Continuous casting: Find suppliers on Techpilot

With our experience in various casting techniques and finishing processes of various casting, we have been active in the market for more than 40 years. We support and relieve our customers and offer the possibility to deliver a complete product, from processing to after-treatment.

Our mission

We focus on designing, manufacturing and delivering a total package of products. You can call on us for small and large work, but you can also use a certain processing or finishing process for your products. We are happy to be your adviser and partner for all your castings, whether it is a single piece of product or a larger series of products.

We cast, melt, rotate milling, assemble and construct your product exactly as you wish. We place high demands on our quality. With us, a product does not leave the warehouse until it meets all the requirements regarding the mechanical properties and conditions. That way you can be sure that you will receive the highest quality at a competitive price.

You would like to make metallic components additive? Are you interested in the possibilities of this technology?

With the additive manufacturing of 3D-printing metal (SLM, Laser-cusing®, DMLS etc.) we offer you a production technology that is no longer used only in prototype production. This process offers completely new possibilities where conventional processes such as laser cutting, turning or milling reach their limits.

This is a process that is used exclusively for the production of metal. As with 3D printing, the components are built up by layer-by-layer build-up and fusion of metal powder; the component has almost identical mechanical properties to the original material.
You need support in implementing your automation project?

Then you are exactly right with us! We realize complete manufacturing cells according to your idea. From the feasibility study on the construction and assembly to commissioning and on-site support, we are the right partner for your project.

In particular, we cover the following areas of responsibility:

- Project Management
- Programming
- 3D printing metal (additive manufacturing)
- Security management
- 3D scanning
- Milling technology
- Construction
- Assembly
- Hose packages
- Service
- Training

Our 3D metal printing services at a glance:

- construction work (cooling ducts, component optimization, etc.)
- Checking the cooling channel design (flow simulation, thermal images, flow analyzes)
- coatings
- Plastic prototypes
- Component measurement
- Creation of plastic models
- 3D scanning / reverse engineering
- fine machining (milling, grinding, eroding etc.)
- Surface treatment (anodizing, electropolishing, etc.)
- hardening
- welding

When working in higher levels we are RELIABLE yours.

Tiger Lift is a subsidiary of the company Paksan in Turkey. Our parent company is 32 years active in the Turkish market for metal processing and is represented in more than 50 countries. Tiger Lift is a further development of the Turkish mother and is active in both down- and upstream active activities for metalworking and for crane and lift design.

We offer extensive services around the material to metal as well as in the processing of. We also use our expertise in materials processing as well as in mechanical and automotive engineering to our customers reduce anew with tailored solutions always ahead.

We are of the opinion that German craftsmanship is combined bring additional value with our international experience to our customers.

We do not only follow the latest developments in our fields, we also develop self-innovation.
Especially in mechanical and automotive engineering company Paksan has its research and development work massive boost to lay already the breeding ground for the work of tomorrow.

Also in the metalworking sector, we are constantly keen to improve and expand our expertise. We are in constant contact with renowned research institutes in Turkey. This high demand is supported by the large number of certificates that have gotten our products.
We strive every day with our successful staff who is always trying to improve and our products, yet offer you better services.

When working in higher levels we are RELIABLE yours.

PEOPLE WITH EXPERTISE AND EXPERIENCE

As a customer, you benefit from our generation-spanning experience and high quality awareness our specialists, which they continuously pass on in the company and in training. When it comes to tightest tolerances, complex geometries and demanding surfaces, REINER is your contact partner.


ZINC DIE-CASTING
With zinc, extremely filigree or thin-walled, technically high-quality parts can be cast and a very high degree of accuracy is achieved. In addition, zinc die-casting guarantees high productivity even with small quantities and, thanks to its durability, is a very interesting economic process.
At our location in Furtwangen, zinc die-cast parts with a part weight of up to 700 grams cast in die casting machines with a clamping force of 5 to 125 tons. With a maximum clamping area of 400 x 600 millimetres, we cast the alloy Z410.


