The company was founded in 1949 by Hauke Walter Hauke sen. founded. The company has set itself the target to process all kinds of metal. Made of iron, steel, stainless steel, aluminum, copper and brass welding complicated constructions and pipe bending constructions are made. The material undergoes metal with us from the mechanical machining to surface treatment is a proven program. This production range assumes, of course highly qualified and motivated employees and a large, high-quality machinery. Our company philosophy, "quality at a very reasonable price" has proven itself for over 50 years. Our customers, who are party to all industries, come from all over Germany. Take a picture of us - look!

The company was established in 1981 and immediately took its place in the medium-light structural steel fabrication sector, standing out as subcontracting centre specialized in sheet metal processing. Today Metalplasma boasts a flexible organization, extremely dynamic and with high performance targeted at offering an outsourcing service to an increasing number of companies looking for reliable partners to obtain success on the market. Therefore, our work does not stop at the normal stages of the machining cycle (cutting, bending and welding) but continues with product integration (painting, assembly of hydraulic/electrical components, etc.) aimed at producing complete semi-finished products.

The success of our company is easy to explain: We inspire with convincing performance, uncompromising high quality, innovative solutions and individual service. We are only satisfied when our customers are too. This claim obliges all of our employees and suppliers. Yesterday, today and in the future.

“We are your certified metal and plastic processing company. Since 2001, we have been manufacturing every conceivable machine component, from prototypes to series production. These include, in particular, hard-to-machine and high-precision components in the 5-axis range. (Simultaneous) We are convinced that we can offer you attractive prices and delivery times.”

Our family is in the 4th Generation and has 2 legs. Technical marine equipment and sheet metal processing. Due to the marine equipment we are used to respond flexibly and quickly. Our manufacturing capabilities are: - Punches up to 80t - Tieftiehen up to 100t - Lasers (ST to 25mm; VA to 12 mm, aluminum up to 8 mm) - Edge- - Welding - Roberterschweißen - (Rice Roborics) - Own tool - Solder - Rivets - Trowalieren - Degreasing

We are a metal working company. Our production is in Poland. We can laser cutting, sawing, punching, drilling, welding and welding Powder coating. Hot dip galvanizing and plating are also possible.

GTS Gate To Steel GmbH is a German company based in Düsseldorf. We are based in the field of mechanical and plant engineering. Our subsidiary is located in Wuxi near Shanghai. We have been in our line of business in China since 2004. We know the market and business inside and out. Our customers are German companies that sell industrial equipment to China. We are not an intermediary! GTS produces itself in its own hall. GTS takes over the production of the local production portion in China for the customers. We manufacture both entire assemblies and individual parts - it only depends on the needs of our customers. Of course we can also take care of the transport to Europe and all related formalities. We stand for: German quality made in China Know-how protection Customary market prices On-time delivery Our highly qualified team in our own assembly hall, together with a proven network of sub-suppliers, form your extended arm in China. Together they realize your projects in your usual German quality. GTS offers you an all-round carefree package tailored to your requirements.

Stainless steel welded constructions

We are an owner-managed mechanical engineering company with a focus on steel and rolling mill technology and general mechanical engineering. HICO Stahl- und Walzwerktechnik GmbH was founded in 2009 as a result of many years of cooperation between an engineering office and a service provider for spare parts, repair and modernization of plants. Core services include the design of machines, production of spare and wear parts for production plants, and maintenance and repair work.

