BERR Industry provides process equipment manufacturing and site services for commissioning. Our work includes design, as well as custom equipment for rehabilitation works or new processes. Also we have been manufacturing certain basic process equipment like coolers, heaters, filters, blowers, etc… For over 25 years, we have been serving a wide variety of industries ( especially for Oil&Gas Industry ) on projects that range from simple to complex. We strive to understand your operation to help us determine the best way to fix the problem, working within your time constraints. We also do a significant amount of machining of new products per the customer’s requests. Products that we have manufactured, include cooling tower, shell&tube exchangers, air and lube oil coolers, centrifugal pump housings, gear pump parts, screw pump parts, piston pumps, components from air conveying systems, heat recovery steam generators ( hrsg ), recuperators, silencers, filters, fogging systems, inconel shaft & fan, titanium parts and process equipment and frame-like weldments, just to name a few. Engineering Design & 3D Modelling Reverse Engineering & 3D Scanning Equipment for Cooling Systems Equipment for Heating Systems Reducing, Filtering and Metering Stations Chemical Storage Tanks General Process Equipments

Welding services in the areas of: -Pipeline construction -Steel construction -Plant engineering -Underground pipeline construction -Repairs -Hard orders (tanks) -Contract welding -Deposition welding -Assembly -Cut Manufacture of pipes and distributors The procedures -Wig (processes 141) -Mag (process 135) -Mig (process 131) -Cored wire process (136) -E-hand (process 111) materials -Steel -Stainless steel (CrNi) -Aluminum -Titanium -Cast

We currently have two in our sheet metal processing plant in Wörth Trumpf CO² laser systems, with which we can process thicknesses in the steel range of 1-25mm and in the stainless steel and aluminum range of 1-10mm. The working range of our systems is 3000*1500 mm. We can bend sheet metal parts on our press brake up to a length of 3000 mm and with a press force of max. 220 tons. We have a Rösler Trowalizing system to finish the components. All other surface treatments such as galvanizing, powder coating, etc. are carried out via our cooperation partners in this area, here we take over the complete administration for our customers as a service.

We produce individual sheet metal components up to finished assemblies according to your requirements. Design and development of individual parts and assemblies with testing of the technical manufacturing feasibility. Creation of production documents and drawings. Laser cutting of sheet metal with a thickness of 0.5mm to 25mm and up to a size of 3000mm x 1500mm with a very high accuracy. Laser cutting of tubes with a wall of up to 12 mm, an outside diameter of up to 400 mm and a maximum length of 3000 mm. Bending of sheet metal with a thickness of 0.1 mm to 10 mm, optionally also marking-free edging on request. Thread cutting (blind hole, right-hand and left-hand thread) M3-M16, reaming, attaching Ensat thread inserts. Welding with water-cooled impulse welding system for materials such as steel, stainless steel and aluminum with MIG/MAG or TIG welding processes. Grinding/deburring and rounding edges of CNC-cut laser, stamping and plasma parts up to a thickness of 63mm. Optical and tactile measurement of components up to a size of 400 mm (length) x 200 mm (width) x 200 mm (height) including measurement report.

Our professional quality and technological equipment make our company capable of producing both carbon steel products and stainless steel products. Our machinery without any claim to completeness: CAD programs, CNC edge benders, hydraulic and eccentric presses, automatic cutting machine for plates and long goods, simple machining technology, robot with robotic arm, welding machines for every welding process.

Industrial service provider with a focus on mechanical and electromechanical components and devices. Thin sheet metal laser cutting, punching, finishing, lathe, mill.

The Friedrich engineering company was founded in 1994 by Manfred Friedrich. We would like to introduce ourselves as an innovative and full service company in the field of precision engineering and special engineering. With modern machinery (CNC and conventional) and qualified staff, we are able to produce high-volume, small batch, single parts and assembly of modules and special machines according to customer requirements. As a supplier, we are in daily to new requirements and tasks.

We, the "Bootswerft Borssum GmbH & Co. KG", are certified according to EN 1090 - EXC 2 and manufacture supporting structures and welded constructions as individual parts or in series production according to drawings. With our certified partners, we have a well-coordinated and competent network of companies from different areas at our disposal, from which we can manufacture all components from steel profiles to flame, edged, turned or milled parts and hot-dip galvanizing or wet painting and powder coating.

BLESOMA GmbH is active in the following areas: Mechanical engineering: turning, milling, laser cutting, edging, shitting (MIG \ MAG \ WIG), drilling Electrical engineering: switch box construction, programming

Wir arbeiten weiterhin an der Zufriedenheit unserer Kunden mit unseren hochwertigen Laserschneidmaschinen und Faserlaserbeschriftungsmaschinen, UV-Druckern (UV-Druckern), kompletten Ersatzteilen, Laserglasröhren mit 6 Monaten Garantie, Linsen, Spiegeln und technischem Kundendienst Unterstützung, wie schon seit 20 Jahren. In unseren CNC-Laserschneidmaschinen bieten wir eine maximale Schneidkapazität von 3000 x 1500 bei 4000 W, mit einer Schneidkapazität von 22 mm bei Plattenblechen, 15 mm bei Edelstahlblechen und 12 mm bei Aluminiumblechen . Vorteile des Laserschneidens; • Effizientester Materialeinsatz in der Produktion. • Schnelles Schneiden in der Produktion, niedrige Kosten. • Produktion ohne Formen in kleinen Stückzahlen. • Kostenreduzierung bei minimaler Abfallquote. • Die Herstellung aus Blechmaterialien ist wirtschaftlicher als die spanende Bearbeitung. • Hohe Präzision (0,01 mm in allen Dimensionen) durch die stabile Konstruktion der Maschine und die moderne Bedien- und Messtechnik. • Es ermöglicht komplexe Laserschnitte von einfachen und Innen-Außenkonturen sowohl auf dünnen als auch auf dicken Blechen.

