Subcontracting work: precise, flexible, reliable - cheap. FUCO-HEG offers the complete range from the development and construction to production. A further benefit is its own electronics department. From the circuit diagram to programming, cabling, drive panel construction, assembly, etc. Production depth which is convincing. What counts is the fastest and most cost-effective way to achieve the results. We offer engineering and production services from one provider: * Production of parts according to stipulations * Production and assembly, incl. electrical and control engineering * Complete solutions - development, construction, production of machines and systems 3-D construction: consultancy, optimisation and an independent construction solution (see 3-D construction). Mechanical processing: Modern production equipment using CNC machines, processing centres and conventional machines. Welding: welding specialist with major verification of suitability according to DIN 18 800-7, section 6.2 with extension according to DIN 15 018-2, crane. In our locksmiths shop/welding shop we produce steel constructions up to a unit weight of 10 t. We have extensive experience in the field of sheet metal processing, incl. welding technology, of VA and NE-sheet metal. FUCO-HEG Machine pool and services The listed machines are designed for serial production. * Boring mill * Milling machines * Conventional lathes * High-performance radial drills * Surface grinding machine * CNC lathe, slant bed type * CNC bed type milling machine * Horizontal drills and milling machine Other services: priming --- lacquering --- processing of stainless steel and NE metals electronics department --- service, maintenance, repair Car pool Transport and customer service vehicles

CHANGE FROM AN IRON WORKS SCHWÄBISCHE THE MODERN INDUSTRIAL OPERATION A company in the course of time. From the iron work of the year 1708 a modern company with over 2900 employees developed world that now offers in the fields of foundry technology, steel profiles, drive systems, slide bearings and machine components to the customer oriented products. Then as now, the name ZOLLERN stands for quality, customer focus and technical expertise. And still we attach great importance to comprehensive advice and customer focus - be it in the most favorable interpretation, for example, your gear, your fine casting, or your plain bearing at the optimum material selection. Thus, we offer our solid STEEL PROFILE according to your needs to: from simple DIN profile to the finished, complicated special profile. The FOUNDRY TECHNOLOGY processed today a wide variety of alloys of copper over steel to aluminum.In this area, various wrought copper products and castings are made: Those are forgings, fine and vacuum investment castings and sand, mask and centrifugal castings. And if you need a cast of your Rapid prototyping model, we pour it for you in the material of your choice. In the ANTRIEBSTECHNIK we specialized according to the needs of our customers to the product groups and plain bearings, gears and winches and linear elements for handling technology. The BEARING TECHNOLOGY, youngest member of this chain coincides with the current product from all areas of application of large-scale engines and general engineering. These include in particular bearing for large diesel engines in ships, locomotives or stationary systems, plain bearings for large compressors, turbines, gears and electrical machinery, wholesale plain bearings for cement mills and ore processing, thrust bearing pads for hydro-electric facilities, housing and plain bearings, Kippsegmentgleitlager as well as various forms of special bearings and multi-layer Verbundgußteilen. Finally, MECHANICAL ELEMENTS: They complement our program with high-precision steel shafts, flat and round guides, they are, as the profiles, handles up to eight feet long and individually. All products can be finished in the home as well as heat and surface treatment. Even fully assembled modules are possible.

We are a familiar mouldmaker companie specialised in technical moulds . Our staff is young but skilled with hight academic degree, and We can offer our experience in injection moulds of thermoplastics and thermosets with one material or bi-material at once.

Nexa3D is a leading manufacturer of industrial 3D-printers, and provides solutions for a wide range of industries. Injection mould tooling is among the key focus areas, and Nexa3D is emerging as a leader in 3D-printed injection mould tooling technologies. Freeform Injection Molding - a company flagship product - has been adopted by industry leaders such as Wilson Sporting Goods, PepsiCo, Fraunhofer and Alpine Advanced Materials, and allows injection moulders to sustainably reduce pilot tooling costs and lead-times.

We are a company that joined the 3D Printing industry and we want to expand quickly. In future we will be making CNC-machining and other technologies.Check an eye on us !

Prototyping with FDM up to functional series parts manufactured with SLS or SLA. Today, 3D printing has become an integral part of numerous industries, such as aerospace, automotive engineering, consumer goods, medicine, and education. The wide range of 3D printing applications is redefining the limits of manufacturing.

