The technical capabilities of the WP hydraulic cutting technology: • Water jet cutting in 2-D (Including systems with up to 6000 bar and angle correction) • Water jet cutting in 3-D • Prototype • Custom • Design and construction of devices • Preparation and processing of CAD data What materials we can edit? • Rubber profiles • Plastics • Foam • foam rubber • Aluminium • Steel • Stainless steel • Titanium • Copper • CFRP • GRP • Marble • Stone • Acrylic • Glass • Special materials • and much more What are the advantages of water jet cutting? • Materials can, in contrast to all other separation methods to a thickness of 100 - 150 mm are processed • Cost-effective low-volume or prototype production • Economical separation process (no tool change, simple devices, no clamping devices) • Low program creation time • Cold cutting process (no thermal and chemical changes / change in the microstructure of the material, thus no material distortion) • Multiple operations (suchAs notches, holes, figure and contour) can be cut in one step • Scratch-free processing of the surface • No generation of toxic gases or vapors • no development of dust, chips or smoke • environmentally friendly separation methods (the use of natural substances such as water and sand) • high precision • No part warpage (except where appropriate material residual stress) • Processing option for (almost) all materials (even wrmeleitende or reflective materials) • Good cutting ability for composite and fiber-reinforced materials, suchB. sandwich materials such as CFRP or GFRP • No deformation of the material by pressure in the cutting area (only one cutting pressure of approximately 40 N on the workpiece) • No violation of the material surface (no hairline cracks in the cutting area) • Complex shapes are cut with high precision • clean cut edges without fraying and only with minimal burr • Filigree cut designs with fine contours and minimum bridge widths are technically feasible • Low material loss and waste (less kerf and optimizing material utilization) • Small cutting gap (in clean water 0.06 to 0.3 mm, using abrasive from 0.76 to 1.2 mm) • Cutting of any possibility, even complex contours and shapes, sharp angles, oblique cut edges and small inner radii • cutting ability in all directions • section may use or end at any point of the workpiece What speaks for the WP Hydroschneide technology

H7/h6 OÜ is an Estonian precision engineering company producing precision-machined components from a wide and diverse range of materials.

Welcome to the UF Industries GbR. For more than 20 years, we have been bundling the necessary skills for everything to do with drawing parts in a separate department. Our employees advise and support you in the procurement of tailor-made special and drawing parts and produce high-quality and precise turned, milled and combination parts for you according to drawings - even in demanding geometries and in small batch sizes. Quality and function are our top priority. In order to achieve this, we are constantly developing ourselves and our portfolio. True to the motto: If you stop getting better, you stop being good! Our aim is to be able to offer an efficient and optimal solution for every specific, mechanical-technical requirement based on a drawing or sample. If required, we offer you fast and goal-oriented support in the realization of your constructions. Especially in the project phase, it is of crucial importance to choose the best, most modern and at the same time most cost-effective production technology. We would also be happy to optimize existing construction parts together with you.

You expect precision and imagination in the machining of metals? Then you are exactly right with us. We offer a variety of solutions for metal machining with lasers, for example, CNC cutting of steel, stainless steel, aluminum, brass and copper. Our knowledgeable staff will be happy to help and advise you at any time. Your team at Laser Works Ltd! CNC laser cutting: high precision The Laser Works GmbH is since 1995 profiled partner for the precise machining of metallic materials. For customers of metal and mechanical engineering, plant construction, steel construction, shopfitting and exhibition stand construction manufactures and supplies LWR metal blanks and components of the highest quality. All made in our laser cutting parts are characterized by high manufacturing precision, high cut edge quality and bright metallic-sectional areas (in chrome-nickel steels) - costly post-processing such as deburring or sectional area cleansing can thus be eliminated. The company's quality management system is certified according to DIN ISO 9002. Our product range includes single part production and series production in unlimited quantities up to a edit box size of 3000 x 1500 mm. The machines can process sheet metal thicknesses of: structural steel and high-strength steel up to 20 mm, high-alloy stainless steels up to 15 mm, aluminum alloys up to 8 mm galvanized sheets to 3 mm to 3 mm brass and copper on request. Blank processing of profiles up to 100 mm height are also available on request. Working with LWR LASER WORKS means to have a powerful full-service provider of a wide range of editing options. Our expertise lies in the following areas: conventional metal construction, welding work as TIG, MMA welding and oxyacetylene welding, cutting processing through water-cooled fine cuts and manufacture of milling and combustion parts. Core and specialty of our range is the use of laser technology.The CNC laser cutting offers in the field of metalworking invaluable benefits, because with minimal heat input is an extremely narrow cutting gap for mild steel and high-alloy steels, aluminum, brass, copper and plastics accessible. The reproducible precision (repeatability) is a guarantee of consistent and reliable precision and short processing times for large quantities. Very powerful programs in our home lead to the import of all graphic file formats and any fonts. The range of surface treatment by laser comprises the solid phase transformation, Laserumschmelzlegieren and laser cladding. Reliability in order processing is also very important in LWR LASER WORKS such as the production of specific products of the highest quality in a short time. Special order products are already shipped on the day after the order. Of these "just-in-time" - deliveries, the customer benefits, which is located in the pressure of ever shorter production processes. Catalog of services CNC laser cutting * Minimum heat supply * Narrow cutting gap * High repeatability * Structural steel, high alloy steels, ceramics, aluminum, brass, copper, plastic * Thicknesses up to 12 mm stainless steel, 15 mm mild steel * Generate any fonts * Import of all graphics - file formats Laser surface treatment * Solid phase transformation * Laserumschmelzlegieren * Laser cladding * Applications on components: Steel materials, titanium materials, bronze materials Everything from one source * Conventional metal * TIG...

