MotorRevo GmbH

MotorRevo GmbH

DEGermany, 49201 Dissen am Teutoburger Wald
MotorRevo GmbH logo

Overview

About MotorRevo GmbH

Who we are

We are your partner for the development and manufacture of technical components. From design and prototype through to series production, we support your project at every stage. Our range covers turned and milled parts, ground and EDM parts, laser-cut and sheet metal parts, stamped and bent parts, gears and ready-to-install assemblies. We process steel, stainless steel, aluminium, brass, copper, titanium and engineering plastics, from single parts to large series. Prototypes and samples are produced at short notice. Series parts are typically delivered within four to eight weeks. Every enquiry is handled by a dedicated contact person. You receive a well-founded response and a binding quotation promptly. In the automotive sector, we develop components entirely in-house, from the initial idea to series maturity. This gives us the experience your development project needs. Management: Marvin Kobus and Simon Besheimer, Managing Directors Send us your enquiry or drawing: fertigung@motorrevo.com
1 / 8
2 / 8
3 / 8
4 / 8
5 / 8
6 / 8
7 / 8
8 / 8
Dissen am Teutoburger Wald, Germany
Member since 2026
Employees20 - 50
Turnover< 1 Mil.
Year of foundation2023

Competencies

Technologies

Turning

TechnologiesLotsizeLengthWidthHeightDiameterWeight
Turning
1–100 k1–2,000 mm——1–600 mm—
Automatic turning (bar)
1–100 k1–500 mm——1–80 mm—
Swiss turning
1–100 k1–500 mm——1–40 mm—
Full-range turning (including milling)
1–100 k1–2,000 mm——1–600 mm—
Hard turning
1–100 k1–2,000 mm——1–600 mm—
Broaching
1–100 k1–2,000 mm——1–600 mm—
Deep-hole drilling
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm0–500 kg
Centering / end facing
1–100 k1–2,000 mm——1–600 mm—
Shaft machining
1–100 k1–2,000 mm——1–600 mm0–500 kg

Sheet Metal Processing

TechnologiesLotsizeLengthWidthHeightWeightMaterial thickness
Laser cutting 2D
1–100 k1–3,000 mm1–1,500 mm——1–20 mm
Laser cutting 3D
1–100 k1–3,000 mm1–1,500 mm1–2,000 mm0–500 kg1–20 mm
Bending / folding
1–100 k1–3,000 mm———1–20 mm
Punching / nibbling
1–100 k1–3,000 mm1–1,500 mm——1–20 mm
Combined forming laser cutting / punching
1–100 k1–3,000 mm1–1,500 mm——1–20 mm
Laser cutting, tube & section
1–100 k1–3,000 mm1–1,500 mm1–2,000 mm—1–20 mm
Oxyacetylene cutting
1–100 k1–3,000 mm1–1,500 mm—0–500 kg1–50 mm
Plasma fusion cutting
1–100 k1–3,000 mm1–1,500 mm—0–500 kg1–50 mm
Plate rolling / bending
1–100 k—1–1,500 mm——1–20 mm
Plate straightening
1–100 k—1–1,500 mm——1–20 mm
Shearing (rectangular blank/strip)
1–100 k————1–20 mm

Sheet Metal Forming (Stamping, Deep-drawing)

TechnologiesLotsizeLengthWidthHeightDiameterMaterial thickness
Punching / pressing (Out-of-tool)
1–100 k1–3,000 mm1–1,500 mm——1–20 mm
Stamping and bending machine (Bihler)
1–100 k1–3,000 mm1–1,500 mm——1–20 mm
Deep-drawing
1–100 k1–3,000 mm1–1,500 mm1–2,000 mm—1–20 mm
Fineblanking / pressing
1–100 k1–3,000 mm1–1,500 mm———
Spinning
1–100 k———1–600 mm1–20 mm
Roll forming
1–100 k1–3,000 mm1–1,500 mm——1–20 mm
Plate rolling / bending
1–100 k—1–1,500 mm——1–20 mm

