Mey Maschinenbau Prien has been designing, producing and optimizing precision mechanical OEM products for a wide range of industries for more than 50 years. Our team of more than 200 employees will implement your ideas at our three facilities. Our headquarters are in Prien am Chiemsee, while our other production facilities are in Nyúl and Győr in Hungary. This allows us to achieve an optimum cost mix, optimize the manufacturing of your product and pass the potential savings straight on to you. We always strive to act personally, conscientiously and flexibly, whether we are working with our clients or amongst our colleagues. These values guide our way of working and the resulting quality is reflected in your products.

The company Willy Müller GmbH Co. can look back on almost 75 years of successful activity in mechanical and apparatus engineering, starting with a small workshop for wrought iron and welded constructions up to special constructions in the interaction of the production areas mechanical processing and sheet metal processing, e.g. combination torches, flaps , E-filter parts. Our focus: - Load suspension devices: Here the production from the standard crossbeam to the special lifting device for the Machine transport - Furnace construction: oil, gas and coal dust burners (also combined) and their components such as Standby lances, nozzles, swirl chambers (also in armored versions) etc. - Rail vehicles: supply parts for trams, subways and IC trains such as B. door bearings, door locks, striking plates, bolts of all kinds (also hardened and nickel-plated), fastening elements, housing covers, brackets, handlebars, tie rods and the like.vam (total volume approx. 1,000 different parts) - Expansion joints: metal expansion joints (preferably rectangular) of approx. 300 x 300 mm left. W. to compensators for DENOX systems with edge lengths greater than 20,000 mm in steel and stainless steel (also heat-resistant), max. Unit weight so far: approx. 33 t Companies like Mitsubishi Hitachi, Bilfinger, Siemens, EON, RWE trust as long-term customers the quality of our work. What started as a one-man operation in 1945 has developed into a company with 30 employees within two generations. We produce with a modern machine park and have a wide range of offers and so we can say with a little pride: "A strong team works miracles" and MADE IN GERMANY

Founded in 2003, we develop and manufacture customized machines and systems for a wide range of industries. As an owner-managed company with around 50 employees, we focus on holistic solutions and assist you from planning to commissioning - all from a single source. Starting at a batch size of 1. Our production and administration departments operate under one roof - for short distances and quick decisions. This structure not only enables us to have short decision-making paths and smooth communication, but also particularly close cooperation across all departments. Our machines, systems and products are used in a wide range of sectors - from the automotive industry to the plastics industry. Our service portfolio: Mechanical engineering: We have a comprehensive range of machinery, enabling us to carry out all production steps in-house from a single source. Special plant construction: From design to production to assembly, we realize tailor-made solutions and systems. Electrical and automation technology: We offer electrical planning, installation, software development and commissioning for a wide range of applications. Customized technologies: From paint and material supply systems to dosing systems - we offer you innovative and individual solutions.

Bottazzi Srl has been working in sheet metal, iron, stainless steel and aluminum processing for over 35 years, specializing in the home appliance and furniture industry. Production: from small batches to large series deliveries, including using a Kanban system. Since 2002, the company has renewed and maintained the UNI EN ISO 9001:2008 quality certification.

Our customers are offered everything they need within our group of companies, all in one basket: from development and project management via the production of tools for plastic and metal fabrication, through to manufacturing the parts. In this way we closely co-operate with our customers in developing functional structural plastic and metal components on the basis of the design, thereby achieving an optimum combination between plan, design, manufacture, and cost structure. The integrated possibilities have enabled us substantially to shorten the project run up to the point of series production. The systems Pro-engineer and Catia, available to our staff, permit the creation of structural components and tools, "in one casting" as it were. Injection Moulds Our staff in the individual manufacturing areas have state-of-the-art technologies and most up-to-date machines (such as 12-wire and 15-wire cavity sinking EDM machines) at their disposal. In producing moulds with a guaranteed number of shots, especially for the automobile industry and consumer electronics, our dictum is precision and quality. This holds true for injection moulds, diecasting, duroplastic, two-component, rotating, transfer and insert/outsert moulds, just as much as it does for two-colour moulds, combinations of hard and soft plastics, automatic wire leads, in-mould decoration, and precision gear wheels. Rapid tooling with the aid of our EOS metal sintering machine M250 Extended makes it possible to produce mould inserts for injection moulds and prototype tools within a very short time. Eighty moulding machines in Vienna and Hungary, with a clamping force of between 25 and 1,100 tons, offer all the possibilities of manufacturing moulded, thermosetting and duroplast, gas-injection moulded, two-component moulded, insert and outsert moulded, as well as in-mould decoration parts. Our machines are equipped with automatic robot systems, and automatic packaging lines complement the production line. Vienna: 3-shift operation / technical products and precision parts with a mould clamping force of up to 500 tons, Hungary: 4-shift operation / technical products and design parts with a mould clamping force of up to 1,100 tons. Your plastic parts are coated in three fully automated painting lines on a water-soluble basis (single-component or two-component coating). Your metal parts are electrostatically painted, from the smallest parts up to housing coatings for consumer electronics.

