With the experienced team at HORSTKEMPER, you are in competent hands right from the start. The company's over 70 years of experience provides a strong basis for the success of our customers from a wide range of industries. Good quality and well-founded qualifications are important components of our daily work. As a holistically oriented company, we offer all services from a single source. From planning, construction and project development to manufacturing and assembly to comprehensive after-sales service. And that at any time flexibly, quickly and with tailor-made solutions. New technologies and innovations are constantly being considered. Always up to date, this is how we face the constantly growing challenges of the market. manufacturing Modern machining centers achieve maximum precision and efficiency. From precisely cutting the materials to turning, milling, bending and drilling to the perfect surface, all work steps are carried out directly. Experience flows from production flow directly into the design and form the basis for a high-quality yet economical machine. Right up to the precise assembly, the high level of competence of our employees shapes the production results.

We, the Raskopf company, have been working in tool and mold construction at our location since 1923. It all began with forging dies for the massive forming industry. We have been manufacturing permanent molds for aluminum casting since the 1990s. Here, the production of molds for car wheels has become a special focus of our company. In recent years, however, the proportion of other cast aluminum molds has grown steadily. Our sales markets are Germany and the EU, e.g. Denmark and Austria.

Regionality as a guarantee of success On-time delivery and reliability in project management are in demand. As our customer, you are desperately looking for efficient local suppliers and partners to ensure the ability to deliver your products, services or for your project, taking ecological and economic aspects into account. With our regionally focused service concept, MBL already meets all the requirements of the changing economic and geopolitical conditions through its regionally shaped value creation concept: • Use of regional supply channels to avoid material bottlenecks and to optimize delivery times • Our extensive local network of cooperation partners from the fields of engineering, software development, switchgear construction, etc.as a guarantee for the successful handling of complex mechanical engineering challenges • Holistic, locally concentrated project management, from the conception through engineering to the in-house manufacture of your machines, including all subassemblies - everything from a single source Our performance promise: • Adherence to deadlines, reliability paired with the highest level of quality "made in Germany" • Efficient order and project processing through consistent automation and digitization along the value chain • Use of the latest technologies to implement your product or project requirements • Comprehensive customer support even after delivery / project completion • Low carbon footprint due to short supply chainsas a guarantee for the successful handling of complex mechanical engineering challenges • Holistic, locally concentrated project management, from the conception through engineering to the in-house manufacture of your machines, including all subassemblies - everything from a single source Our performance promise: • Adherence to deadlines, reliability paired with the highest level of quality "made in Germany" • Efficient order and project processing through consistent automation and digitization along the value chain • Use of the latest technologies to implement your product or project requirements • Comprehensive customer support even after delivery / project completion • Low carbon footprint due to short supply chains

Your supplier for complete and component manufacturing Our company employs in Bautzen approx. 100 employees and is primarily involved in machinery and Works in plant engineering. We have a Machine park for mechanical processing, which Chipless design, a powerful welding shop and surface treatment equipment. Well-trained and committed employees ensure for ensuring that the products/products are always from high quality and on-time delivery to our customers be delivered. AFT Förderanlagen Bautzen GmbH & Co. KG is certified in accordance with DIN ISO 9001:2015. Our experience lies in the Development, planning, production and assembly of Systems, components and parts for the general mechanical engineering, steel construction, the Sheet metal construction, special machinery and plant engineering and in series production.

The Anton founded in 1889 Tränkle GmbH & Co KG, based in the Black Forest is an international family, which developed and produced for various industries precision turned parts, valves and assemblies. At the sites in Triberg and Elzach over 1,000,000 components up to 65 mm in diameter are daily in 3-shift operation, manufactured in the most modern and most economical production environment. Are processed materials such as brass and aluminum, but also cutting steel, stainless steels and special alloys.