Our team consists of experienced staff Our company has implemented a TÜV-certified quality system for welding works in accordance with the requirements of the SIST EN ISO 3834-2 standard. The supervision of the implementation of the quality system of welding work and welding is carried out by the IWE welding engineer – welding coordinator and the production manager, who has also completed the specialization for the IWE welding engineer. In the company, we ensure that we procure high-quality input materials with appropriate certificates for production, perform control of input materials upon delivery, and ensure proper handling and traceability of input materials. The same applies to additional materials.. In accordance with the quality system, we carry out regular periodic inspections of welding and other equipment and calibration of measuring instruments at authorized organizations within the prescribed time limits. Visual, measurement and non-destructive tests are carried out in-house or in an authorized laboratory for non-destructive tests at SIJ Ravne Systems. After a successful final inspection, our products are properly packed to prevent damage during transport.

MAZ GmbH offers you a comprehensive all-round service in metal processing, from one piece to series production. The services of MAZ GmbH include cutting and forming, welding and mechanical processing. The connection with modern quality assurance, measuring, surface treatment and assembly results in an all-round service that enables stress-free order processing.

The SCHÖLDERLE Equipment and Materials Technology GmbH is a hardware and construction company, which has developed more than three decades a reliable supplier for the high-tech industry. Our clients are among the most well-known internationally leading system for laser technology applications and spectral analysis for the determination of metallic alloys. We manufacture, assemble and test components, assemblies and systems with the highest technical standards of quality and reliability. The SCHÖLDERLE GmbH is on the cutting edge of technology with CNC milling machines and lathes for complete machining and 5-axis controlled CNC milling centers. This is a wide range of machining of materials, given by non-ferrous metals on alloy steels up to the highly heat-resistant titanium-nickel alloys. We also have experience in the treatment of plastics and ceramics. A CAD-CAM system allows us to simulate the 5-sided machining. For all this, we can rely on suitably qualified and experienced staff, which is led by a proven management team. the company has been extended to a significant step by introducing a quality management system that meets the high demands of the aerospace industry requirements and successful in 2008 certified according to EN 9100th

Our company, MEGA Sp. z o. o. is an innovative design and manufacturing firm that was established in 1996. It has been developing dynamically in combination with the continuous improvement of products and services, achieved thanks to the perseverance and commitment of our qualified staff. We offer a full range of services for the cutting of structural steel, stainless steel and non-ferrous metals. We also work in the fields of: - cutting of sheets from stainless steel and carbon steel - bending of stainless and carbon steel sheets on press brakes. We use modern manufacturing systems for processing pipes and profiles thanks to laser cutting in 3D technology, which gives the possibility of obtaining various shapes, bent details and complicated structures. MEGA LASER ensures the highest quality of manufactured parts and the shortest order lead times.

COMMITTED TO QUALITY AKLAS was founded by brothers Burhan and Bunyamin Ocak, who began as site managers at a renowned industrial services company. With a deep-rooted entrepreneurial spirit, they founded their own company in Beverlo, on the border between Limburg and Antwerp, in 2007. Not only was a prefabricated house built there, but modern offices were also created. Our founders have incorporated their professional experience and dedication into the core of AKLAS, which has led to our reputation for excellence and customer focus.

Gresförder Laser Technology GmbH manufactures high-quality products that are currently available on the market. Since 1980 we offer our customers a first class service and help you achieve your goals. Our 27 years of experience and commitment to excellence have earned us a good name in the field of metal. The core competence of the Department of Metal is the design, manufacture and installation of stainless steel, metal and steel products. Running different projects allows us customer needs, to identify trends and technolgische progress early and this, respektivlich integrate according to our advice in the products. Our company distinguishes itself in the high quality segment: Custom made designer / private area, custom CNC-bent-sawn and recycling of stainless steel, brass, aluminum, steel. With us you get canopies, covers, handles, stairs, railings and doors exclusive advertising medium. Furthermore, we are engaged in contract manufacturing for industrial enterprises. Whether it's small or large series, is appreciated our reliability and fast response time. Very IMPORTANT to us is the consistent quality. Only those who can keep the quality is to exist at the present time also able on the market. Everything is possible in almost home Gresförder! For example, searching one that can provide you with turning and milling parts, no problem you ask us. You are looking for a company that your welding activities in wage work for you takes over, no problem you ask us You are looking for someone who will build a canopy and installed, no problem, they ask us to. You want to have what powdered or wet painted, and are currently not satisfied with your suppliers, no problem just ask at Gresförder. You want to get cut brass or other materials water jet where one asks? Of course at Gresförder As you can see, no matter what you are looking for, you can check the same in Gresförder, and they have one less problem! What we can not manufacture is done by our business partners, with the same care and quality as you would expect from the house of Gresförder. But in order that we can not just tell evidence, we have prepared some photos for you. So that you can see we do not just talk, but we keep our promises.

PTS is a mechanical engineering company that specializes in the areas of development and construction, assembly, mechanical processing, welding, ultrasonic cleaning and the in-house production of roof racks.

Industrial technology, mechanical engineering

The BLG srls manufactures steel wire-mesh grids in all geometrical forms and shapes for a wide range of shelvings end exhibitions stands for industry and trade. Production is mainly on bulk contract-basis as well as costom-made supplies. the Blg 's wire-grid products are directed to producers and suppliers of paint brushes, metal furniture, shelvings and exhibition stands to sales outlet of all kinds and sizes. Diameters used from 2 mm to 10 mm