MACHINING AND ALL KINDS OF RAW MATERIALS BELONGING TO THIS BRANCH OF INDUSTRY, ALUMINUM, WOOD, PVC PROCESSING OF FINISHED MATERIALS, SEMI-FINISHED MATERIALS, SPARE PARTS, MACHINES, TOOLS AND MATERIALS USED IN ALL KINDS OF INDUSTRIES MANUFACTURING MACHINES, CUTTING AND DRILLING MACHINES

Schifflechner Maschinenbau GmbH - The Company We are pleased to introduce our company from the region Waging am See / Chiem Rupertigau! Development + construction, mechanical engineering, CNC machining, surface treatment and control technology are our strengths. Convince yourself of our range! Established in 1997 by the master metalworker Martin Posch and Christian Schifflechner, our company continuously developed into an innovative and highly equipped modern engineering plant. Today we distinguish ourselves by customer-specific complete solutions including application support, development, calculation and construction as well as single and series production to final assembly. With 15 qualified and motivated staff, we meet the high requirements of our partners in the fields of mechanical and plant engineering.As a supplier of well-known companies at home and abroad, we stand for precision and quality. Time delivery and cost control are of course for us. The construction of our new office and production building in Waging am See in 2005 provides us with optimal conditions in terms of equipment, order capacity and workflow. Our Services: • Development + Construction • Mechanical Engineering • Special machine • Plant construction (steel and stainless steel V2A and V4A) • CNC machining (CNC turning, CNC milling, CNC saws) • Powder coating • Sandblasting • Glass bead blasting • Sheet metal machining (CNC bending) • Surface treatment • service (installation) • Control technology References / Projects • Tool carriage for stamping plant Car for changing dies up to 20 tons • Roles / chain conveyors, 90 ° Umlenku

MAP. supplies the following products directly in their assembly: - Machine beds made of mineral casting (DUROPOL) - Weldments - Machine covers - Special cabinets - Switchboards - Mechan. Large parts up to 14 m and 50 to The development, calculation and construction takes place in house. MAP. manufactures with the latest laser machines, most modern welding equipment and welding robots complete system solutions from the machine bed of the machine casing up to the cabinet and control panel. On a total area of 20,000 m² are Großbohrwerke for workpieces up to 14,000 mm in length and weighing up to 60 tons available for editing. Your parts are painted or powder-coated in your desired color. We develop innovative solutions using the latest 3D CAD / CAM workstations. You determine the scope of delivery We cordially invite you to our website for a tour of our operation. Or get to know us in person during a visit in the Swabian Walked know an der Fils.

The J. van Walraven BV was founded in 1942 and is a privately held company. We develop, produce and distribute innovative fastening, fire protection and plumbing systems. Currently, the Walraven Group consists of the holding company and 18 other subsidiaries. Organization of the group Product systems Our range is clearly divided into three areas: BIS fastening systems And much more fixing materials for heating, ventilation and sanitary installations as well as for sprinkler pipes, air ducts, electrical cables, cable trays BIS Fire Protection Systems Solutions for fire resistant and smoke gas-tight sealing of pipe and cable penetrations. As well as fire protection certified support products. BIS Sanitary Systems Sanitary pretext frame for fixing of toilet bowls, urinals and washbasins. Special BIS Vario ®: Electric or mechanical height adjustment! Ultimately Sanitary Silicones and Sealants ... Distribution In Europe, and particularly in Germany Walraven has a huge market share in the attachment area.Walraven products are used by thousands of installation companies in Europe, America, Asia, Australia and the Middle East. Safe Connection Walraven is one of the founders and member of the 'European Quality Association for pipe mounting eV' (safe connection). The composite consisting of numerous major manufacturers of Pipe fixing market, has established comparable, transparent policies regarding the testing procedures of load values. Advantage for planners and craftsmen: a more reliable and easier planning. The 'Quality Association pipe fixing' was 2003 eV from the "RAL", the German Institute for Quality Assurance and Certification, recognized. Quality labeling J. van Walraven Holding BV is ISO 9001; 2000 certified Production After 71 years of experience in the production of pipe fastening systems, Walraven can look at a tool and machine park, which is located at the highest technical level, and thus allows absolutely competitive production processes.. Production includes cutting, shaping and cutting of sheet metal and metals. A fully automated rail manufacturing to galvanizing and automatic packaging. Bzgl. Metal Stamping: Here we have more than 30 different presses with different benefits (force values 45-130 tons and speed between 20 and 150 ejections per minute). Ultimately Walraven can look back with pride on its own and full grown continuously tool shop, so that developments always even, safe and fast can be implemented.

