We are a company whose main focus is the creation of smart engineering solutions in the field of new product development (ideas) and their physical implementation through high-tech CNC production. Quality, service, trust and value!

Reselling company for fixations, specialized in fixations for the automotive industry, turned parts, self-cutting screws for plastics and light metal.

LACHER ENGINEERING & MANUFACTURING TECHNOLOGY Lacher is a mid-sized enterprise and a manufacturer of engineered products. At company headquarters in Frankenmarkt in Upper Austria's Alpine foothills, we have specialized in CNC Turning, Milling and loops as well as special processing methods such as honing. Lacher is synonymous with precision, technical expertise and innovation. Founded in 1969, the company introduced an early age the course for special products. Since then it has continuously expanded, increased its production capacity and renewed its machinery. Today Lacher presented as optimistic about the future sighted pilot plant. Translation by Google Translate

We are your competent partner when it comes to individual productions. With serious murder machines and careful professional handwork, we will manufacture it unique. Accurate down to the smallest detail. We offer: CNC turning and CNC milling

Indoors Outdoor spaces Sharpening broaches CNC turning CNC milling Poking (Profile) Surface grinding Distribution of broaches We realize complex processes
through our extensive range of machinery.
Turning and milling parts with gearings / profiles
be fully prepared.
Your wishes and demands
our focus.

Milling 3 axis to 5 axis simultaneous 2 Progr Progr places with Cimatron software All materials which are machined Sharing 30% VA 40% Steel 25% Al residual copper and Sondermat. Demanding milling 3 to 5 axis milling and hard

Welcome to the V-Tec Europe GmbH On the following pages you will find information about our company and our products. We provide high quality standards for our products. Further developments, improvements and novelties, which were the goals for our Height Adjusting Elements (HVE). Take advantage of our years of experience in the field of Adjustment as problem solving, for your applications. When you didn´t find the right solution in our standard product range, we are able to manufacture in cooperation with our partner, products according to your needs. Possible Applications: The Height Adjustment Elements are used in any application where different heights adjusted, or surface irregularities must be balanced. Due to the different variations, the settings can be found already proven applications in the areas of: Automation technology Drive technology Mechanical Engineering Plant engineering Special engineering Transmission engineering wind power stations

MECABOSCH, is a machining workshop with more than 45 years at the service of the industry, with extensive experience in mechanization and productive know-how, which has allowed it to build customer loyalty, always providing an adequate response to their demands. With a qualified team of 40 people, and facilities of more than 3,000 m2, including 600 m2 for assemblies, we offer a comprehensive service to the engineering and manufacturing industry of machinery and capital goods.

We are manufacture of complete hydraulic systems. You can get everthing from one hand, our hand. Wir plan and produce all hydraulic units. Powerpackes, cylinders and manifolds are our own construction and produced form Schild. Also Hydraulic Units with an complete electrical steering you can get at our company! Best Qualtity for lowest prices Spare Parts like pumps, valves, hoses or fittings can be deliverd very fast because of a stock of more than 20.000 parts. We are an official distribution of EATON Vickers

Precision since 19971958 Foundation of VEB Schrauben- und Normteilewerk Hildburghausen After Reunification, the company is broken up and the turning shop is taken over 1990 Conversion to Verbindeelemente GmbH 1993 Privatisation of Verbindeelemente GmbH and continuation of activities by TORNO Verbindeelemente GmbH 1997 Purchase of fixed assets and inventory by Maier Automatendreherei GmbH in Dunningen, Baden-Württemberg, and foundation of Maier GmbH & Co. KG on the former “Schraube” industrial estate. 1998 Initial certification in accordance with DIN EN ISO 9001 2005 Construction of a new production building on own premises in the “Schraube” industrial estate. Creation of 5200 m2 production area and 500 m2 administrative area. 2006 Initial certification of environmental management in accordance with DIN EN ISO 14001:2004 and introduction of an integrated management system. 2007 Finalist Award of the “Großer Preis des Mittelstands” (prize awarded to Germany’s most successful medium-sized enterprises)

Our family Orlowski CNC machining was founded in 2005 by J. Orlowski in Mettmann. As a reliable supplier with core expertise in CNC milling and turning technology we have built a modern machine park over the years: Here diverse Bearbeitungsaufganben can be performed through effective production processes. We provide, inter alia, complex products in small and medium series here, but also special parts and prototypes for the engineering and mining industries. Our customers come from the fields of mechanical, hydraulic and valve technology, equipment and plant engineering and precision mechanics. Particularly in these industries is the highest level of quality is an essential prerequisite. A hypothesis whose fulfillment is guaranteed by our dynamic team to 100%.