Gear Making

TechnologiesLotsizeLengthWidthHeightDiameterWeight
Cylindrical gear / spur gear
1–100 k1–2,000 mm——1–600 mm—
Internal teeth
1–100 k1–2,000 mm——1–600 mm0–500 kg
Bevel gear wheel
1–100 k1–2,000 mm——1–600 mm0–500 kg
Sprocket (wheel)
1–100 k1–2,000 mm——1–600 mm0–500 kg
Cogged belt pulley
1–100 k1–2,000 mm——1–600 mm0–500 kg
Rack (toothed)
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm0–500 kg
Worm gear
1–100 k1–2,000 mm——1–600 mm0–500 kg

Finishing

TechnologiesLotsizeLengthWidthHeightDiameterWeightMaterial thickness
External cylindrical grinding
1–100 k1–2,000 mm——1–600 mm——
Internal cylindrical grinding
1–100 k1–2,000 mm——1–600 mm——
Centreless grinding
1–100 k1–2,000 mm——1–600 mm0–500 kg—
Circular honing - internal
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm0–500 kg—
Circular honing - external
1–100 k1–2,000 mm——1–600 mm0–500 kg—
Roller finishing internal
1–100 k1–2,000 mm——1–600 mm0–500 kg—
Roller finishing external
1–100 k1–2,000 mm——1–600 mm0–500 kg—
Belt grinding
1–100 k—1–2,000 mm———1–50 mm
Precision honing
1–100 k1–2,000 mm——1–600 mm——
Surface grinding machine
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm—0–500 kg—
Coordinate jig grinding
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm—0–500 kg—
Shot blasting
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm—0–500 kg—
Surface lapping
1–100 k1–2,000 mm——1–600 mm——
Profile grinding
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm——
Rotofinishing, barrel finishing
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm———
Non-circular / crankshaft grinding
1–100 k1–2,000 mm———0–500 kg—

Etching and Spark Erosion

TechnologiesLotsizeLengthWidthHeightDiameterWeight
Spark erosion wire cutting
1–100 k1–600 mm1–600 mm1–600 mm—0–500 kg
Spark erosion countersinking
1–100 k1–600 mm1–600 mm1–600 mm—0–500 kg
Chemical deburring
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm——
Thermal deburring
1–100 k1–2,000 mm——1–600 mm0–500 kg
Electrochemical machining (ECM)
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm—0–500 kg

Surface Treatment

TechnologiesLotsizeLengthWidthHeightDiameterWeightMaterial thickness
Anodizing
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm—0–500 kg—
Surfacing / build-up welding
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm0–500 kg1–50 mm
Pickling
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm—0–500 kg—
Blacking
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm—0–500 kg—
Chromatizing
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm—0–500 kg—
Electropolishing
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm———
Electric dip-coat painting
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm—0–500 kg—
Molten metal immersion
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm—0–500 kg—
Phosphatizing
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm—0–500 kg—
Powder coating
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm—0–500 kg—
Rotofinishing, barrel finishing
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm———
Parts cleaning/degreasing
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm—0–500 kg—
Sand blasting
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm—0–500 kg—
Spray-painting
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm—0–500 kg—
Nickel plating
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm—0–500 kg—
Galvanizing
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm0–500 kg1–50 mm

Machining (Extruded Profiles)

TechnologiesLotsizeLengthWidthHeightDiameterWeight
Machining of extruded sections
1–100 k—1–2,000 mm1–2,000 mm—0–500 kg
Bar extrusion
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm—

Sintering & Powder Pressing

TechnologiesLotsizeLengthWidthHeightDiameterWeight
Sintering
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm0–500 kg

