We take steel construction to the next level. This is achieved primarily through a well-developed manufacturing structure and our acquired expertise in Germany, Romania, and Moldova. Whether in mechanical engineering, vehicle construction, or special structures – we are your partner for high-quality steel processing, produced directly at our facilities and those of our subsidiaries.

Vimetec is a service company, made up of a team of professionals with extensive experience in the metal sector who are enthusiastic about carrying out comprehensive projects with our clients. We develop, produce and supply products that add value to our clients. We grow and learn with them.

The mechanical engineering company with production on conventional and CNC-controlled machines With a large network of manufacturing partners and suppliers, we have access to an extremely large number of manufacturing methods, as well as processes, CNC machines and thus always free capacities and secure supply chains for your projects, which range from prototypes to series production and we have ours Support projects on schedule. Such a large spectrum allows both large components, as well as the smallest components, to be manufactured with the highest precision. You benefit from individual offers, short delivery times and competitive prices that we pass on to you. We have experience in processing a wide variety of materials. The materials are procured exclusively from qualified suppliers. A constant examination of the latest production technologies and materials enables us to recognize innovations and implement them for our purposes.

Consultancy, prototypes and series parts For more than 50 years Sass-metal manufactures drawing, deep drawing and bending parts especially for the rubber processing industry. After the experience gained we support at an early stage of development very strictly to our clients in the development and improvement of rubber-metal parts. With the help of in-house design (SolidWorks) the designs can be quickly implemented in tools and prototypes in our own tool. Already in this phase is taken by using a robust quality to mass production techniques. For series production will be built depending on the part geometry insertion progressive or transfer dies. In the part surface (oiled, washed or provided with corrosion protection) take note of the special requirements of vulcanization. As the base material cold and hot bands are used in the thickness range between 1 and 5 mm. To meet the need for lighter components, we also process steel up to 600 N / mm ². Articles of our production, please refer to: Air springs, Metal rubber elements Vibration elements, Hydrobearings, Chassis suspensions, Motor bearings and Machinery bearings. Our range includes: Butted and clinched rings as a substitute for pipe sections, Support rings, Reinforcement rings, Pole plates and flywheels for the electrical industry and Fußkufen for the furniture industry The initial sampling and ensuring the quality in series production takes place according to the established in the automotive industry standards. We are certified to ISO 9000:2008. We look forward to your inquiry.

Who are we? EM-POLI LTD was created in Kystendil Bulgaria in 1995 as a trading company, supplier and distributor of domestic products for the construction industry. After creating a successful commercial network, we opened our first manufacturing facility. We gathered our team of engineers and set up a production line for paint rollers and hinges, which lead to excelling in all different types of metal fabrication adding many products to our portfolio with time. As our assets evolve, we started producing custom parts for many different industries. What we do? Our company offers assistance in manufacturing, assembly, final packaging and shipping of sheet metal products produced to client’s needs and desires. We design and manufacture the tooling needed for cost effective and fast production of the desired parts for our clients and supply them in time for their needs. All of our tooling is made by the highest standards using the best materials in order for get the precision and longevity needed for mass operations. We have successfully produced 3000000 parts in 2022, which needed more than 10000000 operations to complete. What we have? Our factory in based in Kystendil Bulgaria. We have a 8500 m2 facility for our production and warehousing operations. We have over 23 power presses, automation lines adapted with decoilers and automatic feeders for very low cost and high production operations.

RTA Technik GmbH from Lampertheim uses state-of-the-art equipment to produce high-quality sheet metal and pipe components, which are used, among other things, in the commercial vehicle industry.

Menegon Sp. z o.o. offers a range of dust extraction and filtration equipment and a broad range of high quality sheet metal processing and welding. Menegon have been manufacturing quality products for over 25 years. We continue to innovate and exceed customer demands with new and updated products and possibilities.

Today Centrometal d.o.o. persistently is underway to become a leading Croatian thermotechnical equipment constructor. Accent at development is pointed to the equipment which use renewable energy sources (wood, pellets, wood chip, sun…) thus the company is actively involved in protection of the environment and effectively use of energy.

Powder coating, chrome-free surface pretreatment of 7m aluminum profiles acc. Quality associations, passivation, stripping, fine plaster, blasting, sweeping, assembly work, aluminum profile coatings ___________________________________________________________________________________________________________________ Bending pipes made of various metals and non-metals

Sheet metal work in steel, aluminum and stainless steel as a simple cutting, punching and Kant part or as a complete assembly. Flexible and efficient working to deliver a prerequisite to quality with us on short notice and on schedule. Punching: 3000 x 1500 x 4mm (steel & aluminum) 3000 x 1500 x 3 mm (stainless steel) Edge: 3500mm 1300kN Welding: TIG, GMAW, Stud & Spot Welding Special: Tool cabinets for punching and bending tools from our own production In cooperation with other companies, we also offer laser cutting, powder coating, pickling and passivation of stainless steel and electroplated zinc.

