Processing of sheet metal parts, sheet metal and welding constructions, pipes, pipe constructions and hydroforming profiles, etc. by 3D laser cutting and 3D laser welding in steel, stainless steel, aluminum and other materials on request. Oxide-free laser contours in stainless steel by high pressure cutting with nitrogen. 2D laser sheet metal and sheet metal structures, with the lasers of small holes in the thicker plate area is not a problem for us. As well as 3D laser tubes and rotationally symmetrical sheet metal parts in steel up to 15 mm, stainless steel up to 8 mm (oxide-free) and aluminum up to 4 mm. Of course, we can also-supplied data sets are in various formats, read.

The Spaleck GmbH & Co. KG is a medium-sized, coming from the engineering company, founded in 1869, located in Bocholt. Our company is family-run by the fourth generation. We currently employ approximately 135 employees at the site Bocholt and approximately 12 employees at the site Greiz in Thuringia. At these sites, we have a turnover of € 18 million. Contract manufacturing has increasingly gained in importance in recent years and this factor is well over 50% of revenue. In particular, the close cooperation with various gear manufacturers has helped us in recent years to considerable growth. For several years we have been certified according to DIN ISO 9001. Modern machinery, considerable investment and motivated and qualified employees meet these requirements. We currently focus both in the field of mechanical and sheet metal technology to the production of small to medium-sized workpieces. A close cooperation with various customers enables us to invest in state of the art machining centers for large parts and thus a significant development. We have recently made a decision to invest in three MAZAK turning-milling centers that take us from January 2010 in the position to manufacture large parts in high quality. These machines can process workpieces up to 2300 mm in diameter and up to 7000 kg deadweight and also perform milling operations with large distances. There are 3 type aircraft MAZAK Integrex e-1850 V. supplemented these machines by a 3D measuring machine.

Calculation, design and sales of springs (extension springs, compression springs, torsion springs, spiral springs, wire and flat molded parts, bending parts and assemblies) of round, flat and square wire. Springs: - Wire thicknesses up to 3.3 mm (round / flat / square) Applied end turns or open - Ground end coils or unprocessed - - All winding body geometries feasible (cylindrical, barrel-shaped or waist, Beehive, Taper) Extension Springs: - Wire thicknesses up to 2.8 mm (round / flat / square) - All possible Ösenformen feasible (incl. DIN) - With adjustable internal bias voltage (eg to achieve digressive characteristics) Torsion springs: - Wire thicknesses up to 4.5 mm (round / flat / square) - All leg shapes feasible - As a simple torsion spring, double torsion spring, torsion spring quadruple Spiral springs: - Wire thicknesses up to 3.0 mm (round / flat / square) - Windungsverlauf freely adjustable - With or without molded legs - All possible Ösenformen feasible (incl.DIN) Wire and flat springs: - On winding, coiling, bending centers of brands Wafios, Itaya, Simplex Rapid or BIHLER - Wire thicknesses up to 4.5 mm (BIHLER up to 10mm) Coils: - Wire thicknesses up to 4.5 mm - From enamelled copper wires with stripped and tinned ends - RF coils of silver-plated copper or bronze wire Stampings: - Bandwidth up to 120mm, thicknesses up to 10mm - Additional Technologies welding, threading, bolting our BIHLER automata - Assembly of components including processing of supplementary parts (plastic parts / screws / wire springs, etc.) - Tubes of strip material with and without slot, tape ends clinched or shock Manufacturing technologies: - Winde-/Wickeltechnik - Stanz-/Biegetechnik - Grinding of spring ends - Shot peening - Heat treatment - Surface Technology - Setting and testing - Isolation & automatic packaging All manufacturing technologies can be linked if required! Materials: - EN 10270-1/-2/-3 / / EN 10151 / / etc. - Copper, beryllium copper, bronze, brass, copper alloys, etc. - Cr / Ni steels and duplex steels - Surface-treated and plastic-coated wires - Composite materials RIBE has its own tool and a house plant! Development & Construction: - CAD with interfaces to all major 3D CAD programs - Spring calculation software - FEM analyzes / FMD possible Certifications: - DIN ISO 9001 - ISO / TS 16949 - ISO 14001 - OHRIS Connection technology: Screws as drawing parts, Pleulschrauben, motor screws M2 - M24, cold formed parts, rivets production quantities of 50,000 pieces We look forward to meeting you!

Our company specializes in tools for solid cold forming. We mainly supply screws manufacturers, furniture and automotive industries with CASE tools of hard metal. An overview of our facilities. Flat grind ·, clamping 300 x 600 Outside round grinding · D 290 x 500 Inside round grind ·, D 220 x 120 Depth unilaterally Milling ·, X 200, Y 390 way · CNC turning, D 190 x 500 · Erode, 2 D, X 290, Y 360 clamping Profile grind ·, D 100 x 150 · Hardening furnace up to 1200 ° C · Manual workstations for polishing surfaces Furthermore, for years we work with reliable partners in the field - Die sinking - Coating (CVD, PVD) - Special hardening process together

We have capability for design and production of welded metal parts which they are made from sheet metal , pipe and various metal profiles including Laser cutting of sheet metals.

