Our services - CNC milling - welding - turning We work in all kinds of plastics - PP, PE, PEHD, PVC etc. At AMARGO®, we focus on professionalism, honesty and flexibility. We make world-class chemoresistant devices that they have a wide range of applications - from water storage to complicated security, dangerous chemical processes.

No job too small, no project too big. We see ourselves as an outsourcing partner for any company and any order. We focus on customer requirements and meet your requirements with maximum flexibility. Always aiming to exceed your expectations. Our services in detail: Surface light inspection Assembly Assembly Development of individual solutions 3D printing Die-cutting of adhesive tape / foam molded parts

We are a motivated and competent team in the field of milling, welding and assembly. Our company was founded in 2016 and currently has 8 permanent employees, which can be increased to more than 20 employees if necessary. The company's headquarters are in Sumperk, in the north-eastern part of the Czech Republic. Our employees can be deployed 24 hours a day for your needs.

Company has used its long-standing knowledge and experience in civil production sector as well. The main part of civil production covers: welding of structures, their machining and assembly into final products such as traffic, constructional, handling and agricultural facilities. In 2004 more than 80 % of civil production had been made for foreign companies mainly from Germany and Great Britain. Continual investment into advanced machine holding, production workshops, experience of our businessmen, technicians, workers and very good relations with our customers are very good conditions for further development of co-operation production development. Over the last year there has been turnover of 2,5 billion CZK and positive profits. Currently there is 950 employees. Supervision of management, prescribed product properties and parameters are guaranteed by permanent quality control. The company has been certificated in accordance with ČSN EN ISO 9001: 2001, and AQAP 2110 standard and process of welding according to ČSN EN ISO 3834-2:2006 standard both connected with the company informational system. The company is a member of the Economic Chamber and a member of Czech NBC Team aliance (www.nbcteam.cz) operating under the patronage of Czech Trade - the national trade promotion agency. International highway routes, railway service and nearby international airport enhance company international business/co-operation. VOP 025 is situated in the middle of a large industrial region with a lot of companies able and ready to co-operate. Production of engineering parts of building and handling machines, production, cutting, machining, welding, assembly and painting. Welding certificate according to the EN 729-2

USE THE EXPERIENCE OF A COMPETENT PARTNER Whether single or series production, we respond flexibly to your individual needs. We manufacture precision parts from all machinable materials, such as aluminum, brass, steel or stainless steel and various plastics. Our services cover the areas of the parts - production via surface treatment on to the assembly of components or units. Of course, we design and produce special tools, special machines that are controlled electrically, pneumatically or hydraulically and complete equipment for you. Sämmtliche of us delivered products are quality tested according to the wishes of our customers. Ask us, we can advise you and provide you with a not binding offer. Our contact address can be found here. Under the heading manufacturing capabilities, we present an exemplary selection of mechanical parts. The products we manufacture are components for the high-tech industry. The objects shown are in unterscheidlichsten Indutriezweigen such as aerospace, dental technology and mechanical engineering are used.

Our production capabilities: - CNC turning and milling center for complex machining Thread rolls / rooms / sandblasting - Grinding (centerless, cylindrical and surface grinding) - Deep-hole drilling Our strengths: - Quality - Advice and support of our customers - Solution orientation - Extensive experience - broad know-how - Fast project implementation thanks flexiebler applications - Manufacture of complex parts - Modern machinery - Environmentally sound management of all processes

The “PROMMING Čakovec” company was founded in 1990, and has developed to one of the leading manufacturers of store and warehouse equipment, as well as office furnishing in the domestic market. The company currently has a workforce of 120 people, out of which a 100 people work in the production process.Production program of the company covers a very wide area - equipment for shops and warehouses of all the capacity and purpose, and interior equipment. The metal processing line covers a wide range of production processes in metal fabrication: 1.the sheet metal slit is done on the automatic line for both the longitudinal and lateral slit which is dimensionally adapted to the needs of further processing, whether it be profile fabrication for warehouse systems or equipment positioning for stores 2.the cutting out of position layout is done on CNC machinery and on the laser cutter; this technology represents the very top of metal processing and enables us to manufacture various shapes and forms, with maximum production flexibility concerning dimensions and quality service 3.the sheet metal is bent on the whole series of machines adapted so we can cover all market needs – from individual positioning to serial production: the line for continuous bending of profiles represents our base technology, and is used for: manufacturing of profiles for all warehouse systems; those lines continuously produce profiles cutting them to the appropriate length, specified by the customer manufacturing of shelves and trade system equipment backgrounds, which has high rate of production, while still staying flexible on the level of each product bending on the sheet metal benders is used in cases of small series with high flexibility in position measurement bending on the CNC bending machine wire products are produced on the CNC machine the welding of positions is done both by welding robots and manually: the welding robots are used for position manufacture of our warehouse program, meaning all positions which are produced in large series; this technology ensures production of high quality identical positions manual welding is done by qualified welders with longtime experience in manufacturing warehouse and store equipment The final position processing is done in our facility by electrostatic plastic or Zink coating; both processes are done on separate lines taking care of both the high quality of final processing and ecological ethics: the plastic coating of positions is done on two separate line which enables a capacity of manufacture; the process of plastic coating consists of chemical treatment and preparation of the positions for the painting which is done by robot, after which they are baked in flow ovens; the paint is applied in special booths which enable color switching within 10 minutes, further ensuring a broad range of colors of our products; the heating of the lines is done by warm air heated by an oven fueled by biomass; the bake oven uses thermo oil as a medium, which is a new technology developed for our purposes; this technology ensures the energy for all our processes – from the plastic coating lines