Our Company For nearly 70 years the company Gebr Unglaub + Co. GmbH produces metal goods. One year after the company was founded in Niefern at Pforzheim by the brothers Friedrich, Hans, Heinrich and Otto Unglaub already follows the company's first expansion by opening a branch operation in Zeutern in Bruchsal. Business purpose of the two companies is the production of turned parts. In 1940, a tool and fixture is affiliated with Production machines for the production of cold forged parts. The company also established with this group of products on the market, so that the further diversification nothing stands in the way. The establishment of a metal spinning and fabrication shop in your own home allow for the non-cutting shaping the extruded parts as a third product variant. The following years are the expansion and stabilization of the business, that is by using the latest technologies and well-trained professionals, for the production of parts of the highest quality and precision today. Our objective is always to find solutions together with our customers to produce and, therefore, contribute to the creation of competitive advantage high quality products as part of an optimized production process. Our program Our production program includes: * Technical extrusion and stamping parts * Machines and CNC turned parts * Paint Cups * Tool and fixture manufacturing ... and of course everything with full-service brand Unglaub. Our products Wherever you can imagine the use of forged parts made of aluminum and copper, we can offer you solutions. We have a very high degree of vertical and are fixed with our products either on specific industries or specific applications. Our custom manufacturing in connection with the development and production of the necessary tools gives you the advantage to move parts of your problem-solving processes to us your suppliers and specialists in this field. Take a look at our product range: * CNC Turning * Fließpressteile * Filter * Color Cup * Pressure Vessels * Also Turning we do NOT mass produced, but have moved us here on the production of high-precision parts according to DIN or factory standard. We work on almost all metal materials, including a variety of stainless steels. Another field are our color cup and pressure vessels, which we can depending on the application in different sizes and both aluminum and stainless steel provide.

P&M tools construction is a young company that was founded in 2018 by two mechanical engineers with many year od experience. The company was founded to offer the market new conceptual solutions, as well as to contribute to the development of the auto and machine industry. In addition, we deal with tool making, modeling and programing. We offer welding of complex assemblies as well as laser cutting of materials.

Manufacturer of punched, bent and drawn parts. Sheet thickness of 0.3 - 5.0 mm. Development partners from prototype to series part. Our own tool shop manufactures complex transfer and sequential tools.

With 10 years of successful company history and extensive know-how, Damatech Company is a dynamic Steel Service Center focused on products and solutions based on pre-hardened steel grades such as Toolox, Hardox, Strenx, 42CrMo4 QT and 1.1730. From the very beginning, we have worked closely together with our strategic steel supplier SSAB, a market leader in the field of high-strength and wear-resistant steel grades. As a specialist in the distribution, storage and processing of pre-hardened steel for a wide range of applications, we focus not only on individual orders but, above all, on long-term customer satisfaction and reliable performance. As a future-oriented company, we continuously invest in the improvement and expansion of our offer. Our advanced processing capabilities include band sawing, CNC machining, waterjet cutting, laser cutting, plasma and oxy-fuel cutting, as well as bending, enabling us to deliver precise, efficient and customized steel solutions.

My name is Maria Sreic, and I represent small Serbian family firm MAG CREATIVE doo, a company specialized in metal processing and fabrication, based in Vrnjacka Banja -city in Serbia. We are reaching out to explore the possibility of establishing a sub supplier partnership. With years of experience in precision metalworking, welding, and custom fabrication, we have supported companies across various industries by providing high-quality components and solutions tailored to their specific needs. We believe that our technical capabilities, production flexibility, and competitive pricing could be of value to your operations. We would welcome the opportunity to introduce our services in more detail and discuss how we could support your projects as a reliable subcontractor. In our 5000 m2 production place, we have CNC , NC machines ( drilling machines , milling machines, borverk machines, cutting shears,plasma cutting,laser cutting, bending press, grinding,etc.. ) and 30 welding machines. Beside of all during the past 8 years our firm producing sub-constructions and complete assembled containers for the different use in industry. I must mention that more then 80% of our production is going for the foreign market, so we have a very good export position and more then 25 years of wok experience. . You can see more info about us on our web site: www.mag-creative.rs We look forward to the possibility of working together. Warm regards

Our company was founded in 1992 as a vehicle and metal construction company. From the outset, manufacturing components was part of our core business. At both civilian and military levels, solutions for every application were designed in-house and produced in all materials. From prototype construction to medium-sized series, everything can be realized at our location.