A. WENZLER GmbH & Co.KG has produced precisely engineered turned parts for industry since 1962. The company is considered to be one of the leading partners in the automotive and medical technology sector. When Jens Kurzhals, machine operator at Wenzler was interviewed, he said: "Our pieces are not supposed to be good, but excellent.“ He only needed a few words to sum up the philosophy of the company steeped in tradition: We want to move the world forward a little bit with every turned part. s t r u c t u r e: Size of operation: 42 employees, breakdown: 30 in Production, 4 in Administration, 3 in Quality Assurance, 5 apprentice (cutting machine operator) QM System: Certified according to ISO 9001:2002 and ISO/TS 16949:2002 Sales in 2008: 5.0 million Euro Investments 2008: 1 million Euro p r o d u c t i o n: Materials Free cutting steel, case hardened steel, structural steel and tempering steel, rust and acid resistant steel as well as extrusion metals such as brass, copper, aluminium and titanium Further processing Polishing, honing, deep hole drilling as well as all kinds of thermal and surface treatments

Sulzer Innotec at a glance Facts & Figures Sulzer Innotec, for 60 years, the research and development center of Sulzer, performs contract research and specialist technical services and makes significant contributions to the strengthening of the divisions and the development of new business areas of the Sulzer Corporation. Quality According to the principle of continuous improvement, a process-oriented, integrated management system has been created at Sulzer Innotec, it includes the relevant elements for a sustainable development of health, safety, environment and quality. History End of the 40s were in demand with the introduction to the gas turbine development of new technologies, about the time did not have the Sulzer Corporation in sufficient measure. Thus was laid with the creation of central bodies for materials and fluid mechanics, the foundation stone for the future corporate research.

- Turning and machining - Production of specialty fasteners - Repairs and overhaul of water, gas and steam turbines - Regeneration and manufacture of friction bearings - Manufacturing of Ultrafiltration systems

h3> Contract Manufacturing /h3> Our employees in the manufacturing operation are exclusively genuine and well-trained professionals, they are thus the high standards of quality, reliability and flexibility grown. In our mechanical workshop both functional models and prototypes as well as items and small to medium production runs are manufactured from drawings, sketches or verbal information quickly, flexibly, precisely, we are set up projects for the following work..: CNC milling CNC turning Cylindrical grinding Surface grinding etc. In addition, our employees perform repairs and inspections of machine tools, and special machines, eg also from our NORM Surface Grinding Machine. Complete manufacturing of special tools, jigs and fixtures and assemblies and assemblies of general mechanical engineering with increased requirements complement the activity area.Of course, we wish still the best NORM Surface Grinding ago. Take advantage of these benefits. Whether express part or complete machine: Try us, we are ready! The main editing options, please see our machines directory.

Main activities: production and assembly of machine parts based on drawings. As a main contractor the company is ready to undertake production from pattern making to delivery of finished products. rough machining and finish machining of castings (unalloyed and alloyed steel; GG20-GG30 and GGG40-GGG70, from 5 kg to 5.000 kg) manufacturing and assembling small size steel constructions We are specialised in production of large-size pieces, in small series. Our main products: pump bodies, power frames, crankcases, gearboxes, bearing caps, covers, connecting rods, cross heads, machine beds, components for machine tools and compressors.

Gutekunst connecting parts GmbH is your specialist for standard parts and custom parts. In almost all materials we manufacture from small to large, from simple to complex. By default, we process all common plastics, steel and nonferrous metals. By an appropriate stockpiling we can respond to our customers' requests in individual cases quickly.

We are ISO 9001-2008 certified and manufacture complicated and precise turning parts of our capable CNC turning machines (with C axis, counter-spindle and Antriebbare tools) for renowned european companies. We shoot high-quality rotary parts in diameters from 10 mm to 280 mm for competitive prices of stainless steel (we have very big experience on the processing of this material) Brass, aluminum, plastic and various other alloys, exactly according to your drawings and supply you with timely short delivery times.