According to your wishes we cut on a CNC - waterjet cutting machine any shape. As a template used sketches, drawings and samples as well as media. We work with the most modern methods of wet and dry cutting technology: high-precision, environmentally friendly Wet cutting with and without Abrasivzusatz on a CNC water jet cutting machine up to a material size of 2000 x 3000 mm. Dry cuts on a numerically controlled cutting machine with a cutting width up to 3000 mm. All materials from glass to rubber, plastics and centimeter thick steel and the hardest stone can be tailored exactly. Some applications: tool and machine parts, gaskets and inserts, body and vehicle parts, stair treads, free ornaments, etc. Materials and slices: Alu 100 mm Glass 40 mm Granite 80 mm Marble 80 mm Rubber 80 mm Plastics 60 mm Ceramic 100 mm Steel / metal 80 mm VA 80 mm

Welcome to Technical Service Gratkorn Your reliable partner for innovative maintenance solutions. With many years of expertise and experience, we are setting new standards in three specialized areas: Mechanical processing: In our ultra-modern processing center, we offer tailor-made solutions for the reconstruction and manufacture of defective components. Our flexibility in procuring spare parts and our innovative technology ensure precise results. Valve service: We offer comprehensive repairs for flaps, ball valves and safety valves. Through close cooperation with accredited partners, we ensure that your systems are repaired reliably and efficiently. Roll grinding: Our roll grinding service stands for precision and versatility. With cutting-edge technology and an experienced team, we optimize your production processes in the printing, paper and plastics industries. Our commitment to perfection is reflected in every project. At Technical Service Gratkorn, the focus is on people — our dedicated employees and our valued customers. Discover a world of technological innovation and first-class services with us. We are looking forward to working with you and earning your trust.

Our services: Precision and reliability are our criteria when manufacturing your components. We work with the latest milling technologies with integrated simulations and testing routines when creating CNC programs. With our 3 and 5-axis machines, we can cover production areas of 1000 x 800 x 720 mm and comply with tolerances down to micrometers. Our knowledge is based on years of experience with CAD & CAM data. Classic 3-axis processing through to simulated 5-axis machining enables us to implement your design data without errors. The direct transfer of data guarantees accurate and error-free production. Continuous quality assurance and testing is a matter of course for us. With our lathes, we produce precise and sophisticated turned parts individually and according to your specifications and drawings as individual parts, in small or medium-sized series — with short delivery times and consistently high quality. Materials such as steel, stainless steel, aluminum, plastic and brass are mainly processed. The turned parts are machined on the most modern CNC lathes from DMG and Weiler. We are also happy to carry out the subsequent surface treatment and complete assembly of the components for you. We produce parts up to 380 mm in diameter and a turning length of 510 mm. Continuous quality assurance and testing is a matter of course for us. CNC turning of small to medium-sized parts Construction based on sketch, drawing, pattern Custom-fit individual parts and entire assemblies Fast and reliable production Manufacture of complex workpieces Processing of various types of metal and plastic We produce welded components with uncompromising quality. From complex small parts to large assemblies, everything from our own hands. Rely on the know-how of professionals: CNC Technik Bayern stands for high precision in the production of welded parts. To achieve optimal results, we use various welding techniques: Depending on the requirements, we use: TIG welding MAG welding Stud or spot welding This results in optimal solutions of the highest quality in a short period of time.