoTec GmbH is your reliable supplier when it comes to machining. Founded in 2011 between Osser and Großer Arber, we have specialized in the Technologies milling and turning, both as a single part and in series. Due to the continuous modernization of our machines, we have managed to present a machine park that more than meets the state of the art. For example, all lathes are automated, both with loading magazines and robot technology.

About Us: Since 2003 we manufacture in our factory in Bangalore, India, precision turned and milled parts for numerous German and Indian companies. We achieve attractive unit cost reductions both in mass production and in small series and individual parts. We offer the cost advantages of the Indian site in German quality and reliability of supply - both your contact and the distribution center are located in Germany. Range of services: The range of our production ranges from welding, milling and turning to heat treatment, assembly and surface treatment. For production, we have a comprehensive machine available, including a wide variety of CNC precision turning and machining centers, which were imported from Germany. For high-quality follow-up of parts such as hardening or anodizing and production as well as other steps that can not be realized in our home, we have a network of Indian suppliers available with which we have been working successfully for many years. Logistics / customs clearance: If you use our work in India for purchasing parts, you have nothing to do with the logistics - to the delivery of your order we will take care. We assume both the customs clearance as well as the logistics of your order, the transport is either via air or sea.

We offer a professional service for repair and service all main spindles with ball bearings. Our experience of more than 25 years is a solid foundation. More than 12´800 repaired spindle units were successfully serviced. Our focus are based on customer relations, cost tranparency and effeciency. All replaced parts are reported and pictured. In any case you are welcome to visit our facilities in order to trust our services. NEW! We offer taking out and rebuilt off and into the machines at customer side (Field-Service) including installing tool changer and geometry of the axis.

“OIL AND GAS EQUIPMENT PLANT” LLC is engaged in the development and production of a wide range of equipment for the oil and gas production and refining industry, metallurgy, energy. The enterprise management system is certified according to ISO 9001: 2015, ISO 14000, OHSAS 18001 (ISO 45001). We would like to offer your company cooperation in the machining of metals. Below you can see other types of work that we perform: 1. Turning (equipment: ST25, ST40HE, ST45 with the option "big bore", 1740RF3, 16B16T1, 1V340F30, 1510, 1531M, 1M63, 1A64, 1M65, 16K20, 16K40) linear dimensions from 10 mm to 3000 mm, diameter from 10 mm to 1250 mm 2. Milling (equipment: VF3YT with rotary table HRT310, EC1600YZT four-coordinate FP17M, Heckert FSS-315, 6P83, 6T13) linear dimensions from 10 mm to 16000 mm, diameter from 10 mm to 700 mm 3. Boring and coordinate boring (equipment: 2A622 with upgraded digital display 2A614, 2V440A) the sizes of a working zone are 1120х1250 mm 4. Drilling (equipment: 2C132, VO-63, 2532L) the sizes of a working zone are 1100х2300 mm 5. Grinding (equipment: ZA164, 3M132V, 3M153, 3L722A, 3D711V, HSH83A, 3K228) round grinding: linear dimensions from 10 mm to 2000 mm, diameter from 10 mm to 400 mm flat grinding:: the size of the working area 1250x320x400 mm internal grinding: linear size up to 1200 mm, hole diameter from 40 mm to 400 mm 6. Heat treatment of details according to drawings of the customer or the technical task. Our sales department and service department are also available to quickly answer all your requests. Please give us the way where we can contact on the issue of cooperation

ABR Srl operates in the field of mechanical subcontracting by providing its customers with high precision mechanical construction services (3D milling with CNC machine with 5 simultaneous axes), construction of functional parts through additive manufacturing, 3D printing and reverse engineering (for probing and / or laser scanning); high-tech machinery and many years of experience in the design of complex machines make ABR Srl a reliable and competent partner with a strong multidisciplinary connotation. The plant is located a few hundred meters from the A19 motorway that connects Palermo to Catania, favoring the supply times of raw materials and product distribution.