We are new on the slovenian market of MJF 3D printing. With our creativity, accessibility and reliability, we are able to produce a prototype or a series of products. You can entrust us your idea and we can bring it to life with our 3D printing device. Our goal is to successfully develop and keep up with the technological development. We are a new and young company from Kočevje, which is enthusiastic about 3D printing. Our work includes Multi Jet Fusion printing, which has been capturing the market for a long time as the printing of the future. Our vision is: “With ideas and technology to functional and geometric pieces in a design and industrial environment. “ We can prototype or mass produce your products with Multi Jet Fusion printing. With Multi Jet Fusion printing, we can produce functional products in colour or in black and white, with control in voxels and in a noticeably shorter time. All product features depend on your idea. Our company’s equipment can create the products you need for your development, as we can also produce components that cannot be made using traditional methods. The technical characteristics of these products are equivalent to injection moulded plastic products (watertight, airtight, and isotropic). For the actual products, all you need is a 3D model in STL, STEP or OBJ+MTL format. So, you can get an economically viable finished product without using expensive injection moulding tools. Contact us as we look forward to collaborating with you!

Our services include contract manufacturing, 3D printing, CNC machining, plastic injection molding, 3D scanning, product development support, and documentation creation.

Hitega Präzisionsmechanik GmbH is an owner-operated, medium-sized company specialised in precision technology. For more than 20 years and with over 100 staff members, we have been realising the technical concepts of our customers from the automotive industry, clean technology, semi-conductor industry, aerospace industry, medical technology, as well as the optical industry and the devicebuilding industry, innovatively, precisely ad efficiently in our plants in Gangkofen, Southern Germany, and Penang, Malaysia. Hitega is the specialist within the field of precision technology. As our customers’ partner, we take on the complete building of special machines and, as an OEM-Serviceprovider, we manufacture high precision modules and put together modular systems with electronic, pneumatic and optical periphery. In doing so we master the complete process, ranging from engineering to manufacturing and assembly processes to the quality-ensuring operational test, as well as procurement and logistics. Our actions are determined by the challenge to always offer a convincing benefit to our customers. Our fields of expertise: conception manufacturing assembly testing & inspection and distribution of high precision modules, modular systems and special machines with electronic, pneumatic and optical periphery We master: Engineering and project management Single and series-production of high precision modules and modular systems Assembly of mechanical modular systems with electronic, pneumatic and optical periphery, Production and assembly of prototypes Surface refining, laser welding and laser inscription of modules and modular systems Testing and checking of high precision modules and plug&play modular systems according to the customer’s specification Specialised procurement management Logistics

Our company has removed its location in Nabburg / Bavaria, a small town about 40 km from the German-Czech border. Our manufacturing is located only about 70 km away from the parent plant in Nabburg and in Tachov (CZ). We design and manufacture according to ISO TS 16949 to over 100 injection molding machines from 25 to 1000 tonnes with more than 350 employees and products in a multi-component injection molding technology. We process all thermoplastic resins in reinforced and unreinforced version of LDPE to PEEK, TPE and PUR, the biodegradable polymers and Plastic bonded magnet or electrical. conductive materials