MIM - Metal Injection Moulding
In series production, MIM opens up completely new technical possibilities - right up to highly complex geometries and always with optimised cost-effectiveness.
Cross holes, internal and external threads, gear teeth and surface structures are easily integrated into the component by MIM. The process combines the freedom of plastic injection moulding with the properties of metals. At REINER, a selection of low-alloy and stainless steels is used here.


PRECISION CUTTING with forming technology
In the field of precision stamping and forming technology REINER offers a range of processes and technologies for high-precision stamped and bent parts. Fine punching, hydraulic bending processes, NC punching or NC bending are as much a part of this as laser cutting.


ASSEMBLY SERVICES
Thanks to our expertise and range of services as a specialist component manufacturer, we can also process complete assemblies, partially assembled assemblies, components, system assemblies and assembled individual components for you. A unique selling point of REINER in component assembly is the vertical range of manufacture, which starts with the sketch plan if required. In the in-house development center, engineers are available at CAD stations to work out plans and transfer them seamlessly into the production of the components.


TOOLBUILDING
We are your partner for mould making, precision stamping tools and devices.

The equipment:
- CAD / CAM for design and production
- sink and wire eroding
- Surface, profile and jig grinding
- Most modern CNC programming technology
- HSC milling
- Coordinate measuring technology for form and pattern measurement
- Centres for machining
- Services from the design to the finished component.

In addition to the design and manufacture of tools and devices, we carry out maintenance and repairs ourselves.

As a technical trading company, we can offer you a wide range with our long-standing, certified manufacturing partners
Offer delivery program.
Our strengths:
automatic turning parts
CNC turned parts
CNC milled parts
CNC sheet metal processing (laser, punching, folding)
TIG-MIG-MAG welding
Stud welding, spot welding
Press-in bolts, press-in sleeves
assembly assembly
surface treatments
Electroplating, powder coating, blasting, grinding, pickling
CAD construction
prototyping
warehousing, logistics

The medium-sized enterprises THIERBACH from Lower Hall near Heilbronn supplies
Companies from all industries as tailored solutions for the
Parts subject.

TURNING AND MILLING PARTS
THIERBACH processed according to your specifications, all machinable materials, including steel, stainless steel, brass, aluminum and bronze and precious metals and special materials for the aerospace industry.

SINTERFACE PARTS
For the production of sintered parts THIERBACH used exclusively powder with demonstrated high quality. Depending on requirements, the base material of various alloying elements are added.

Formed
In the area of formed THIERBACH offers various production options such as cold and hot extrusion. In addition, a mechanical, metal-cutting rework is possible.

PUNCHING AND BENDING PARTS
In the field of stamping and bending parts offers THIERBACH solutions of metallic and non-metallic materials that are manufactured on CNC machines.In addition, welding can
be performed.

LASER COMPONENTS
In the area of laser parts are available from THIERBACH steel, stainless steel or aluminum products with extremely high precision contours in different thicknesses.

CASTINGS
In THIERBACH you get castings in all major manufacturing processes: aluminum die-casting, aluminum sand casting, zinc die casting, copper sand castings or precision castings.

DEEP DRAWN PARTS
THIERBACH provides you with high quality deep drawn parts made of stainless steel, aluminum, brass, bronze, iron, chromium or copper, either as a single function template or as a large series.

ASSEMBLIES
Not just when you need a single part, but even with demanding assemblies, you can count on THIERBACH: in partnership, economic and logistical point of view.

CERTIFIED QUALITY
An important part of THIERBACH quality philosophy is the maximum quality assurance in the production of your parts and assemblies.

FACTS: QUALTÄTSSICHERUNG
- Certification according to DIN EN ISO 9001:2008
- Erstmusterprüfberichtenach VDA
- PPAP documentation
- IMDS entries
- Uniformity measurements
- Surface measurements
- Length measurements
- Measuring equipment management
- Sampling inspection according to AQL 1
- SPC tests

Possibilities of surface and heat treatments
Even when it comes ächen to the finishing of surfaces, THIERBACH provides organizational and economic advantages: Through partnerships with reputable companies you get:
- Modern production techniques
- Everything from prototype to mass production
- Different machining options and THIERBACH all the possible rework and surfaces.In this way long and expensive transport routes and the total cost per piece If omitted significantly reduced.