Dear Sir or Madam , for a new cooperation partner in mechanical processing, we would like to introduce ourselves to you as a company. The FIBER-TECH management covers contract manufacturing for mechanical machining of structural steel, tempered steel to stainless steel, machining of aluminium alloys, brass, grey cast iron and plastics in turning and milling. Our machine park is equipped with 5 axis milling centers as well as 7 turning-milling centers with which bar and chuck parts can be manufactured from small to large series. For further machining processes, such as coating, gear cutting, hardening, laser cutting, etc., we work closely with regional partners. Our company is DIN EN ISO 9001 certified. In order to ensure the high quality standards, we work with 3D measuring machines and measuring projectors in our quality assurance in addition to the standard testing equipment. The company FIBER-TECH Management is located at Tuchscherer Straße 15 in 09116 Chemnitz in the industrial park at Jagdschänkenstraße with a very good connection to the freeway A72. Our team consists of 20 employees and is structured as follows: - 1 plant manager ( businessman ) - 3 work planners (technicians, shift supervisors, strategic buyers) - 2 quality managers (measuring room) - 14 Turning-milling machine operator We still have free capacities as a contract manufacturer in the turning shop as well as in milling, our team is looking forward to your inquiries. If you would like to learn more about us, please have a look at our Website: www.fiber-tech.de Or to our company video https://www.youtube.com/watch?v=3UX-DUgBwSo Many greetings from Chemnitz Karsten Hütter Operations Manager FIBER-TECH Management GmbH mobile: 0049 176/18427612 phone 0049 371/84276-60 fax 0049 371/80829939 mail karsten.huetter@fiber-tech.de www.fiber-tech.de

Drault Décolletage, founded in 2002 is a team of qualified and certified professionals. They are recognized for their flexibility and ability to react to the market needs, both nationally and internationally. They provide excellent service and are competitive. Drault Décolletage manufactures parts from plan from 0.3 mm to 40 mm. They are able to produce parts in quantities from 10 000 to several million pieces in all types of metal : stainless steel, steel, brass, nickel, etc... Drault Décolletage also provides a variety finishing treatments.

About Q TECH s.r.o.: The company Q TECH s.r.o. was founded in year 2000 as a small business company providing trade mediation in mechanical engineering. At present, we are focused on custom production of steel structures and machinery using welding, including machining, surface treatment by painting and assembly. Our team consists of approximately 90 experienced and qualified people. Our production space approx. 4500 m2 and load capacity of cranes enable the production of parts up to a weight of 16 tons and a length of 25 m. We are focused on the foreign trade, most of our production heads to Western Europe. We are holders of significant certificates for the field of welding. - We are focused on production and assembly of steel constructions - Production and assembly of machined parts - Surface treatment - NDT services - Our company employs about 90 people - We´re mostly oriented abroad to countries like Germany, Norway, Netherland, France and others

Using the most up-to-date equipment, we manufacture smaller and larger production runs, turned parts, shafts and special screws for the most varied clientele at home and abroad. We provide customer-specific laser marking, vibratory grinding and individual packaging with brand logos. And when it comes to more specialised jobs, we can depend on local, long-standing, reliable partners. We produce the required parts according to your specifications, using all current materials, in diameters ranging from 4 to 65 mm and with a maximum length of up to 600 mm. We process predominantly machining steels, as well as various types of stainless steel and aluminium. Depending on the size and complexity of the production run, we produce workpieces on CNC multi-spindle and turning centres and long-part lathes. For the further machining of blanks and more complex workpieces, Rumpel utilises highperformance automatic thread rolling and rotary indexing machines, universal lathes, high-precision milling and turning centres, as well as centreless grinding machines. On request, we are able to produce individual parts and mount further components onto assemblies. The different kinds of turned screws we produce can be manufactured with standard metric or American / English threads, with fine-pitch threads or various thread pitches. Torx® and Torx Plus® Rumpel holds a licence to manufacture both of these copyright-protected drive systems. These drives are capable of delivering high levels of torque without damaging the screw head. They reduce assembly times, increase productivity and improve performance on assembly lines. Metal & plastic parts What we previously processed in metal in a more traditional production process, you can now obtain from us in plastic – why not test our efficiency in this material?