Innovation in sheet metal production Martech GmbH specializes in sheet metal parts and complex welded structures in chrome steel, aluminum and steel with certified welders according to SN EN 287-1 / 9606-2 / DIN 3834 with its own welding engineer Our own engineering has the most modern 3D CAD systems to efficiently process customer needs, our services range up to the strength calculations of the components. Small parts of a few millimeters and material thicknesses of 0.2 - 30mm up to large constructions of max. 6.3 tons - lot sizes from 1 to thousands Thanks to our modern machine park (automated combination machine TruMatic 7000, latest flat laser technology Trumpf FIBER 5040 6kW 4 x 2 m automatically connected to the sheet metal storage and a Bystronic water jet system 3 x 1.5 m) and our sheet metal storage with up to 1,200 tons of sheet metal (stainless steel, aluminum and Steel in all qualities) we guarantee the shortest delivery times. Many long-standing customers from all areas of industry, pharmaceuticals, medical, defense, aviation, food technology, machine and vehicle construction are convinced of our services, high quality and competitive prices. Processing options: - Flat laser 4x2m - Combined processing 3x1.5m - laser welding - bend up to 4m and 320 to - Profile milling machine up to 3.5m - 3D CAD systems - Press-in fixture HAEGER Laser engraving machine - water jet system - pre-assembly - assembly production - prototype construction - series production - Surface treatments with partner companies

In 1999 Crainox was founded with the aim of working only with stainless steel products. The strength of Crainox is the ability to manage complex carpentry projects and the various mechanical processes, including finishing. This ability allows us to be an all-round partner capable of offering a complete package of products and services in the various industrial fields in which stainless steel is used. From the small artisan company of the origins with 4 workers, today the company has 75 people in addition to a network of subcontractors, who work almost exclusively for us, which has about 20 people.

In 1877 the company was founded Uebele. Since then the company has grown steadily and today offers the complete program around the punching technique. We manufacture high sophisticated tools, high-precision fine blanked parts, stamping parts, bending parts, stamping and deep drawn parts and metal pressing parts. The assembly production and the production of small and large series are part of our extensive range of services. For our national and international customers, we manufacture complex parts on the following presses: - Deep drawing presses 400-4000 kN (table size up to: 2,000 x 1,300) - Automatic punching 400-6300 kN (table size up to: 3,000 x 1,500), - Fine blanking presses from 1,600 kN to 3,200 kN, - Pressing machine to Dm 900 x 5 mm - Press brakes up to 1,500 mm long Materials / Materials: Steel, stainless steel (1.4301 / 1.4571 / 4310, etc.) and non-ferrous metals such as aluminum, copper, bronze and brass, and substance capable plastics. Sheet thickness: 0.05 mm - 10.0 mm Coil: 300 mm x 10 mm and 1000 mm x 8 mm Product Line / products: Fastening systems for photovoltaic systems such as roof hooks, shielding, Cell connectors, mugs, fittings, spacers, flanges, housings, holders, sleeves, Contacts, discs, covers, clamps, braces, disc springs, angles and gears Toolmaking The following services offered by our professional expert toolmaking: - Project development to series production - Tool design - Prototype production - Construction of composite tools, drawing tools, stamping tools, bending tools, Fine-cut and cutting tools as well as devices Subsequent processing - Vibratory grinding, brush deburring, drums, tape loops with automatic feed - Heat treatment - all standard methods (inter-stage hardening, Nitriding, Hardening, and Nitrocarburizinga) Surface Finishing / Surface coating - Powder coating, KTL, painting - Electroplated coatings of Au to Zn / Ni (chrome plating, galvanizing, burnishing) Assembly production As a system supplier, we offer our customers from different industries all from a single source - from product development to the mounted assembly. - Inert gas welding (TIG / MIG / MAG) - Robot welding - Stud Welding - Spot and projection welding - Pressure joining (Clinching / clinching) - Riveting, caulking, gluing

CASTING and FORGING PARTS BY CUSTOMER Together with our partner companies ISG industry service and Geiger Berger Industries, we offer you the opportunity to access from a wide range of different foundries, forging and machining company from Germany, Spain, Hungary and China. We take care of you this vendor selection, request, technical clarification, quality assurance, packaging, shipping and timely delivery of your products according to your drawings and specifications. Through our three locations in Germany, we are always in their vicinity: CFT Hanseatic Guss GmbH, 28195 Bremen ISG industry service Geiger e.Kfm., 73491 Neuler Berger Industries K., 50668 Cologne You have a question or want to get to know us? Please contact one of the below mentioned contact, we'll take care of everything else.