The company was founded in 1986 in ASEDO Dombühl We employ 120 highly motivated employees, mainly metal and electrical workers in two shifts. Our key business principles are: Use of resources by qualified and motivated employees for the benefit of our customers, as well as to our company The business concept is based on independent, responsible employees who get involved with fun at work and maintain a partnership, human interaction with each To maintain and expand through their own goal-oriented training and education continuity and quality Their top-quality products to manufacture. To achieve this, we pay attention since time immemorial in all areas on the consistent implementation of this principle. This supports our existing since 1995 certification in Quality Management, since 2001 according to DIN EN ISO 9001-2000

For more than 50 years, ALFRED TRONSER GMBH has specialized in the design and manufacture of variable capacitors for professional electronics. Today TRONSER offers the world's largest selection of Trimmer Capacitors high quality. Have this experience, combined with fully equipped research, development and measurement equipment up to 6 GHz, CAD / CAM for the design of components and production machinery, in-house production of parts on CNC machines, own electroplating as well as tool and fixture us the preferred partner made the world's major electronics companies, when it comes to trimmer capacitors. The plant near Stuttgart employs approximately 100 employees and the subsidiary TRONSER, INC.. in the state of New York, USA approximately 20 Since almost all components are produced in our company, the focus can be more and more on the quality control, starting with an incoming control of raw materials, statistical process control during production to complete final inspection of each capacitor produced. The order processing as well as production planning is controlled by the latest computer technology. As a medium-sized family business operated TRONSER customers in more than 45 countries with high-quality trimmer capacitors, reasonable prices, short delivery time and good service.

"Do not go - there's not!" True to this motto Budack is worked from the beginning in the locksmith. Heinz Budack, master of general machine, bought in 1977 in a forest Locksmith and started his own business. On their own land was cultivated and a workshop with drill - rotary, - set up milling and grinding machines. The production at this time consisted largely of small orders in the area of machining. In 1983, his wife worked with in the company and supported her husband actively in productive work. With the turn changed the order situation, Heinz Budack did not give up, but took on the challenge. Never before had so many fences and gates made. Every door, every fence is unique, speaks for quality work, and so the customers do not stay out. In the small workshop, production could not be realized in the long term, so Heinz Budack built in the years 1995/96, in the industrial area south forestry a new production hall. In October 1996, the new production was over 3000 square meters with 10 employees, including his wife and son Matthias are added. Locksmiths and locking technology in addition angeboten.1999 as a service also has son Matthias completed his training and qualification for the "champion metal worker trade" and thus ensures that even in the next generation of Locksmith Budack the traditional production continues. On 31.12.2008 it was time, symbolic of the company key was handed over to his son Matthias Budack, which is now successfully lead the family in the future.

Machined parts from Ø 10 to Ø 80 mm on single spindle automatic lathes Small and medium batch production Machining on numerically controlled lathes and machining centres from Ø 10 to Ø 300 mm Screws and bolts to specifications Machining of wrought and cast iron

Turned parts. Precison and quality for all industrial sectors.

The company Frentech Aerospace sro, now one hundred percent in the Czech owned, was founded in 1994 to be with the aim to become a qualified and competitive suppliers in the field of precision engineering. Initially, the products were targeted in the field of medical technology, microelectronics and special machines, including the delivery of spare parts.

Since 1952 WSK "PZL- Kalisz" S.A. has been representing Polish aircraft industry and manufacturing aircraft piston ASz-62IR and AI- 14R engines. They are designed to power the following airplanes: An-2 and M-18 “Dromader" (ASz-62IR) and respectively PZL-101 “Gawron” and PZL-104 “Wilga” (AI-14R). These engine types have been worldwide recognized for their quality and awarded numerous quality certificates issued in the USA, Canada, Brazil, People’s Republic of China. They have been produced in thousands and have proved failure free thus clearly evidencing their highest reliability and performance quality. WSK “PZL-Kalisz” S.A. also overhauls and performs repairs of ASz-62IR and AI-14R engines. In addition, the Company manufactures and repairs assemblies and parts of TWD-10B engine for An-28 aircraft. WSK “PZL-Kalisz” is a joint-stock company (own capital is 85 mln PLN and paid-up capital is 45,86 mln PLN) operating on the basis of the Commercial Company Code. Principal shareholders of the Company are as follows: - Industrial Development Agency 75,45% - Company employees 11,59% - SEMA Sp z o.o. 6,25% - the City of Kalisz 1.35% - Energy Plant "Energa S.A." 1,20% - Other shareholders 4,16% WSK “PZL-Kalisz” is a capital group composed of the mother company and its 2 fully-controlled subsidiaries: - ZOT “NARZĘDZIOWNIA WSK” Ltd. - PPUH „MECHANIK” Ltd. WSK „PZL-Kalisz” S.A. is the company of the essential importance for the Polish economy and is considered as part of the Polish Defence Industry Potential. As a result of the Company's restructuring process WSK "PZL- Kalisz" S.A. has extended its business into wide range of manufacturing programs and servicing activities including production of high pressure engine parts, oil pumps, gears, aircraft screw gears, turbochargers, push rods, pump housings and first of all crankshafts for high pressure engines. All these components require high precision machining in performing special requirements of its customers. WSK "PZL-Kalisz" S.A. maintains business relationship with well-renowed companies such as: General Electric Transportation Systems, Allison Transmission, Turbomeca, Sulzer Textil Switzerland, Pratt & Whitney Kalisz, and many others. Part of the Company production is designated for military aviation. The Company aim and priority is focused on meeting the Customer’s requirements that can be with WSK "PZL-Kalisz" capacities. WSK “PZL-Kalisz” S.A. acquired modern machinery operated by highly qualified and experienced technical staff. The Company continuously seeks new Customers and Suppliers especially in the manufacturing of precise and aviation components requiring high precision processing. Interested partners are always welcome. In 1999 the Company was awarded ISO 9001-2000 Certificate. In 2000 the Company was granted PART-145 Certificate. The following year – 2001, the Company attained PART-21G Certificate. In 2002 the Company was awarded AQAP-2110 Certificate. In 2004 WSK “PZL-Kalisz” S.A. was granted a license by The Polish Ministry of Internal Affairs and Administration for manufacturing and trading products and equipment for military and police force application as well as transfer of technologies. In 2009 the Company was awarded AS 9100 Certificate.

