tooliss gmbh
Germany, 73660 Urbach
Overview
About tooliss gmbh
Who we are
tooliss gmbh is a globally operating technology company specializing in engineered plastic parts and castings. As a highly specialized engineering service provider, the company uses value analyses to develop solutions for their customers that are optimized in terms of technology and cost-effectiveness.
1 / 9
2 / 9
3 / 9
4 / 9
5 / 9
6 / 9
7 / 9
8 / 9
9 / 9
Urbach, Germany
Member since 2016
Year of foundation2005
Competencies
Technologies
Machining (Plastics & Rubber)
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight |
|---|---|---|---|---|---|---|
Turning | 500–1 M | 5–5,000 mm | — | — | 2–500 mm | — |
Automatic turning (bar) | 500–10 M | 5–3,000 mm | — | — | 2–500 mm | — |
Full-range turning (including milling) | 500–1 M | 1–10,000 mm | — | — | 1–10,000 mm | — |
Milling | 100–10,000 | 1–2,000 mm | 1–2,000 mm | 1–2,000 mm | — | 0–100 kg |
Form milling (3 D) | 100–100,000 | 1–1,000 mm | 1–1,000 mm | 1–1,000 mm | — | 0–50 kg |
Machining (Extruded Profiles)
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight |
|---|---|---|---|---|---|---|
Machining of extruded sections | — | — | 1–500 mm | 1–500 mm | — | 0–10,000 kg |
Bar extrusion | 300–1 M | 1–100,000 mm | 1–500 mm | 1–500 mm | 1–500 mm | — |
Injection Moulding, Extruding
| Technologies | Lotsize | Length | Width | Height | Weight |
|---|---|---|---|---|---|
Injection moulding | 100–5 M | 1–2,000 mm | 1–2,000 mm | 1–2,500 mm | 0–50 kg |
Extrusion (profile) | 300–10 M | — | 1–500 mm | 1–500 mm | — |
Injection-mould around inserts | 0–5 M | 1–500 mm | 1–1,000 mm | 1–1,000 mm | 0–50 kg |
Multi component injection moulding | 100–5 M | 1–2,000 mm | 1–1,500 mm | 1–2,500 mm | 0–50 kg |
Transfer moulding | 100–5 M | 1–2,000 mm | 1–2,000 mm | 1–2,500 mm | 0–50 kg |
Foaming | 100–100,000 | 1–2,500 mm | 1–2,500 mm | 1–2,500 mm | — |
Extrusion blow moulding | 300–10 M | 1–5,000 mm | 1–3,000 mm | 1–3,000 mm | — |
Compression moulding | 300–2 M | 1–2,500 mm | 1–1,500 mm | 1–2,500 mm | 0–50 kg |
Rotational moulding | 300–1 M | 1–3,000 mm | 1–3,000 mm | 1–3,000 mm | — |
Forming (Plastics & Rubber)
| Technologies | Lotsize | Length | Width | Height | Weight | Material thickness |
|---|---|---|---|---|---|---|
Thermoforming | 100–100,000 | 1–4,000 mm | 1–3,000 mm | 1–4,000 mm | 0–100 kg | 0.1–20 mm |
Casting
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight |
|---|---|---|---|---|---|---|
Machine moulding (sand casting) | 1,000–1 M | 1–1,000 mm | 1–1,000 mm | 1–1,000 mm | — | 0–100 kg |
Gravity die casting | 1–100 k | 1–1,000 mm | 1–700 mm | 1–1,000 mm | — | 0–200 kg |
Pressure die casting | 500–5 M | 1–800 mm | 1–600 mm | 1–800 mm | — | 0–50 kg |
Investment casting | 500–5 M | 1–500 mm | 1–500 mm | 1–500 mm | — | 0–100 kg |
Low-pressure casting | 1–1 M | 1–1,000 mm | 1–1,000 mm | 1–1,000 mm | — | 0–100 kg |
Hand moulding (sand casting) | 100–500 k | 1–1,500 mm | 1–1,500 mm | 1–1,500 mm | — | 0–2,000 kg |
Centrifugal casting | 500–50,000 | 1–1,000 mm | — | — | 1–1,000 mm | 0–100 kg |
Continuous casting | 1–5 M | — | 1–500 mm | 1–500 mm | 1–500 mm | — |
Thixoforming | 1,000–5 M | 1–600 mm | 1–600 mm | 1–600 mm | — | 0–3 kg |
Sintering & Powder Pressing
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight |
|---|---|---|---|---|---|---|
Sintering | 1,000–5 M | 1–150 mm | 1–150 mm | 1–150 mm | 1–150 mm | 0–1 kg |
Metal injection moulding (MIM) | 1,000–5 M | 1–150 mm | 1–150 mm | 1–150 mm | — | 0–0.5 kg |
Surface Treatment
| Technologies | Lotsize | Length | Width | Height | Weight |
|---|---|---|---|---|---|
Anodizing | 1–5 M | 1–500 mm | 1–500 mm | 1–500 mm | 0–1,000 kg |
Powder coating | 1–5 M | 1–3,000 mm | 1–3,000 mm | 1–3,000 mm | 0–300 kg |
Spray-painting | 100–5 M | 1–2,500 mm | 1–1,500 mm | 1–2,500 mm | 0–200 kg |
Cable Preparation
| Technologies | Diameter |
|---|---|
Cable preparation | 1–5,000 mm |
Turning
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight |
|---|---|---|---|---|---|---|
Swiss turning | 500–50 M | 1–10,000 mm | — | — | 1–10,000 mm | — |
Hard turning | 500–1 M | 1–100,000 mm | — | — | 1–100,000 mm | — |
Broaching | 500–5 M | 1–10,000 mm | — | — | 1–10,000 mm | — |
Deep-hole drilling | 500–5 M | 1–100,000 mm | 1–100,000 mm | 1–100,000 mm | 1–500 mm | 0–20,000 kg |
Centering / end facing | 500–5 M | 1–100,000 mm | — | — | 1–100,000 mm | — |
Milling
| Technologies | Lotsize | Length | Width | Height | Weight |
|---|---|---|---|---|---|
5-axis milling machines | 5,000–5 M | 1–10,000 mm | 1–10,000 mm | 1–10,000 mm | 0–10,000 kg |
Materials
Non-metal inorganic materials
CeramicsGlassConcreteCast mineralsGraphite
Plastics/synthetic materials
ThermoplasticsAcrylic (PMMA)High performance plasticThermosetsElastomersSilocone (LSR)Natural and vulcanised rubberGlass fibre-reinforced plasticCarbon fibre-reinforced plasticParticle reinforced composite materialsWood-Plastic-Composites (WPC)Natural Fibre Composites (NFC)
Light metals
Aluminium and aluminium alloysMagnesium and magnesium alloysTitanium and titanium alloys
Sintered materials
Metal powder for formed partsMetal powder for hard metal
Cast metals
Cast steelCast iron
Advanced Materials
CarbideSilicium
Steel
Stainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)
Contact
Location
Main locationMühlstrasse 42, 73660 Urbach, Germany
Company contact
Contact persons
DH
Detlef Holzwarth
Are you a supplier?
Find perfectly matching requests.
Are you a buyer?
Submit your request.