We who are Finkernagel GmbH a company based in Upper Bavaria medium-sized company and produce pre-finished parts, from material procurement to the entire range of machining complete processing to heat and surface treatment and final assembly. Our products are manufactured on the latest CNC lathes and CNC milling machines (CNC machining centers). We produce turned parts with a diameter of 1 mm to 300 mm and a length of 1 up to 1,000 mm. The possible operating range of our Frästeile goes from the smallest parts up to a length of 2,000 mm. Our strengths lie in the production of precision mechanical parts and assemblies made of steel, stainless steel, aluminum, brass, copper, plastic, etc. We produce from prototyping to small series to large series (10,000 pieces). Since 1999 we are certified in quality management according to DIN EN ISO 9001:2000. In addition, an integrated management system was introduced that in addition to the quality assurance and occupational health and safety includes.With the change from the EC Eco-Audit to DIN EN ISO 14001:2005, we contribute to the requirements of environmental protection also invoice. We offer our clients the best quality through advanced technology. Delivery program: Shaft, tube, axle, hub, spindle, Nozzle, Plunger, cap, ring, valve seat, adapter, pin, pins, guide, cam shaft, bearing sleeve, block, retainer plate, angle, flange, plate, etc. Industries: Mechanical engineering, plant engineering, printing technology, medical technology, aerospace Production Specification: Tangentialdrehen, diamond turning, hard turning, internal pushing, wobble rooms, 4-axis milling, 5-axis simultaneous milling, hard milling, screw conveyors milling

Our company was founded in 1960 by Edgar and Edwin Engesser. From the outset, it is our endeavor to offer our customers maximum reliability and utility. Therefore, it is no coincidence that we can already look back on a very long relationship with many customers. Edgar Engesser was over 40 years always competent partner of our customers. During this time he put our company on a solid foundation on which we can safely grow today. With Arno Engesser 1998 is already the third Generation occurred in the management. Thus, a continuity is guaranteed in our development, which ultimately affects the satisfaction of our customers positive. His thorough training as a toolmaker and then as a graduate engineer of precision engineering ensures that our customers expert advice on the pure turning out. Today we are proud that we form with our approximately 10 employees a team in which everyone knows exactly where and when it is to tackle. We are convinced that these are the most important factors to be able to inspire customers. The constant focus on the needs of our customers and aim to provide reliable and best performance to satisfy demanding customers happy, we have sound to today's performance since 1960 and allow future-oriented growth.

The Company D & O turned parts GmbH was founded in 1988 and is located in Wendlingen, in the industrial park OTTO, in the Schäferhauserstr.2 Our customers include companies from the automotive supplier and electronics industries, as well as the device and equipment. Our product range includes: - Turning - Milling - Drilling - Grinding With modern CNC machines, a computerized quality assurance (SPC) and highly motivated staff, we can offer high quality at low cost level. Our particular strength is in the range of medium and small lot sizes Mechanically we are set for: Complicated as well as simple CNC turning of the rod D 10mm to 80mm D CNC lathe parts up to 200 mm diameter CNC turning between centers L = 400mm Milling and drilling on machining centers X = 1000mm, Y = 600mm, Z = 800mm. It all common materials of plastic, aluminum, brass are processed to cutting steel and high-strength steels and stainless steels. Please contact us for a free, no obligation quote for you Turning parts, turned parts, precision turned parts, precision parts, machine parts, CNC turning, CNC machining parts, CNC milling, CNC drilling, CNC machining, turning wage, turning, contract manufacturing, machining, bolts, bushings, flanges, shafts, pins, gears

Supplier of metallic and non metallic turned and milled parts as well as preassembled an final assembled assemblies.

The company Herbert Weiss GmbH is a medium-sized family business which has existed since now almost 50 years. Our power is in mass production of turned parts. Our current scope lies in the furniture, electrical, architectural hardware, window and automotive industry. We manufacture exclusively from the coil with rotary machines. This production brings with it that we can not customize any dimension; dimensions, but fit into our range and are for us in the realm of possibility, are thus produced for our customers in high cost-effectiveness. The production takes place in a modern according to the state industrial hall covering an area of over 3,000 m2. This includes, for example, a fully automatic parts and Spänförderer, fully automatic parts-oil removal and chip disposal plant. In our production, 35 skilled workers working in the four-layer system. The current production site in the Ring Road 23 was built in 1995 and expanded to its present size in 1999. In the current production is measured every 30 minutes regularly drawing justice and documented. The documentary takes place by means of the Software and subject to continuous evaluation. For the production and timely delivery, we are always bemht to do everything humanly possible, because we are seeking a long-term business partnership with our customers. We enjoy the trust of many customers, our products worldwide without input control to their customers to provide direct (Ask for our references). We are DIN EN ISO 9001:2008 certified.