Scheiner sheet GmbH Sheet metal working at the highest level. Specializing in stamping technology we are your partner for sheet metal parts of all kinds. Whether item or large series. With one of the fastest punching machine ever we are at the pulse of time and can both prototype and mass production process them in the fastest possible time. Machinery: Punching / nibbling trump TRUPUNCH 5000 Trumpf press brake V50 More info coming soon! For questions please contact us at any time. Scheiner Markus

Our professional quality and technological equipment make our company capable of producing both carbon steel products and stainless steel products. Our machinery without any claim to completeness: CAD programs, CNC edge benders, hydraulic and eccentric presses, automatic cutting machine for plates and long goods, simple machining technology, robot with robotic arm, welding machines for every welding process.

The ISAF Group began its consolidation in the year 2007, with a takeover by the current management, which has continued to invest over the years, acquiring other companies of the group. The ISAF Group currently consists of several autonomous corporate structures, mainly specialized in the processing of sheet metal, each being equipped with the latest technologies. The Group enhances the experience of its staff with constant training and updating, keeping up with the best manufacturing techniques, increasing professionalism gained through previous work experience by adding to it ISAF’s skills and expertise The Group's philosophy has allowed the development of consolidated relationships with its customers, providing an updated, responsible and on time service, able to support a diversified production. The Group also cooperates with selected suppliers to guarantee the availability of the best raw materials and the achievement of the required objectives, according to high quality standards.

MSB device technology - Your partner for sheet metal design, sheet metal processing and equipment For 20 years, MSB device technology is a strong partner in the field of sheet metal design, sheet metal processing and assembly for its customers. design on more than 2,000 square meters of production and warehouse space and we manufacture both complete metal housing, front panels, busbars and entire assemblies and simple sheet metal parts for our customers. Using our modern machinery, stamping, laser machine and CNC bending center includes, we can respond flexibly to customer requirements and offer the prototype to series production services around the sheet metal processing. Short lead times and best quality are our claim to the products we manufacture. Since 1996 we are certified according to DIN EN ISO 9001 certified. Upon request, we also supply fully assembled and tested modules to our customers. Convince yourself of our performance and quality.

Based on our 18 years of experience in the industry, we established our company in 2016. Our company has increased its bench park and the number of employees over time. It aims to achieve the understanding of quality in production.

The experts in our metal construction company MUTEC GmbH in Friedberg near Augsburg will be very happy if they can help you competently and reliably as your reliable supplier and partner in the field of sheet metal processing industry. Our company was founded in 2002 by brothers Salih and Vedat Mutlu. INDIVIDUAL PRODUCTION IN THE AREA OF SHEET METAL PROCESSING A young, dynamic team awaits you with us, which, well attuned and committed, manufactures products according to your specifications: Benefit from our high-performance production potential in the field of sheet metal processing! Our experienced employees offer and guarantee you competent advice, flexible, quality-oriented and timely production of your orders and their timely delivery at all times. Our qualified employees can also draw on their many years of experience in the production of systems, including assembly, made of stainless steel.

Franz Schürholz GmbH is an owner-managed family business in the third generation. In 1946 Franz Schürholz founded the company in Menden. Initially, household goods, kitchen appliances and agricultural supplies were produced. In the following decades, the company developed into an innovative partner in the cold rolled profiles and stamping products divisions. Today, our products are as diverse as our customers. Industries from A to Z rely on the quality of Schürholz: automotive, construction industry, fitting technology, electrical and filter technology, crane construction, shopfitting, lighting industry, mechanical engineering, furniture and office furniture industry, connection technology and other future industries. Continuous growth required the continuous expansion of production areas and the relocation from Menden to Wickede - the current location of the company. Here, 30 qualified employees using high-quality materials and the use of modern machinery guarantee the recognized quality of our products.

We are a small company in beautiful Baden-Württemberg. With a young team and a lot of expertise, we have specialized in steel processing.

In its 30th anniversary year, shoptec is strengthening its production site in Csót, Hungary, with investments worth millions. Among other things, an additional third laser system from Trumpf with 8 KW output and another press brake will be installed in the coming months. A wide belt grinding machine with automatic deburring and edge rounding has already been put into operation. With this orientation, shoptec consolidates its position as a reliable and high-performance partner for industry. Especially the stainless steel production is strengthened by the new investments, after the production areas steel and aluminum processing were already expanded in the last years.

Welcome to KOCHs Tooling Family-owned company and system partner System partner with full service, more than 50 years of experience and state-of-the-art machinery, tool and special machine construction, series production and tryout — KOCHs Tooling offers a complete range of certified quality services. With the consistent CAD and CAM structure, from 3D design and work preparation to production and assembly, we guarantee maximum efficiency, even for small quantities. We develop, design and produce flexibly and cost-effectively — from individual parts and assemblies to devices and special machines in steel and non-ferrous metals. As a family business, we have continuously developed on the basis of our experience. In this way, we combine continuous innovation with a long-standing tradition, which is expressed in our value orientation. Personal proximity to our customers and partners is just as important to us as responsibility for our employees and the Wuppertal location, where we are now in the 3rd generation of work.

We are an experienced company with modern machinery and qualified employees. We produce individual parts, small and medium-sized series of sheet metal cuts and bent parts. Made of steel, stainless steel, copper, aluminum, brass and special materials. Assembly production and surface treatment complete our offer. According to your specifications, we produce in high quality, at short notice and on time.

Our company in Delbrück stands for quality and reliability Since the new company was founded in 2018, we have committed ourselves to this goal: the complete satisfaction of our customers. If you too would like to make use of the services of a master workshop for metal processing and laser cutting, you are welcome to join us. There are currently 15 employees working in our company. They all have solid education and extensive experience. So you can Be sure that all work from are carried out by qualified specialists when you engage Marks Metall GmbH.