Materials A demand-sorted material storage provides the conditions for short delivery times, maximum flexibility and punctuality. Also, the materials used, the quality plays a decisive role: For use only high-quality cold-rolled strips reputable, certified mills come. Materials are processed from 0.05 to 10 mm thick and coil widths up to 400 mm. The range of materials includes the following qualities: Unalloyed steels according to DIN EN 10139 Hardening steels according to DIN EN 10132-2 Quenched and tempered steels according to DIN EN 10132-3 Spring steels according to DIN EN 10132-4 Stainless steels according to DIN EN 10088-2 Aluminum and wrought aluminum alloys according to DIN EN 485-1 and DIN EN 485-2 Copper and wrought copper alloys according to DIN EN 1652 and DIN EN 13599 Hard paper, pressboard, plastic Toolmaking The quality of the tool is one of the most important prerequisites for trouble-free and efficient punching parts production. The tooling of E. Winkemann manufactures tools with highest precision. The field of tool / construction is equipped among others with the following devices: 2D and 3D CAD systems in the field of tool design CNC EDM, drilling, milling and jig grinders with CAM connection The exchange of design data is in IGES or DXF format. For around 6000 are consequential, composite, flexural, and embossing tools or total cuts available. Stamping technology The stamping of E. Winkemann is equipped with a powerful machinery, responsive to the diverse areas of use and the materials to be processed. The machines range from mechanical or hydraulic punching machines and presses to various bending machines: Hydraulic machinery and punching machines (25 to 500 tons) Eccentric (10 to 35 tons) Hydraulic presses (15 to 200 tons) Punching and bending machines (up to 15) Stamping machines (up to 200) Fine blanking machines (up to 700) Fineblanking / cutting The fine blanking allows the production of precision parts with smooth cut surfaces and high dimensional accuracy. Costly rework can be omitted. Straight-cut percentage up to 100%. The fine blanking machines with max. 320 tons pressing force can process material thicknesses up to about 7 mm. In addition, there is also the possibility of products on fine blanking machines with max. To process 700 tons press force. Flatting If the required thickness tolerance or flatness can not be achieved by cold rolling with the primary materials with a thickness of 0.8 mm, the parts are ground flat. The result is a thickness tolerance and flatness of ± 0.005 mm. High demands of these parameters are primarily intended for products which are used for example in units and transmissions. Representing this are start-up, passport and shims to call. Fine grinding Slices or moldings with a thickness of 0.8 mm and an outer diameter 4.0 mm könnnen be honed for maximum precision requirements with a tolerance of ± 0.001 mm. Post For the post-processing of the products are modern, electronically controlled and linked compensation and processing equipment available: Fully automatic compensation system with process data acquisition and batch documentation Program-controlled systems for automatic vibratory deburring Washing and cleaning equipment Machines and assembly equipment for drilling, tapping, riveting, stamping and assembling. Surfaces All parts ...

Fan art 40 years experience, top quality and a fair price-performance package. With commitment, the necessary know-how and innovative ideas, we specialize in fan such as axial fans, centrifugal fans and flat fan highest quality. The high-performance fans come in broadly diversified fields such as medicine, avionics, industrial and automotive markets each and every day their prowess. They are the enormously high standards exemplary justice of reliability of these areas. ______________________________________________________________________ Enclosures Robust, individually and German at the highest level of engineering. Thus one could describe the case of Bedek enclosure technology. More than 650 modifiable models are available here to choose from. Using the latest technology will be produced at Bedek high-end housing excellence performance. With the Bedek ENGINEERING service, we support you professionally and personally from the idea, through development and construction to finished product in all phases of your project. _______________________________________________________________________ Precision resistors A look into the future. Maximum reliability with maximum resilience make the custom-made precision resistors become the world leader. Application areas such as medical, aerospace and military speak for themselves. Bedek introduces zertfiziertes Precision center and can provide tailor-made film resistors for your needs within 24 hours. TCR of 0.2 ppm / ° C. ESD immunity> 25KV Tolerance: 0.005%

When we started in 1995, the plastic polytetrafluoroethylene (PTFE) had long been invented. Nevertheless, Alptec was able to establish itself as a manufacturing specialist for P T F E and P T F E/compound products within a short period of time. Because not only delivery dates and unit costs are decisive for our customers (internationally), but also an understanding of the application — and precision. We bring the valuable properties of PTFE to bear wherever they are essential for your products and solutions: whether in the automotive industry, in mechanical engineering or in another high-tech sector. Alptec will manufacture semi-finished products for you or produce finished parts in accordance with the drawings. Thanks to efficient and reliable manufacturing systems, we meet the highest quality criteria even with tight time and cost requirements. Also because — in contrast to PTFE — we are anything but slow to react.

