Our company specializes in sheet metal- and profile processing. The latest CNC technologies, software and productivity helping us with high productivity to advance. We offer document processing, laser or water cutting, bending, welding and surfacing including reliable delivery. In addition, we offer experienced German speaking welder, pipe fitter and foreman for pipe assembling. Our employees gained experience on various construction sites throughout Europe, see below www.industriemontage.sk. Our products match with the strictest European standards. The company is certified with ISO 9001: 2015. The main aim of our company Industriemontage is the satisfaction of our customers, especially with the quality of the manufactured products, together with just in time delivery. More about us can be found on our website: www.industriemontage.sk

Company ZUT "PROJEKT" offers services in: Processing of metal - milling, turning, Inen and outer grinding, Surface grinding, cutting, welding - steel, aluminum, stainless steel, Engineering, manufacturing spare parts and machine elements We offer: - Turning - Automatic turning (bar) - Hard roes - Milling - .... etc.

With our experience in various casting techniques and finishing processes of various casting, we have been active in the market for more than 40 years. We support and relieve our customers and offer the possibility to deliver a complete product, from processing to after-treatment. Our mission We focus on designing, manufacturing and delivering a total package of products. You can call on us for small and large work, but you can also use a certain processing or finishing process for your products. We are happy to be your adviser and partner for all your castings, whether it is a single piece of product or a larger series of products. We cast, melt, rotate milling, assemble and construct your product exactly as you wish. We place high demands on our quality. With us, a product does not leave the warehouse until it meets all the requirements regarding the mechanical properties and conditions. That way you can be sure that you will receive the highest quality at a competitive price.

The präzimat Precision Engineering GmbH is a modern and a traditional company with over 50 years experience in the manufacturing of precision turned and milled parts according to customer drawings. A pronounced zero defects culture, lean on value focused processes and Just In Time delivery concepts make the präzimat Precision Engineering GmbH to a powerful partner for demanding customers worldwide. Our quality management is certified according to DIN EN ISO 9001:2008. Our company is located near the world-famous watches Glashütte / Sa (8km) and in the immediate vicinity of the Saxon capital of Dresden (25km).

SINCE 2009 .... The company was founded in 2009 by Mrs. Bettina Landgraf-Kaiser, storage capacity today is about 3000 m² in three halls. As a leading warehouse distributors constantly about 100 cars and well-preserved machines of best brands offered. State of the art warehouses with crane capacity up to 10 tons and forklift capacities up to 7 and highly trained staff are the benefits for potential customers to find the "perfect machine". Complete "all-inclusive" packages (eg transport, introduction, installation Complete training) are developed and implemented according to your. MEMBER OF: Since 2009 FDM - Germany Since 2009 EAMTM - Brussels (International) SPECIALITY: Cutting metal-working machines Our specialty is the trade used machines from metal cutting. Whether conventional or CNC - controlled, we each offer the right machine for you.In CNC - area we act almost exclusively with the control type Fanuc & Heidenhain. Here we can give you the best - provide service, whether coverage with qualified staff, service staff or software solutions. OTHER: Furthermore, even spare parts - remakes produced directly in the house with us. Through years of experience of our employees in the cutting process on Fanuc & Heidenhain controls, we can therefore offer cost effective replacement parts alternatives you.

The Gerberding GmbH is the specialist for CNC turned parts and CNC milled parts for prototypes as well as for small-series production. With our extensive Power spectrum, we position ourselves as a holistic system supplier of CNC machining.

LOGA precision parts GmbH & Co.KG The specialist for long turning parts with deep-hole drilling In the midst of metalworking region Heuberg - Lake Constance in Denkingen / Baden-Württemberg, we produce CNC lathe parts ø 1-32 mm from all gngigen materials. Specialities include: Long turned parts with deep hole drilling up to 170 mm, made on the lathe turned parts in surface finishes down to Ra 0.25 in a Aufspannng on the lathe manufactured smallest parts complete processing for pre-finished DrehteileLOGA is as competent as for specific solutions in small batches as contacts for high volume parts. Our philosophy is tailored to you The philosophy of LOGA is to support the customers from the development actively to series. Whether feasibility analysis, cost optimization, tolerancing, or logistic service - LOGA to support you at every stage of cooperation. If it is urgent, we also like our flexibility Proof: LOGA will not let you down. Our mission statement is: Through communication to partnership solutions. To account for the high demands of the market, all parts are tested when goods again at LOGA. In LOGA unnecessary costs from the outset be avoided. Because only the customer satisfaction ensures our survival.