PTS - precision engineering Schunder Your partner for CNC - Machining and manufacturing of steel components up to a length of 20,000 mm and an Weight of 32 tons. You want a competent, reliable and experienced suppliers? We have the latest CNC - to deliver on time, best quality technology invested by you always. Our core competence - metal machining In this area, we are leaders in Southern Germany We offer a wide variety of processes in the CNC - machining on: saws - Burn - Welding - Milling - turning - grinding - Exhibitions

As a highly specialized manufacturer of sensors and measurement electronics with almost 50 years of experience, we have the knowledge and equipment to design and manufacture complex fine-mech components, assemblies and electronic circuits. If your project requires this knowledge, we will be happy to develop components for you and take over their manufacture. Centerless grinding / through grinding Outer diameters from ø 0.7mm to 20mm and lengths up to 3000mm Centerless grinding / bar grinding / rod grinding / tube grinding Flexible and unstable geometries such as springs, tubes, hoses, rods, etc. Materials: steel, stainless steel, titanium, cobalt-chrome, PTFE, PEEK, POM, aluminum Production of turned and milled parts Conventional turning as well as CNC turning and milling Steel, stainless steel, aluminum, brass, bronze, nickel, titanium and various plastics bar machining from 5 to 80mm diameter, 200mm in three-jaw chuck maximum turning length up to 500mm, milling parts up to 300mm x 300mm, 10kg construction and creation of 3D data and drawing derivations TIG welding manual / CNC TIG welding Manual and CNC TIG welding of steel and stainless steel Single parts up to 1000m length and part weight up to 10kg Including design and manufacture of welding gauges and auxiliary fixtures Highest quality requirements with welding approvals If required, various welding seam tests / quality tests Laser welding and laser / photon beam welding in vacuum Welding of smallest components and thin wall thickness (membrane) Low heat input and therefore minimal distortion High welding speed with best cost efficiency Welding of metals with different melting points Vacuum welding for critical materials like titanium, etc. Single parts up to approx. 1000m length and part weight up to approx. 10kg Development of electronic circuits Development / schematic design of electronics in the field of measurement technology PCB layout / board design / circuit board unbundling and optimization Construction of functional samples / prototype construction / initial sample series Graphical user interfaces for PC or embedded systems Driver development for Linux, Windows and Mac Firmware development for microcontrollers Production of electronic boards Printed circuit boards Production of electronic boards according to customer specifications / blueprint Small to medium series production in the quantity range of 10-1000 pieces Testing / optimization of circuits and implementation of adjustments SMD basic assembly and conventional soldering of components for customization

• forms and jigs • mold and composite casting in all common aluminum alloys • Machining in CNC technology • 3D coordinate metrology We have for decades been an established company in the metalworking industry and place the highest value on quality and delivery. In "altmann" high-quality molds and composite casting is manufactured in all common aluminum alloys, for unit weights of 30 g to 3.5 kg. Our annual output is about 200 tons.

The Karl Hoch GmbH is a family of 3 Generation with currently 40 employees. We, the Karl-HIGH GmbH, dominate as one of the few companies on the market almost all metal cutting process for large components, because we have a comprehensive range of machines. Our equipment and experience of our employees are the foundation of our competence. It includes the machining of large parts with high precision, the mass production of difficult to machine materials and repair of complete machines and motor units. The name stands high for over 75 years for reliability and customer focus.

Metalworking

We specialize in the manufacture of drive elements such as Timing belt pulleys (focus) Sprockets Poly-V and V-belt pulleys -Klemmverbinder/Klemmplatten For timing belt Gears Turning, drilling and milling parts In addition, we provide timing belts in almost all versions and divisions (Neoprene / PU / Flex / welded / processing such as punching, grinding, coating, etc. is possible)

Industrial Design - Metal - Machine - Engineering

Ottmar Schiek Maschinenbau was formed in 2013 with the takeover of Manfred Kriwet Düsseldorf. Wolfgang Harings founded. We have many years of experience in the field of sample production for materials testing, including foundries, heavy engineering, heat treatment, welding process technology and pipe manufacturers. We are specialists in the production of heat-resistant copper welding components and contact jaws as well as contract manufacturing in the areas of sawing, turning, milling and drilling. As an owner-managed company with one employee, we have many years of professional experience. The quality and reliability of our work are our top priorities.