From design to prototype and produce line, a comprehensive company Whatever the field of activity of a company, icts leaders from now on Should Have an obligation to do everything to AVOID leakage or dispersions customers possible. Review: The most common strategy is to position Itself on the market as a supplier of "global solutions", a generic term for a wide-range of services and benefits. The engineering office specializes in. technical hand by injection, CREOPP-TEC positions on the market All which can not only Provide the general solution to the original medical equipment manufacturing in the medical industry, the purpose aussi automotive accessories, toys, electronics, defense or cosmetics. Experienced technical experience over the years is to get all the additional knowledge. The company Operates since 1996 for the design and manufacture the Following The tools of all the field (injection / over molded, unscrewing, double injection for parallel and vertical 2K injection molding machine Blow molding gold...). If CREOPP-TEC subsequently assembled on a network of French molders, it aussi offers a low-cost industry with China Directly with our Chinese partner. Do not be dependent on technology goal INSTEAD take the best of each, this is the credo of the engineering office. From the stage of designing hand-TEC CREOPP CONSIDERS the eco-design and Provides referenced materials before the next simulation's phase. The rheological software Cadmould Rapid Could optimize the injection process and control the deformation. Not long after, in the stage of rapid prototyping and adjust the tool, development and industrialization icts on injection machine from 50 to 1000 tons, the company Will show the extent of icts different skills. For Having a final visual effect Quickly, the customers of CREOPP-TEC POSSESS lots of ways: such as stereo-lithography HR (High Resolution), the selected laser sintering (polyamide, Duraform HST gold Duraform Flex A6 steel or aluminum) or odd CNC rapid prototype, Vacuum Casting and RIM (Reaction Injection Molding - Process shaping thermosetting plastics).Finally, working on the industrialization stage encompasses all stages, it includes the assembly, painting, packaging, various checks and tests.

Quick and inexpensive for design and production, Rapid Protyping and Rapid Manufacturing Save time and costs between design, prototype and series production. Respond quickly if you need new products! Using the latest technology, we can promptly model complex Function models, parts and molds for you to produce. We manufacture in the laser sintering process prototypes made of plastic (PA), flexible material (rubber-like, 50-85 Shore A) and metal (similar to ST-70) for Applications: Automotive - Electrical-Electronics - Home Appliances - Packaging Technology-Food Industry - Sanitary engineering - Connection technology - kitchen equipment, etc. The vacuum casting process is used to manufacture sophisticated prototypes made of plastic with a high degree of fidelity. Within a short time you are high-quality, true to the original prototypes. They reach a high cost savings over the traditional form of production from steel tools. The monitoring of work processes by microprocessors ensure optimum casting quality and ensure flawless results. Depending on Vakuumgießwerkstoff and complexity of the shape, up to 30 parts are made from a mold. This has a Vorseriencharakter and saves costs.

Harald Berfelde GmbH Since more than 100 years, the Harald Berfelde GmbH produces technical plastic parts of all common thermoplastics with single or multi-component injection molding. Our portfolio contains: High-level tooling – from Design to volume production Research + Development Design, Simulation of products Development, prototyping Injection molding production Assembly + logistics Project management, interface to the customer

Welcome to 3D Orthopedics Service — your reliable partner for innovative 3D printing solutions! Using the latest 3D printing technology, we offer tailor-made products that are tailored to your individual needs. Our services include both the production of series parts and the construction of prototypes — always with maximum precision and efficiency. We use two advanced printing processes: 1. FDM (Fused Deposition Modeling) printing: Perfect for sturdy and durable components. With this process, we produce custom-fit orthopedic devices such as splints, prosthesis components and other series parts. 2. DUV printing (Direct UV): Ideal for particularly fine structures and high-precision surfaces, for example when creating prototypes and specific, complex parts that require the highest level of detail. Our technologies enable us to offer you both individual solutions and series productions of consistently high quality. Rely on our expertise in 3D printing and benefit from individual solutions for your orthopedic requirements. 3D orthopedics service — precision meets innovation!

The FPM Holding GmbH manufactures opto-mechanical and electronic assemblies and is a manufacturer of precision surveying, nautical and Deformationsmeßgeräten. As a former member of the Zeiss group, the company has many years of experience in Scientific Instrumentation of the item production to assembly and adjustment.

Cirp GmbH, based in Heimsheim / Baden Württemberg in the Stuttgart - Pforzheim area, was founded in 1994. In recent decades, cirp has earned an excellent reputation worldwide as a service provider for prototype and small-scale production. The company is well-known for the fast and high-quality production of models, prototypes, tools and final products in plastic, rubbery polymers and metal. In 2008 a company building with a hall was built. In 2013 the company was extended by a further production and administrative complex. Since then, the company has also offered training courses in the fields of plastics technology and generative manufacturing. Cirp GmbH now employs nearly 75 people and has been training apprentices in the fields of business management and modeling for years.

GWL is a medium-sized 3D printing service provider that, in addition to the industrial production of prototypes or series, also takes on the development or 3D printing optimization of your projects.