The company UKM Vehicle Parts GmbH has specialized in the production of precision parts with a high technological content. Through our years of experience we have established ourselves as a reliable partner. Our customers are automobile manufacturers or reputable suppliers in the automotive industry.

The range of the company includes specialty engineering, prototyping, the Walzenbau, single and serial production, welding engineering, instrumentation. The special machine comprising according to your construction plans production and assembly of complete plants, including hydraulic and electrical control systems. Translation by Google Translate

Ritter Medizin & CNC-Technik GmbH in Mühlingen near Stockach is an experienced specialist in CNC milling technology. As a reliable service provider, we manufacture high-quality products on behalf of our customers from all common materials that require the highest accuracy. Greatest precision, care, promptly - that's what we live for.

Aero Gama is an Italian company operating in the precision mechanics sector in the aeronautical, railway and naval fields. is equipped with a vast fleet of updated machines with 5-axis machines, gantry machines up to 4000x2000mm of working range, horizontal machines for small and large production batches. the metrology room is equipped according to all iso standards. We also carry out small carpentry and assembly activities, as well as construction of dedicated equipment and machinery.

From planning to production with surface treatment to on-time delivery, we are your reliable partner for short turned parts, long turned parts, component assembly and phono technology. In our special field, CNC turning and CNC milling, we also offer the right products for your requirements.

HISTORY AND DEVELOPMENT OF THE COMPANY Legal predecessor of IRON-TECH Ltd. was established in 1999. The company has been the supplier of international multinational companies. During twenty years of its history IRON-TECH Ltd. has gained a decisive position in the field of metal processing and part manufacture. Continuous development meeting the expanding market demands has been an important part of its business policy. The company insists on manufacturing at top-level quality accompanied with environmentally conscious approach and environmentally friendly technology. The company employs 300 people at 3 sites.

3B FLUID POWER SRL was founded in 2002 from the acquisition of the third-party branch of a metalworking company with a thirty-year history in the sector. Today the company produces cast iron or aluminum die-cast items, hydraulic power units, hydraulic blocks, and aluminum or steel components for automatic machines. MISSION & VISION Respond promptly to market demands, increasing our level of expertise and specialization: a goal that we aim to reach and exceed every day, thanks to targeted technological investments and optimization of all existing resources. Our name includes the hydraulic sector which is now the heart of our production. In the future of 3B, we wish to expand the acquired know-how also in other industrial sectors. THE REFERENCE SECTORS Agricultural Hydraulic Mechanical Automatic machines, labelling Food Automotive Electric motors, gearmotors COMPLEMENTARY PROCESSING We offer the possibility of completing the processing of the product through specific finishes: • Painting • Microphosphating with zinc salts • Microphosphating with manganese salts • Thermal deburring • Galvanizing • Heat treatments for cast iron • Anodizing of aluminum • Nickel plating • Resin or loctite impregnation Today the production plant has a consolidated configuration in industry 4.0 in which we periodically integrate latest-generation machinery. The production is currently composed of: N. 9 - horizontal work centers N. 3 - multi-pallet horizontal work centers N. 2 - vertical work centers N. 3 - robotic islands N. 3 - CNC lathes N. 1 - automatic ultrasonic cleaning system Our horizontal work centers are all MORI SEIKI NH5000 DCG. The vertical work centers are all QUASER. We have chosen to invest in machinery of the same brand and model, to guarantee maximum production flexibility in favor of optimizing delivery times. CERTIFICATIONS Quality and Sustainability are an integral part of our way of operating. The ISO 9001 and ISO 14001 certifications testify to 3B FLUID POWER's constant commitment to improving business processes and responsible management of the environment. ISO 9001 ensures that every stage of our precision machining meets the highest quality standards, while ISO 14001 reflects our dedication to reducing environmental impact.