Cutting dies / deep drawing dies

TechnologiesLengthWidthHeightWeight
Punching / Cutting tools
1–2,000 mm1–2,000 mm1–2,000 mm0–500 kg
Follow-on composite tools
1–2,000 mm1–2,000 mm1–2,000 mm0–500 kg
Fineblanking tools
1–2,000 mm1–2,000 mm1–2,000 mm0–500 kg
Deep-drawing dies
1–2,000 mm1–2,000 mm1–2,000 mm0–500 kg
Trimming
1–2,000 mm1–2,000 mm1–2,000 mm0–500 kg
Die replacement / wearing part manufacturing
————
Impact extrusion dies
1–2,000 mm1–2,000 mm1–2,000 mm0–500 kg
Embossing / swage dies
1–2,000 mm1–2,000 mm1–2,000 mm0–500 kg
Rod extrusion dies
1–2,000 mm1–2,000 mm1–2,000 mm0–500 kg

Jigmaking

TechnologiesLengthWidthHeightWeight
Drilling / milling jigs
1–2,000 mm1–2,000 mm1–2,000 mm0–500 kg
Gauges
1–2,000 mm1–2,000 mm1–2,000 mm0–500 kg
Measuring / testing jigs
1–2,000 mm1–2,000 mm1–2,000 mm0–500 kg
Assembly jigs
1–2,000 mm1–2,000 mm1–2,000 mm0–500 kg
Welding jigs
1–2,000 mm1–2,000 mm1–2,000 mm0–500 kg
Clamping devices
1–2,000 mm1–2,000 mm1–2,000 mm0–500 kg

Threading

TechnologiesLotsizeLengthDiameterWeight
Thread rolling
1–100 k1–2,000 mm1–600 mm—
Thread grinding
1–100 k1–2,000 mm1–600 mm0–500 kg
Thread whirling
1–100 k1–2,000 mm1–600 mm0–500 kg
Worm milling
1–100 k1–2,000 mm1–600 mm0–500 kg
Worm rolling
1–100 k1–2,000 mm1–600 mm—
Worm grinding
1–100 k1–2,000 mm1–600 mm0–500 kg

Welding

TechnologiesLotsizeLengthWidthHeightDiameterWeightMaterial thickness
Inert gas shielded arc welding (MIG/MAG)
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm—0–500 kg—
Inert gas shielded arc welding (Plasma)
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm0–500 kg1–50 mm
Inert gas shielded arc welding (TIG)
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm—0–500 kg—
Laser-beam welding
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm0–500 kg—
Robot welding
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm—0–500 kg—
Spot welding
1–100 k—————1–20 mm
Manual electrode welding
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm0–500 kg1–50 mm
Ultrasonic welding
1–100 k1–2,000 mm1–2,000 mm———1–20 mm
Stud welding
1–100 k——————
Projection welding
1–100 k—————1–20 mm
Soldering
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm0–500 kg—
Friction welding
1–100 k1–2,000 mm—————

Welded constructions / Structural Steelwork

TechnologiesLotsizeLengthWidthHeightWeight
Welded constructions (weldments)
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm0–500 kg
Machine frames / bases / racks
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm0–500 kg

Cutting (plastics)

TechnologiesLotsizeLengthWidthHeightWeightMaterial thickness
Laser cutting 2D
1–100 k1–2,000 mm1–2,000 mm——1–20 mm
Laser cutting 3D
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm0–500 kg1–20 mm
Laser cutting, tube & section
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm—1–20 mm

Machining (Plastics & Rubber)

TechnologiesLotsizeLengthWidthHeightDiameter
Turning
1–100 k1–2,000 mm——1–600 mm
Automatic turning (bar)
1–100 k1–500 mm——1–80 mm
Full-range turning (including milling)
1–100 k1–2,000 mm——1–600 mm
Milling
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm—
Form milling (3 D)
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm—

Heat Treatment

TechnologiesLotsizeLengthWidthHeightDiameterWeight
Carbonitriding
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm0–500 kg
Case hardening/surface hardening
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm0–500 kg
Flame-hardening
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm0–500 kg
Annealing
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm0–500 kg
Hardening
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm0–500 kg
Induction hardening
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm0–500 kg
Nitriding processes
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm0–500 kg
Vacuum annealing
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm0–500 kg
Hardening and tempering
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm0–500 kg