ZAKO bring ideas into form. ZAKO metal technology offers the entire range of sheet metal processing, from the board to complex assemblies, from single parts to large series. We stock and process sheets of various varieties and strengths. Perfect planning. Experienced designers and engineers create with impressive 3D design tailor-made solutions for your projects.Competent and creatively makes ZAKO ideas perfect products. We are customer focussed, flexible, fast and reliable. Technology that inspires. The latest CNC laser technology and a fully automated high bay warehouse are also in use as punching technology, press brakes, welding robots and innovative Entgrattechnik. All this guarantees the best possible quality and efficiency. ZAKO - before we finished. Tags Sheet metal, engineering, sheet metal work, sheet metal processing, metal, metal art, metal processing, metal processing, laser cutting, laser cutting, laser processing, laser technology, punching, punching, punching technique, deburring, deburring, bending, Bending, bending, bending technology, riveting, riveting, riveting, clinching, clinching, welding, welding, MIG, MAG, TIG, contract manufacturing, contract manufacturing, steel, stainless steel, aluminum, sheet steel,

Dear Ladies and Gentlemen, please allow me to introduce the company DW Special Parts in this way. We are a modern young rapidly growing company, customer-specific solutions in the field of  CAD - Service  Drawing evaluation  Project documentation  turning & milling parts  grinding & polishing technique  From individual parts to series specialized. Our strengths lie in the rapid and individual conception, design and implementation of turned and milled parts. We can respond very quickly to customer requests. We are proud to provide our customers always satisfied with highest quality, reliability and punctuality. We would be pleased to be invited to your calls and to take part in the competition. Sincerely yours Dennis Wiegand DW Special Parts Special Production

We are operating as laser dot GmbH since 1992 manufacturer of sheet metal components, welded assemblies and prototype manufacturer since 2004. Our technological process are: 2D/3D laser cutting, TIG, MAG, MIG manual and robotic welding, CNC bending, CNC turret turning, CNC 3-axis milling, CNC sawing, grinding, Glasperlenstrashlen,

Plant Engineering - Mechanical Engineering - Metal - Sheet Metal Fabrication - Machining Mechanical Lößl - reliable and competent so we want to be in the areas of Fertiungstechnik, welding and sheet metal work to the side. Our high performance and personal commitment we can assure optimal care and timely Autragsabwicklung you anytime. With our machinery and our skilled workforce, we are able to meet the high quality demands of our fast-moving times. Take advantage of the benefits such as: quick decision-making, expertise and highly motivated team at professionals.

The company Edel & Stahl GbR is a medium-sized metal company specializing in steel, stainless steel and aluminum processing in the following trades. • Metal • Steel construction • plant • Mechanical engineering • Vehicle construction • individual structures of steel, stainless steel and aluminum Our Master and welding workshop is certified according to DIN EN ISO 9001: 2008, DIN EN 1090 EXC 2 and DIN EN ISO 3834-3

We, as the company TBR Metall GmbH, are a medium-sized company that specializes in all forms of metalworking. We are a reliable supplier for both individual parts and series production, from design to welded assemblies.

We specialize in high-precision laser welding and the production of semi-finished metal components. Our advanced laser technology ensures exceptional accuracy and strength in every weld, meeting the rigorous demands of industrial applications. We work closely with manufacturers, providing custom welding solutions for series production and small-batch orders. From automotive to aerospace, our flexible services support a range of industries looking to optimize production with quality welding and assembly solutions. Our commitment to efficiency and excellence ensures that your components are delivered on time, up to spec, and ready for further processing. Partner with us to streamline your production process and achieve outstanding results with every project.