Imar is a company in the metalworking sector that believes and invests in people and relationships. Our Vision: We want Imar to become a perfect model of sustainability in all fields. We want to help create a better world where products are created with the minimum waste of resources and at the same time with maximum quality. We aim to free man's time from all non-creative activities. Our Mission: We create maximum value for the customer by taking the responsibility of serving them with punctuality and quality. In carrying out our service we analyze waste to continuously improve the process by automating and digitizing all repetitive work. Our Values: Responsibility, Growth and Competence, Respect and Loyalty; these are the values that determine Imar's way of doing business. We require and promote respect for our Values, with the aim of consolidating our relationship of trust with all Stakeholders: collaborators, customers, suppliers, partners, local communities. We combine the principles of economic management with those of respect for the person and the environment in which we operate, for the sustainable development of the company, within a path of constant growth and responsibility. We continue to invest in technology and know-how to provide an increasingly better service to all our stakeholders. The strengths are: Flexibility, Technical skills, Speed, Complete metal processing service

We manufacture various plastic components individually according to your wishes and requirements, as well as support you with our know-how in the planning and implementation of your project. With our various processing methods, we have the possibility to carry out the entire component processing. Alternatively, we will be glad to assist you in subsequent work such as contour adjustments or deburring of existing components.

3DM Srl. is a young company (founded in 2006) with 30 employees. Specialized in mechanical processing - milling and turning - 3DM has an innovative machine park and is active in many sectors: above all in mechanical engineering (packaging machines, transport systems) as well as automotive and automation. Regular customers include well-known Italian companies such as IMA, GD, Coesia Group and many more

A Czech-growing small businesses (20 staff) offers its services in the metal working, equipped with modern machine stock. - CNC milling - Wire EDM - CNC Turning - Drilling - Grinding, etc. We process Alumunium, steel, brass, copper. We provide the best price, highest quality and reliable deliveries.

Kovinski izdelki Hrast d.o.o. is a well established and experienced precision engineering company manufacturing millions of precision CNC turned parts and machined components to customer specifications. Since 1985 we supply precision machined components from 2mm to 52mm diameter to many diverse industries worldwide. With continuous investment in the latest technologies whilst maintaining our traditional capacity and skills, we can compete in volume with emerging economies but with the backing of European sourced materials, full traceability, and friendly and efficient service. This, alongside the latest cleaning, inspection equipment and highly skilled workforce, makes Kovinski the ideal choice for all your subcontract needs. Process organization of the Kovinski izdelki Hrast d.o.o. complies with the guidelines of IATF 16949 technical specifications.We are using lates measurement equipement to enshure to be able to measure microns. We are using contact and non contact measurements methods.According to costumer needs we can offer 100% control with cameras, SPC anaysis of measured dimensiones and CMM measurement of complex geometries. We ensure full traceability from raw material to finished components. Creating dedicated component-specific quality plans: - Producing bespoke gauging - Supporting machine capability SPC - Using non-contact optical measuring equipment - Creating FMEA, process capability and full PPAP level 5 documentation when required - Allowing IMDS entry - Providing certificate of conformity with every delivery We produce precision machined components from 2mm to 52 mm diameter. Our customers are from automotive, electro, white goods, hydraulic, pneumatic and machine building industries. Using up to date production and quality equipment we can offer machining of parts from different raw materials like: Stainless steel (austenitic, ferritic, martensitic) Aluminum (bars or casted parts) Carbon and hardened steel (ETG, forged steel, steel for heat treatment) Brass Products for automotive industry. - sensor housings - screws - pins - pivot pins - shafts - connectors - bolts - washers - bushes - nuts

PCL Zerspanungstechnik is a family business that has been in existence for 20 years and is active in the contract manufacturing of CNC manufactured components. We turn and mill a wide variety of materials such as steel, aluminum, brass, tool steel, Hardox, etc. Our core competence lies in the production of small series as well as individual parts according to customer requirements. The programming is carried out using a CAD-CAM system, which means that we can also produce complex geometries efficiently. We also work with companies for further treatment, such as galvanizing, hardening or barrel finishing and can also make you an offer in this regard.