Specialist in turned parts with diameters ranging from 8 to 100 mm with mono and multispindle machines (automatic and CNC) as well as broching and gear cuting,grinding heat and surface treatement.

Metal furniture production for Medicine industry, Subcontracting jobs in Sheet metal production from Stainless steel and Zn coated materials, cooperation with building companies in Aluminum facade’s, glazed PVC, Al and Mild steel constructions. Non standart Sheet metal production and Metal furniture – small quantities, special sizes, shapes and colors, everything according to customer request. Starting from engineering and drawing up to ready product. Our main advantage is European quality product made by modern technologies still keeping competitive subcontracting or end customer price level.

Our activity consists in chip-forming machining on behalf of third parties for the automotive sector; the company has been active for over 30 years with about 20 employees. Our company counts on a robust machines fleet and our activities are primarily based on some automotive customers. The company performs work on aluminum castings, bar turning, but in general we are able to realize everything that can be worked through CNC Working Centers, Lathes, Transfer . We also perform mechanical assembly through presses and special machines. We are able to industrialize a product starting from the customers drawings - we develop and realize the necessary equipment for work and quality control - we choose the tools and create programs for CNC machines using CAD / CAM - in general we are able to provide the best and most complete service to the customer to fully meet his needs. Everything according to the quality regulations ISO9001: 2008, ISO / TS 16949:2009

Tecnospazio is specialized in the production of components for gas turbines, steam turbines and centrifugal compressors. We are equipped with 5-axis milling machines to produce components with complex geometry such as impellers, blisks and stator ring. In addition, we produce casing for turbine and gearboxes, especially with a 5-axis milling machine DIXI in temperature controlled environment. Tecnospazio is equipped with vertical lathes and milling machines that allow us to work up to a diameter of 2500 mm. For over 10 years we work titanium and nickel alloys such as Inconel, Nimonic and Waspalloy. Tecnospazio is organized to respond quickly to customer needs, therefore, all CNC machines run only programs processed with NX CAM and tested with machine simulator VERICUT. We certify our products in metrology laboratory equipped with Zeiss Prismo Super Accuracy.

The floor GmbH is a medium-sized company with over 50 years of tradition. It was founded in 1953 by master craftsman William Stehle, whose son Helmut floor has continued it. Meanwhile, Karl-Heinz trick (on the left) joined the company and took over the management. Marco Stehle (right), the grandson of the founder, took over the quality management. They are together since 2002, the company, which has developed very well in recent years, shareholders. So good that they decided in 2006 to relocate the emerging operation of Haslach to the nearby fishing creek. At the new location, the company has moved into a modern corporate building that provides enough space for upcoming enhancements reserves. Here is a further extension is created with pure production area, so that a production area of over 2000 square meters is available. We are appreciated as a reliable A-suppliers in the automotive industry. As to ISO TS 16949:2002 certified company, we meet the highest standards in quality management.