The story of success ZNTK - Radom GmbH was founded in 1887. Since the company's founding principle of our is the constant development and modernization of the products offered. The products of our company are mainly intended for the railway industry. We specialize in the production of the valve elements that are used in train braking systems. Our mission is to deliver the parts for the rail industry, which have been manufactured with the highest quality. Our goal is to ensure the best delivery and prices to our customers. Guarantee the highest quality Our professional and highly qualified staff together with the experienced management guarantee the highest quality of products and services offered. Internal quality management system ensures the fulfillment of your refined quality requirements. Width production possibilities ZNTK - Radom Ltd. specializes in the production of parts and equipment that are used in the rail industry and the automotive industry.Our professional staff and the universal machines enable the production of parts and assemblies according to customer specification. We can also easily adjust our production capabilities to meet customer expectations. Thus we have the flexibility to accept various orders of the metal industry. Our production capabilities include: - Machining - Ductile forming - Heat treatment: Carbunieren and inductive hardening - Electric melting and Gasschmelzscheiβen - Surface treatment - Sandblasting - Painting - Assembly For the majority of our products, we use CNC machines. Striving for the ever-evolving customer expectations, ZNTK - Radom GmbH focuses not only on the highest quality of offered products, but also on the search for new production solutions that satisfy the data reported by the customer's needs to the best level.

Precision engineering, CNC milling and CNC turning are our specialty. Metal and plastic parts, as an individual part or series, we manufacture in the quality you want. Our clients in the following areas: * Medical * Aviation * Machine Industry * Plant * Chemical industry rely on our flexibility.

Information about SCHAIBLE Product programm Dear Sirs, we are proud to present you our varience of products and services the Schaible company can deliver: 1.We produce precision turning parts beginning from ø 1 mm up to ø 65 mm. Therefore we use modern CNC and conventional-turning machines. Your most ambitious parts we can produce on our 9-axis high technology machines like Citizen M20, Traub TNC30, TNC42 or TNC65. 2.We produce gears and pinions (beginning from module 0.2 up to module 3.0; with a maximum diameter of 80 mm) with modern and precision-milling-machines (e.g. Koepfer, Monnier&Zahner, Wahli) as well as worms up to module 2.5. To assure our high quality production we use modern measurement systems. 3.Supplementary production We have a wide selection of machines which enable us to do specific upgrade processes on your parts (e.g.grinding machines, super finishing machines, polishing machines, ...). All of our inspection, measuring and test equipment is network based. We are able to do statistical process control (SPC). We will fulfill all common requirements on quality recording. Our Quality-system is implemented based on DIN EN ISO 9001:2000. We are certificated since Oct.1999. We have customers in nearly all fields of industrial production (e.g. automotive, gear motors, medical, precision engineering, electrical, inspection and measuring industry). Our customers appreciate the technical consulting we can provide to optimize their parts already during the planning and engineering phase. For many years we are system supplier for a lot of German and international automotive suppliers. We work with all kind of materials as brass, steel, ETG, stainless steel, plastics, etc. and are able to do hardening and galvanic processes. To give you an impression of our company a prospect is added to this writing. Of course you are always invited to contact or visit us, so we can show you more about our production and capabilities. We focus on our work to solve your problems. We are sure that we can fulfill your requirements, because our staff is high-qualified and motivated. The cooperation with our customers is very tight and based on experience over dozens of years in our business, so we are able to avoid mistakes and unnecessary costs. We hope this short explication will call your attention. We would be happy to start business with you on partnership.

We are the specialists when it comes to machining large components - Carousel turning - boring. For over 30 years your reliable partner for timely workmanship.

V-Mecc works for all sectors that require a high level of customisation and precision. Thanks to our capacity and the competences of our team, we are able to offer high efficiency and quality at competitive prices. Our CNC machines offer the best results for prototyping, functional and assembly tests, fixing masks and devices and functional components for the final customer.

More than 15 years ago the owner Gabriele Togneri decided to give up his job as Production Manager in a big company to create his own company in Lucca to produce mechanical components. Our name is a promise: we offer to our clients the best Italian excellence in mechanical precision, in order to respond to different requests from all the major industrial sectors and to guarantee high quality and productive standards. Innovation, evolution, quality and upgrading are the four keywords that guided the evolution of Meccanica Precisa up to today, placing the company in the highly competitive market and guaranteeing Italian excellence.