You would like to make metallic components additive? Are you interested in the possibilities of this technology? With the additive manufacturing of 3D-printing metal (SLM, Laser-cusing®, DMLS etc.) we offer you a production technology that is no longer used only in prototype production. This process offers completely new possibilities where conventional processes such as laser cutting, turning or milling reach their limits. This is a process that is used exclusively for the production of metal. As with 3D printing, the components are built up by layer-by-layer build-up and fusion of metal powder; the component has almost identical mechanical properties to the original material. You need support in implementing your automation project? Then you are exactly right with us! We realize complete manufacturing cells according to your idea. From the feasibility study on the construction and assembly to commissioning and on-site support, we are the right partner for your project. In particular, we cover the following areas of responsibility: - Project Management - Programming - 3D printing metal (additive manufacturing) - Security management - 3D scanning - Milling technology - Construction - Assembly - Hose packages - Service - Training Our 3D metal printing services at a glance: - construction work (cooling ducts, component optimization, etc.) - Checking the cooling channel design (flow simulation, thermal images, flow analyzes) - coatings - Plastic prototypes - Component measurement - Creation of plastic models - 3D scanning / reverse engineering - fine machining (milling, grinding, eroding etc.) - Surface treatment (anodizing, electropolishing, etc.) - hardening - welding

Baratec is a company in the metal processing and machining industry. Our focus is on turning and milling technology and the development of special solutions for our customers. For a decade, Baratec has stood for the highest quality and flexibility. By constantly optimizing our individual corporate resources, we are always in a position to meet changing new market requirements, also from the point of view of profitability. to meet the requirements of our customers is our top priority.

We are a plastic manufacturing company which deals since 1982 mainly with the welding of thermoplastics (PP, PE, PVDF, PVC, ECTFE), with mechanical machining of plastics and processing with acrylic glass (PMMA, polycarbonate). Our focus during welding of plastics, components and assemblies for the solar, photovoltaic and semiconductor industry. In addition, but also the container and apparatus for exhaust air and waste water treatment industry as well as any custom or special equipment. From small weldment to Baugruppenverschweißung here goes our spectrum in the hot gas welding process. Of course, with certified welders and specialist registration! For the mechanical processing, we have a large machinery available in the main, deals with milling and turning parts made of plastic. With our 3-u.5-axis milling machines we are able to produce for you according to your specifications and desires in a position the most complicated parts.Furthermore, we can edit our portal milling machines with vacuum clamping plate sizes up to 2500x4000mm. Even in our acrylic glass processing (PMMA, PC), we have a wealth of experience and are thus a strong partner in the fields of engineering, trade fairs, special equipment manufacturing and all other possible single, serial, and special parts. In addition to bending and gluing, we have recently become a flame polisher with which we can polish but also hard to reach places brilliant for you all edges. Please send us your request, we will respond as soon as possible. A careful design of all offers we can assure you already.

We are a young, zuverlässigesr partner in the field of machining. In turning, milling, additionally to the decorative surface grinding, we cover the production of small and mittelbroßen series. Our documented down to the smallest detail manufacturing processes, we are the ideal partner for the processing and production of recurring parts. We edit jegleich types of plastics, non-ferrous metals, steel, stainless steel, castings up to Titanium. Through our in-house fixture, the machining path is optimally adapted to the production.

BFT is a company born in 2008 from the passion of two brothers for the mechanical sector. Specifically, the company deals with milling for the following sectors of application: - special machines (operating) - aeronautics - medical The company is young and has a modern and cutting-edge machine park that allows it to develop even very complex and elaborate components.

We are a machine manufacturer with over 18 years of experience in manufacturing technical parts for various industries in the Czech Republic and abroad. Our focus is on producing smaller series. We also offer complex services for every sector.