Welcome to EFI CNC Machining & Mould Making - your partner for precision manufacturing from Hanover! We understand the importance of precision and efficiency in the modern manufacturing industry. With our headquarters in Hanover, we are proud to be a leading mold manufacturing company that specializes, among other things, in contract manufacturing for turning and milling. Our strengths: 1. Precision work: With state-of-the-art CNC machines and an experienced team of specialists, we offer precision turning and milling work at the highest level. Every product that leaves our factory floors meets the strictest quality standards. 2. Versatility: Regardless of whether it is custom-made or large series, we adapt flexibly to the requirements of our customers. Our manufacturing capabilities enable us to process a wide range of materials and levels of complexity. 3. Experience and know-how: With years of experience in the industry, our team has the necessary expertise to successfully implement even the most demanding projects. Our services: 1. CNC turning: Precise turning of small to large workpieces max. Ø340. 2. CNC milling: Efficient milling with 3-axis and 5-axis milling machines with maximum accuracy. 3. Quality control: Every manufactured part goes through our quality controls to ensure that it meets the requirements and expectations of our customers. Customer satisfaction is our top priority. Our goal is not only to deliver high-quality products, but also to build long-term partnerships with our customers. We place great value on open communication, reliability and timely deliveries.

Special machine for Wagner: Everything does not exist! We live innovation and look forward each time on new challenges! Whether targeted conversion of trucks, whether trailers, industrial plant or special solutions for your needs - Wagner Special machine puts your desires to professionally! Mechanics, hydraulics, electronics - we have the professionals at work We analyze the present problems and develop inter-plant solutions! In Wagner the planning and implementation of electronic, hydraulic and mechanical components are. So that we can surprise you with our solutions. Over and over again. Produced entirely in Germany We guarantee our machines! For that reason, we never use on purchases from abroad. We build your products completely in our own workshop. Whether special size or special solution - where it says Wagner Wagner is also in there. And only Wagner!

The company Wöhler Bohemia s.r.o. was founded in 1994 as a subsidiary of the German company Wöhler, whose history dates back to 1932. We are its exclusive sales and service representative for the Czech and Slovak Republics. For more than 90 years, the Wöhler name has been synonymous with quality and innovation in the field of measuring and inspection technology, technical brushes and single-purpose machines for the production of paint rollers and brushes.

Welcome to MV Blechbearbeitung ! In the north of germany we are Your reliable partner for laser cutting ( sheets an tubes ), punching and bending, Milling and Welding up to ready-to-use constructions. The welding workshop with its high levelled qualifications will meet Your requirements - certified acc. ISO 1090 EXC 3 for steel, stainless steel as well as aluminium. MAG, WIG manual welding, laser welding upto 5 mm, robotic welding up to 500 kg piece weight at highest quality level.

We bring metal into shape! Your specialist for metalworking & production of complete assemblies About us: We face many different challenges every day. Our range of services ranges from classic sheet metal processing to the production of complex components and assemblies as well as the production of individual components. Custom-made products and individual solutions round off our capabilities. Whether you are a craftsman or a bulk buyer – thanks to our versatility, we are able to meet everything according to customer requirements.

1872 from an idea a reality. With the production of locks, Africa godfather and machetes, the company founder Heinrich Schmidt took the plunge into self-employment. The company produced for the domestic needs and for export to the whole world. The delivery was carried out under its own and also under the trademark of exporters. 1925, the mainstay of Agricultural Engineering was established. In particular, agricultural wear parts have been made for tillage. These were among other things, grubbing shares, cutting blades, angle coulters, ridging etc. of the leading manufacturers of agricultural machinery. In the whole of Germany and western Europe were and are these products their application. Since the 60s, the range has been expanded by the introduction of the Sheet Metal and processing and the production of animal traps of all kinds. The pressing, stamping, punching and bending parts are produced mainly according to customers drawings and samples and finished or coated as desired. Our forward-looking machinery is constantly being improved by new machines. The guarantees with experienced and trained personnel for highest precision and quality in the entire manufacturing spectrum. Through our research and development department, the products of a design verification are subjected. Here, the product or the working process is developed as needed. In August 2008, we have our machinery increased by 2 other press lines. Press forces up to 400 tons. and a material width up to 500 mm are no problem now. This also sets with up to 100,000 pcs delivery lot can now be made efficiently.

Saku Metall Allhanke Tehas AS provides subcontracting services, specializing in the manufacturing of sheet metal assemblies with integrated technologies based on customers' drawings and requirements. With all key production processes handled in-house, we help manufacturers enhance supply chain efficiency by reducing delivery times and minimizing quality risks. Our in-house production processes include development, cutting, bending, welding, painting, and assembly, ensuring a seamless and reliable manufacturing experience tailored to your needs.

Laser cutting sheet metal and profiles, welding work, steel, stainless steel, aluminium