Special emphasis of our production forms mass production and production items for the general connection technique, spacer pin of SW4 - for SW13 as well as parts ready to be installed for furniture fittings and electrotechnical devices. Hofsäß use modern high-performance machines with horizontal and vertical operation to produce highest quality parts from coiled wire stock.

The RL-NC Products GmbH is a young and forward-looking medium-sized company. With our highly qualified employees we manufacture in the small and medium lot sizes range machined parts (turning and milling) of all types and materials. The component part and finished assembly is one of our core competencies. Furthermore, we offer our clients additional services such as hardening and surface coatings in various models in collaboration with our long-term partners. Customer satisfaction is very important in our home, just as our high standard of quality and our high flexibility in order processing. By moving to our new premises in 2008 we have improved our production range further.

Founded in 1963 as Snc, Min-Tor is a renowned company in the sector of mechanical small parts and precision shafts for electric motors for use in various sectors. Thanks to the quality of its products and the always punctual deliveries, it has grown over time until it became an Srl in 1980. The highly qualified staff and the desire to improve have allowed Min-Tor to receive UNI EN ISO 9001 certification: 2000, a guarantee for all its vast clientele. The company is spread over a covered area of 5000 square meters in a new structure built in 2003 and can count on a fleet of machines for the production of small, medium and large series, CNC sliding headstock lathes and cam lathes, as well as a complete range of machines suitable for finishing such as plunge and infeed grinding and machines suitable for reworking operations such as rolling, hobbing, transfer and induction hardening Our production is based on the specific design of the customers, also offering a consultancy service and feasibility of the details.

Workshop for the Disabled of Special Education Centre Irchenrieth eV For over 30 years in charge of the special education center for disabled eV people with special needs. At our institution, therefore, also includes its own workshop for the handicapped (WfB). This can compete with the private sector is well - both technical and human resources. We are equipped with advanced computer-controlled machines and employ both in the care of the disabled employees / inside as well as the planning and organization of production exclusively professionals. Great is the bandwidth of our production. We take orders from the fields of metal, plastic, electric and wood, but are prepared for work in fixture and mold construction. The WfB is therefore quite an attractive and efficient business partner. We offer quality and service!

BARGY-DECOLLETAGE, an independent company, was founded in 1950. One of the main activity is the production of screw-machining parts. Our Factory is located in Cluses – FRANCE on an area of 3 000 sqm. Bargy décolletage is able to manufacture high precision parts and sub-assembly for all of kind application. Its standard organization is in accordance to requirements of ISO 9001 – ISO 14001 – ISO 13485. We bring all of knowledge concerning: - Manufacturing all of type of Materials: Carbon steel, Stainless Steel, Aluminium, all kind of Brass, Engineering Plastic - Expertise in complementary service: Surface treatment, Heat treatment, polishing, tribofinishing, grinding, lapping and marking … - Expertise in cleanliness requirements - Visual Control 100% concerning the critical geometrics requirements We propose to be an efficient partner from the conception to the delivery. Our research about a perpetual “continuous improvement” gives us the possibility to propose to our customers competitive prices and services.

We manufacture multi-spindle and spindle machines, and CNC lathes precision turned parts up to a diameter of 65mm. We handle round, square and hexagonal materials of metal and Kundststoff. We also do additional work such as: Polygonal Boring Mill External cylindrical grinding Assembly of smaller components We also produce pre-finished turned parts / assemblies, by letting perform certain production activities of foreign companies such as heat and surface treatments and monitor.

ROJAX is a manufacturing company operating in the field of machining and turning. Our new factory located in Widuchowa near Szczecin was opened in 1994. On the area of 10 000 sqm and with the 3-shift work organisation we are able to manufacture a whole range of products, most of them for the car industry. Well-trained workers and a diverse machines' park let us fulfil the needs of the numerous car industry branches. Our products are made of steel, stainless steel, non-ferrous metals, cast iron and forged parts. We are working in big series but in order of our customers we are making small production, too. We think that because of our flexibility, rich experience and precision we are able to work for another branches, too. Modern stock of machine tools and well-trained employees give us the opportunity to machine the parts made of steel, stainless steels, cast iron and non-ferrous metals. We are focused on the serial production. On wish of our customers we also perform single orders. Our company provides goods as belt pulleys, sheels, pistons, hubs, drums, collars, rings and others which could be machined. They apply in cars of such brands as: VW, BMW, Daimler Chrysler, Audi, Land Rover, Ford and Masserati. All parts are carefully packed and dispatched to customers by our truck. At the request of our customers we can find solutions of special packaging and transportation.