Wire & Spring Bending

TechnologiesLotsizeDiameter
Wire bending
1–100 k1–600 mm
Spring bending
1–100 k1–600 mm

Pipe & Tube Manufacturing

TechnologiesLotsizeLengthWidthHeightDiameterMaterial thickness
Pipe bending
1–100 k1–2,000 mm——1–600 mm1–20 mm
Pipe forming
1–100 k1–2,000 mm——1–600 mm—
Laser cutting, tube & section
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm—1–20 mm
Flange bending, profile bending
1–100 k—1–2,000 mm——1–20 mm
Plate rolling / bending
1–100 k—1–2,000 mm——1–20 mm
Rotary kneading / swaging (hollow section)
1–100 k1–2,000 mm——1–600 mm—

Assembly Group Manufacturing

TechnologiesLotsizeLengthWidthHeightDiameterWeightMaterial thickness
Clinching
1–100 k1–2,000 mm1–2,000 mm———1–20 mm
Folding
1–100 k—————1–20 mm
Adhesive bonding
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm0–500 kg1–20 mm
Riveting
1–100 k1–2,000 mm1–2,000 mm———1–20 mm
Shrinking / cold-stretching
1–100 k1–2,000 mm——1–600 mm0–500 kg—

Assembly

TechnologiesWeight
Mechanical assembly
0–500 kg

Measuring & Testing

TechnologiesLengthWidthHeightDiameterWeight
Measuring / testing
1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm0–500 kg

Injection Moulding, Extruding

TechnologiesLotsizeWidthHeight
Extrusion (profile)
1–100 k1–2,000 mm1–2,000 mm

Solid Forming

TechnologiesLotsizeLengthWidthHeightDiameterWeight
Bar extrusion
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm—
Ring rolling
1–100 k1–2,000 mm——1–600 mm0–500 kg
Rotary kneading / swaging (hollow section)
1–100 k1–2,000 mm——1–600 mm—
Rotary kneading / swaging (solid section)
1–100 k1–2,000 mm——1–600 mm—

Mould construction

TechnologiesLengthWidthHeightWeight
Modelmaking
1–2,000 mm1–2,000 mm1–2,000 mm0–500 kg
Squeeze moulds
1–2,000 mm1–2,000 mm1–2,000 mm0–500 kg
Forging dies
1–2,000 mm1–2,000 mm1–2,000 mm0–500 kg
Sintering
1–2,000 mm1–2,000 mm1–2,000 mm0–500 kg
Extrusion dies
1–2,000 mm1–2,000 mm1–2,000 mm0–500 kg

Milling

TechnologiesLotsizeLengthWidthHeightDiameterWeight
Milling
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm——
5-axis milling machines
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm——
Form milling (3 D)
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm——
Full-range milling (including turning)
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm—
HSC milling
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm—0–500 kg
Deep-hole drilling
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm0–500 kg
Engraver milling
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm0–500 kg

Joining (Plastics & Rubber)

TechnologiesLotsizeLengthWidthMaterial thickness
Ultrasonic welding
1–100 k1–2,000 mm1–2,000 mm1–20 mm

Drilling / Sawing

TechnologiesLotsizeLengthWidthHeightDiameterWeight
Deep-hole drilling
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm0–500 kg
Sawing
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm—
Drilling / threading / tapping
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm—0–500 kg

Labelling / marking

TechnologiesLotsizeLengthWidthHeightDiameterWeight
Engraver milling
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm0–500 kg
Laser marking / Laser inscription
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm—
Laser depth engraving
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm—
Marking
1–100 k1–2,000 mm1–2,000 mm1–2,000 mm1–600 mm—

Materials

Plastics/synthetic materials
ThermoplasticsHigh performance plastic
Sintered materials
Metal powder for formed parts
Heavy metals
Copper-zinc alloys (brass)Copper and copper alloys
Steel
Structural steelCase hardening/tempering steelStainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)Free-cutting/mild steelTool steelSpring steel
Light metals
Aluminium and aluminium alloysTitanium and titanium alloys