THIERBACH offers:
Galvanizing / / Copper
Passivation / / hard chrome plating
Burnishing / / Gilding
Dacromet / / Geomet coating
Cadmium / / Nickel
Chromate / / anodizing
Phosphating / / pickling / / Silver
Case hardening / / Inductive
Glow / / start / / Slot
Embossing / / Bending / / rubbing
Lapping / / honing / / punching
Engraving / / brushes
Polishing / / electropolishing
Grinding / / trowalizing
Sand and glass bead blasting


Flexible Logistics
THIERBACH is not content to create the correct part, but is only satisfied when you is this the right time and at the right place. Thus, for example, already taken in the packaging that it contains all the elements for a smooth production: Logo, number, barcode.

We are an industrial and commercial agency with direct suppliers and production facilities in Poland, Czech Republic, China, Italy, Taiwan, India, Turkey and Germany.
We design and produce together with our partners to our customers in the following areas:

Welded structures such as caddies, storage racks, long-product pallets.
Steel construction, welding in general. Surfaces such as rays, galvanizing, painting, powders.

Sheet metal processing all materials:
CNC punching, nibbling, edges, laser welding, cutting
Fully automated bending center, powder coating,
Deep drawing, laser cutting, punching from coil, components,
Services according to customer requirements

Turned parts, milled parts made of all materials

Castings and their processing

Plastic injection molded parts up to 2,500 grams weighing, + Toolmaking
Extrusion plastic profiles
Aluminum profiles and their processing

Cable assemblies, wire harnesses, control boxes and control cabinets completely

Agricultural Engineering

Bent wire parts

Diecast

Bend and process tubes

We specialize in Additive Manufacturing - particularly DMLS and precision CNC processes.
From design conceptualization to AM, modeling, prototyping, serial production, and post-processing, we offer comprehensive Engineering and Manufacturing solutions tailored to drive your success.

We, Metallbau Schmalenbach, specialize in manufacturing a wide variety of high-quality and tasteful stainless steel and corten steel accessories. Years of experience in working with metal products, experienced know-how and the gift for exceptional design give our products uniqueness. The focus is on narrowing down to the essentials. In a charmingly flooded world, peace and relaxation are important to us. Simplicity is the goal and with it the uniqueness of our products.

In addition to our wide range of products, we also offer you the opportunity to have your ideas implemented. We offer you custom-made custom-made products. You are welcome to visit us at Linienstr.14 in 42289 Wuppertal.

C. Melchers & Co. was established on January 1, 1806 in Bremen, where the global company still maintains its headquarters to this very day.

In the first few decades of the company’s history, over 30 ships sailed the oceans of the world under the Melchers flag, linking the ports of Europe, America and the Pacific.

In the 1860s, C. Melchers & Co set up operations in Asia, where all its trading interests swiftly moved. At the same time, with the onset of steam ships, it abandoned its own shipping business to devote itself entirely to extending its trading operations.

1866 saw the establishment of the first branch in Hong Kong, in the wake of which China began to develop into a key lynchpin for the company’s business. The ensuing decades were a period of rapid growth for Melchers in China, with over 2,000 people employed at 12 branches and plants throughout the country.

The First World War proved to be a setback for business relations, although business quickly recovered. It was not until the end of the Second World War in 1945 that business came to an almost complete halt. Even so, the company continued to survive, re-opening its first branches in Hong Kong, Singapore and Kuala Lumpur in the early fifties and gradually extending its branch network across Asia.

Following the opening of the Chinese markets at the end of the seventies, Melchers set up branches here again, underscoring the significance of Chinese business for the company.