- modules and parts for the printing industry - job shop for parts (steel aluminium, casted iron) for details see www.zirkon-print.com

We are manufacturers of turned parts on CNC lathes and cam-controlled automatic. The editing area in the CNC technology goes from 8 to 120 mm (200mm chuck) in diameter and 450 (800) mm length and. During the cam-operated lathes from 8 to 60 in diameter and up to a length of 100 mm The lot size ranges from 1 piece to large series.

We manufacture simple and complex precision turned parts at all appropriate plastic and metal - materials. Nowadays, we can produce up to 43 mm diameter bar stock and up to 180 mm on forage machines with driven tools. We produce pneumatic cylinders and provide all pneumatic control elements (valves, regulators, connectors, hoses, etc.).

CNC technology Wire EDM Metal finishing and metal processing Long turned parts We manufacture turned parts in a diameter of 2mm to 60mm from the pole, as well as 200mm in diameter than lining piece. Available to us Traub A, Traub TD, TB Traub, Traub TK, and lathes of the company Strohm. Other machine tools for finishing: CNC Machining Flott, CNC Tornomat, Charmilles wire EDM, as well as the company Weiler lathes, milling machines Rumag, Hermle, cover, drill Ixion, Gillardon, centerless the company Herminghausen d = 3mm to 60mm.

Set your expectations quietly higher We are your partner when it comes to individual solutions for high quality bolts, nuts, cold-flow pressed and turned parts or fasteners. Whether developed according to drawings or our design department according to your specifications, your prototypes and small series will exceed your expectations. Of course, we can supply standard parts according to DIN, but our real power you will experience elements, after which you normally have to look far. Parts are our strength, the world and for more than ten years. Thus the full flexibility for your just-in-time processes win, we keep most modern production and storage capacities on over 2,000 m2 of indoor area. There is also our quality standards beyond the standard, up to the (optional) 0 error readout. So our customer list reads like a "Who's Who" of leading companies from the Automotive Electric Fittings Lock and fitting industry and many other industries. Our customers appreciate our top service performance by people for people with whom you can talk - about technology that connects.

Are you in need of precision engineering for your manufacturing and assembly needs? Look no further than our state-of-the-art CNC services! Our team of highly skilled professionals specialized in high precision CNC manufacturing and assembly, utilizing the latest technology and equipment to produce components to your exact specifications. From prototyping to full-scale production. Our CNC services are versatile and can accommodate a wide range of materials, including metals, plastics, and composites. Being ISO 13485 certified, our commitment to quality extends beyond our products to our customer service. Don't settle for less than perfect precision - trust our CNC services!

FOR A BETTER FUTURE PRODUCTION WITH SUPERIOR QUALITY At the beginning of the 1900’s, the hot forging and water mill establishment and operation activities made by our grandfathers continued until the 1950s. Subsequently, the establishment and operation of diesel flour mills, the production of axles for oxcarts, and the production of water pumps working by hand and horse continued. After the 1960’s, our activities in the maintenance-repair and manufacturing of spare parts of gasoline and diesel water engines, maintenance-repair and spare parts of motor vehicles, turning and welding work continued until the 1990s. Our company was transformed into a Limited Company with a restructuring in 1994 and the manufacturing program was emphasized. Değirmencı increased its product range with the commissioning of the first CNC machine in 1995. In 1998, it moved to its factory with a closed area of 1800 m² on a 13.500 m² land, with a social facility and an administrative part, and later switched from individual production (semi-serial/serial) manufacturing system. In the following years, keeping up with the developing market conditions, it increased the number of CNC machines and expanded its production capacity. Our company has started ISO 9001:2000 training studies by going through a new structure within its body as of January 2004 and became a Joint Stock Company in May 2004. MILLER AUTOMOTIVE AND METAL IND. Inc. Since November 2011, ISO 9001:2008 and ISO 13485:2003 system studies have accelerated. As of 2012, it has been entitled to receive ISO 9001:2008 and ISO 13485:2003 certificates. In 2018, it accelerated its efforts to revise the ISO 13485:2016 certificate by obtaining ISO 13485:2012 and ISO 9001:2015 certificates. MILLER AUTOMOTIVE AND METAL IND. Inc. still produces various medical devices for the health sector in the country and abroad. İrfan USTA Chairman of the Board

The company OLEJÁR, spol. s r.o. was established in 2005 as a manufacturer of fiberglass products. Since 2008 it manufactures and installs tactile floor indicators, stair nosings, sanitary handles, Braille signs, anti-slip tapes and other products in the field of pedestrian navigation and safety. Machine park: Milling - Romi D1250, Feller MP-40A, Feller MP-30A, Hyundai F500 plus Turning: Citizen L32, Citizen M32, Hanwva XE35 Converting: Guidolin Girotto GD 301D