Industries

Mechanical engineeringDrive and gear engineeringAutomotive and vehicle constructionSpecial purpose machinery manufacturingBuilding, agricultural and forestry machinery manufacturingHydraulic and pneumatic industryPlant engineering and constructionApparatus engineeringFittings engineeringAutomation and control engineeringConstruction and architectural suppliesLighting industryMining and tunnel engineeringOffice machinery and suppliesChemical industryRailway and rail vehicles industryElectrical industryPower generation and transmission industryPrecision engineering, mechatronics and opticsHousehold appliance industryInformation technology (hardware)Air conditioning, refrigeration and ventilation industryBoiler, container and tank construction Aerospace and aviation industryMedical technologyMeasurement and control technique, laboratory equipmentFurniture industryPaper and printing machinery industryClean room technologyShipbuilding industryTelecommunication industryPackaging industryMachine tool manufacturing

Parts & Machines

Parts (9)

1 / 9
CNC-Drehteile Flansch
CNC-Drehteile Flansch
ComplexityMedium
DescriptionCNC-Drehteile in Serie. Technologie: Drehen. Werkstoff: Stahl/Edelstahl.
2 / 9
Zahnräder
Zahnräder
ComplexityMedium
DescriptionZahnräder aus der Serienfertigung. Technologie: Verzahnen (Wälzfräsen). Werkstoff: Stahl.
3 / 9
Präzisionsdrehteil Messing
Präzisionsdrehteil Messing
MaterialCopper-zinc alloys (brass)
ComplexityMedium
DescriptionPräzisionsdrehteil aus Messing, Haupt- und Gegenspindel. Technologie: Langdrehen. Werkstoff: Messing.
4 / 9
Dreh- und Frästeile (Teilespektrum)
Dreh- und Frästeile (Teilespektrum)
ComplexityMedium
DescriptionBeispiele aus unserem Teilespektrum: Dreh- und Frästeile aus Stahl, Aluminium, Messing und Kupfer. Technologie: Drehen, Fräsen.
5 / 9
Dreh-Fräs-Teil, Komplettbearbeitung
Dreh-Fräs-Teil, Komplettbearbeitung
ComplexityMedium
DescriptionKomplettbearbeitung auf Dreh-Fräs-Zentren. Technologie: Drehen mit Fräsbearbeitung (Komplettbearbeitung).
6 / 9
Gehärtete Welle, rundgeschliffen
Gehärtete Welle, rundgeschliffen
ComplexityMedium
DescriptionRundschleifen einer gehärteten Welle. Technologie: Außenrundschleifen.
7 / 9
Lagersitz, innenrundgeschliffen
Lagersitz, innenrundgeschliffen
ComplexityMedium
DescriptionInnenrundschleifen eines Lagersitzes. Technologie: Innenrundschleifen.
8 / 9
Schnittplatte, drahterodiert
Schnittplatte, drahterodiert
ComplexityMedium
DescriptionDrahterodieren einer Schnittplatte. Technologie: Drahterodieren.
9 / 9
Kettenrad 06B, Z25, gehärtet
Kettenrad 06B, Z25, gehärtet
TechnologySprocket (wheel)
MaterialCase hardening/tempering steel
Dimensions
Weight0.1 mm
Diameter80 mm
Length20 mm
ComplexityMedium
DescriptionKettenrad 06B, Z25, 42CrMo4, Zähne gehärtet. Serie mit 100 Stück je Variante.
9 Parts
Sprocket (wheel)1

Contact

Location

Main locationFeldstraße 2, 49201 Dissen am Teutoburger Wald, Germany
Google Maps
This map is hosted on Google Maps. See
privacy policy.

Company contact

Contact persons

SB
Simon Besheimer

Are you a supplier?
Find perfectly matching requests.

Register for free

Are you a buyer?
Submit your request.

Register for free