With the establishment of a branch in San Francisco in the early eighties, the company also started to engage in US-Asian trade so as to gain a share of the rapidly growing trading relations between these two regions.

Trade with China remains a key focus of the company’s overall business, comprising as it does imports of special natural products and finished goods on the one hand and exports of plant, machinery and supplies for the Asian industry on the other. Yet, business with South East Asia has since also come to the fore, with the company amassing broad-based expertise in marketing and selling consumer goods in particular.

There are special departments for each article group in Bremen as well as at the foreign branches. They work largely independently within the overall company and are staffed by highly qualified experts. Over 1,000 employees in Germany and abroad assist customers and suppliers with their specialist knowledge. Rather than being based at the company’s headquarters, most of these employees are now stationed at subsidiaries, something which in turn reflects the company’s further development and the strategic alliances which it has forged.

Automatic turning

Our core business is production of aluminium die casted parts

Other standard services:

- designing and manufacture of casting tools (molds),
- machining of castings,
- surface treatment of castings,
- assembly (casted parts with other requests assembly parts)
- logistic services.

We are a small company, founded in 2007 company based in the center of Cologne. We are specialized in the production of precision parts from all areas and materials. From a single prototype to series, we use the most modern equipment of the highest quality.

Garmetal Srl, located in Briosco (Mb), is family run die-casting foundry dealing in Aluminium and Zamac since 1969.

Under the motto “To Produce Good Quality Articles Respecting the Environment”, the main objective of the Company is that of realizing a strict organization of the manufacturing process, providing its customers with a complete service, starting from the product design, to mould manufacture, die-casting, finishing, including mechanical workings as well as surface treatments.

For over 50 years of activity, making use of hot and cold chamber machines,
the Company has been serving a wide range of sectors:
Automotive, Motorcycle – Pneumatic, Oil Pressure – Electronic, Telecommunication – Electric, Electromechanical – Household, Gas – Lighting – Industrial Machines – Building Fittings – Furniture Fittings – Sports Articles, Collecting, Equipment.

You are on the lookout for a certain material?

Steel casting, grey cast iron, nodular cast iron, aluminium casting, die-cast zinc? Or do you require some other material?

You prefer a specific moulding process?

Sandcasting, shell moulding casting, Investment casting? Lostwax casting, Lostfoam casting?

You are interested in moulds and cores made of furan resin sand or in other core technologies like cold-box and hot-box?

We further offer: casting tools made of wood, synthetic material, metal and polystyrene; tools for the manufacture of forged parts. Surface treatment such as priming, painting/lacquering, galvanizing, chrome-plating and a lot more. Machining after all machining procedures.

Delivery – if you wish – to your in-house warehouse. Or would you prefer a consignment stock? Let us know!

Our fully integrated foundry has many years of experience, cutting-edge technology and first-class infrastructure. We are pioneers in the production of steel and aluminum alloys and multi-material bronzes of the highest quality and provide you with products that meet the highest standards.
As a proud member of the Foundry Alliance group of companies, we strive as a precision foundry to provide our customers with first-class products of the highest quality that not only meet their requirements but also offer them significant added value.

foundry group
4 locations as a foundry
1 location with mechanical processing

The Anant GmbH is a marketing subsidiary for own products & representation for few well-selected Indian manufacturing units. We have a good knowledge + experience for quality systems & supervised manufacturing outsourcing from India.

Our German representation offers a potential to take up a responsibility to supply the article as door delivered & being your contact/contract partner. whereas our Indian technical team offers possibly of economical in-house manufacturing as well as local outsourcing under our supervision & our own quality control.

At Patel Technomation - India, We have the experience and capability of sub-contract CNC machining including supply/procuring of foundry and forging products in small batches as well in large quantity. We follow the TÜV SÜD ISO 9001-2000 quality system and are dedicated to providing excellent customer service, and the timely delivery of quality products.

Our Manufacturing unit is located at major Auto-parts manufacturing, Casting, Forging & engineering hub in India; which offers us a good development possibility for any specific/special part manufacturing possibility in a most economical manner.