Kaufmann Micro mechanics is on the market for Micro Precision Engineering is a fast growing, technically well equipped company that works with today's most modern and efficient machines. The capacity will be 100 million monthly parts. We serve clients in the following industries in over 50 countries around the world with rotating parts, of medium to large series: Automotive industry Plug-in connection Electrical and electronics industry Micromechanics Engineering Watches and jewelery Industri

Gutekunst connecting parts GmbH is your specialist for standard parts and custom parts. In almost all materials we manufacture from small to large, from simple to complex. By default, we process all common plastics, steel and nonferrous metals. By an appropriate stockpiling we can respond to our customers' requests in individual cases quickly.

The company was founded in 1986 in ASEDO Dombühl We employ 120 highly motivated employees, mainly metal and electrical workers in two shifts. Our key business principles are: Use of resources by qualified and motivated employees for the benefit of our customers, as well as to our company The business concept is based on independent, responsible employees who get involved with fun at work and maintain a partnership, human interaction with each To maintain and expand through their own goal-oriented training and education continuity and quality Their top-quality products to manufacture. To achieve this, we pay attention since time immemorial in all areas on the consistent implementation of this principle. This supports our existing since 1995 certification in Quality Management, since 2001 according to DIN EN ISO 9001-2000

The transmission plant Pirna already exists since 1885 at Pirna and our staff have many years of experience in the machining of stainless steel, steel, gray and ductile iron. We already today deliver parts and components for manufacturers of agricultural machinery, motor manufacturers, make Subcontracting for foundries and much more. The flexible use our extensive machinery production quantities are available from individual production to small series to mass production. Our production is divided into the areas of milling and turning with the most modern machining centers. Through cooperation with companies for castings and forgings, we are able to manufacture complete assemblies from a single source. Quality control with CNC-controlled 3D measurement technique is guaranteed. The aim of the transmission plant Pirna GmbH is to supply our customers with high quality and on time.

The KAUTZ fixture GmbH develops and produces machinery, equipment, single and series parts for about 30 years. Our competitive advantage lies mainly in the wide range of products and the flexibility to implement individual customer requirements. Behind our performance power are 200 employees and an area of 8,500 square meters, on which we can edit machine parts weighing up to 80 tons in the KAUTZ Group

PRECISION Responsibility and the joy of precision. We are aware of the factors that lead under any circumstance for optimum quality. The same quality standard applies to us for all services in the field of logistics. In order to ensure the highest quality controls are carried out regularly. The control processes are permanently performed using specially designed instruments. (Roughness / 3D microscope) As a result of the interaction of our internal processes, the customer products and services that are tailored to its needs receives. TECHNOLOGY Smallest and Largest in varying complexities. Our expert staff is able to effectively and efficiently to solve with the existing infrastructure budding functions in the interest of the customer. An orderly and transparent information and data flow to production ensures the speedy implementation of the orders. CNC milling X max. 1000mm Y max. 500mm 6 machining centers with up to 4 axes. CNC turning Ø 3 to 280mm L = max. 750mm 5 CNC lathes 4 Double-spindle lathes with up to 6 axes. LOGISTIC We are with our logistics in the position to call the customer already in orders binding delivery. Manufacturing, planning, management and delivery - vertices that we know to master. Procurement of standard parts and subsequent bench assembly of mechanical assemblies. Full implementation of all logistical tasks related to your orders. Storage of customer references Kanban JIT deliveries. PRODUCTS Regardless of the quantity of an order, each part is made made by us in accordance with the appropriate specifications, tested and declared fit for each. The constancy of the high manufacturing quality ensures, among other things, for the tremendous customer satisfaction. • High precision stainless steel housing. • Complex multi-sided machining on double-spindle lathe. • complex, labile aluminum part with surface treatment and Laserbeschhriftung

General mechanical engineering is one of the oldest areas of engineering. We specialize in CNC machining technology for small and medium-sized industrial companies. In most cases, we manufacture products according to the plans of our customers, but are also active in other areas of mechanical engineering, eg. B. fixture construction.

Deco Srl . is a leading Italian manufacturer and exporter of turned parts according to technical drawing. The range of our product line, good quality, and competitive prices have made us one of the fastest growing companies of its kind in Northen of Italy. Located in Brembilla, we produce turned parts according to technical drawing with the diameter 3-100mm up to 1500mm in length of all ferrous e non ferrous materials. We at Deco Srl will work with you to produce the types of turned parts according to your needs . We guarantee both our quality, technical support and on time delivery of shipments and our prices are very competitive. For more information please go to our web site at www.decosrl.it