The company Willy Müller GmbH Co. can look back on almost 75 years of successful activity in mechanical and apparatus engineering, starting with a small workshop for wrought iron and welded constructions up to special constructions in the interaction of the production areas mechanical processing and sheet metal processing, e.g. combination torches, flaps , E-filter parts. Our focus: - Load suspension devices: Here the production from the standard crossbeam to the special lifting device for the Machine transport - Furnace construction: oil, gas and coal dust burners (also combined) and their components such as Standby lances, nozzles, swirl chambers (also in armored versions) etc. - Rail vehicles: supply parts for trams, subways and IC trains such as B. door bearings, door locks, striking plates, bolts of all kinds (also hardened and nickel-plated), fastening elements, housing covers, brackets, handlebars, tie rods and the like.vam (total volume approx. 1,000 different parts) - Expansion joints: metal expansion joints (preferably rectangular) of approx. 300 x 300 mm left. W. to compensators for DENOX systems with edge lengths greater than 20,000 mm in steel and stainless steel (also heat-resistant), max. Unit weight so far: approx. 33 t Companies like Mitsubishi Hitachi, Bilfinger, Siemens, EON, RWE trust as long-term customers the quality of our work. What started as a one-man operation in 1945 has developed into a company with 30 employees within two generations. We produce with a modern machine park and have a wide range of offers and so we can say with a little pride: "A strong team works miracles" and MADE IN GERMANY

Our Story: The company was founded in 1994 by Heinz-Josef Schlemmer as a sole proprietorship on part-time basis. The basis was the further handling of turned parts in wages for the turned parts industry. After a short time the first cam-type machines were put into operation, it was followed by the acquisition of a property with about 150 m2 of commercial space. In the year 2000/2002 and 2004 made further purchases of CNC lathes, whereby the premises were again too tight. In the year 2005 is Mr. Schlemmer the opportunity to acquire the company Johann Schnekenburger GmbH, where he was employed full since 1983. The company JDS, which was founded in 1950 by Johann Schnekenburger and until 2005 was in the second generation of family ownership, was for more than 50 years in the field of fastening technology on the market. It screws of all types were produced. The companySchlemmer of turned parts had been operating successfully for over 10 years in the field. With the acquisition of the company by Johann Schnekenburger Schlemmer that production range was extended many times and it was founded in the gourmet Metalworking & Fasteners GmbH & Co KG. We invest in the future: This is the foundation and our philosophy. We will invest in the coming months and years in the latest machinery and equipment. The expansion of warehouse and production areas are planned. Our range of services: Our machinery includes several modern CNC lathes with up to 5 axes, rotary transfer machines, bend machines, thread rolling machines, such as various finishing machines. The product range comprises rotary parts of all types and materials, threaded rods and screws with hexagon socket as Hexagon. The production of fasteners for the dowels and construction industries as well as an integral part of the furniture and electrical industry. As will be made all the operations which in-house usually we are able to respond at short notice. Heat treatment and electroplating finishes, such as hot-dip galvanizing are made by reliable partner at short notice outside the home. Our market: We deliver the Swabian quality work in over 40 countries around the world. However, the focus is on Germany and Europe. Our Quality: State of the art measuring equipment and SPC-controlled programs ensure quality. Our products are subject to constant review of the ISO 9002 is similar. This was taken over by the company Johann Schnekenburger that was zertiviziert to 2003, according to ISO 9002. Re Zertivizierung is sought.

Astor Otomat has been serving in the Hydraulic Systems, CNC Lathe, Machining, Mass Production, Automotive Spare Parts, Tractor and Construction Machinery Spare Parts sectors since 1986. Our company, which has more than 40 years of experience, has successfully completed hundreds of projects in all industrial sectors, especially in the industry, with its expert staff and has become a leading company in its sector. As Astor Otomat, we closely follow the developments in production technology all over the world and constantly work to offer the most advanced technologies to our manufacturers. Traceability is ensured before, during and after production, and the necessary quality assurance conditions are met according to customer requests. We offer products and projects that comply with international standards, technical conditions and customer demands based on customer satisfaction.

Our company is a 68-year-old company and with its expert team and qualified product selection, we offer our customers and the companies that choose us the opportunity to work together by prioritizing quality. Our company video https://youtu.be/iOXV0C5f_v8?si=kLx2VGLXe1QAvMev

From 1970 we produce, under specification and drawing, polished particulars for every industrial sector. We can work with a wide kind of metals, i.e.: Inox solid steel Tied up steels Titanium Alluminium Copper alloy Brass alloy The direct link with our customers keep we able to understand the problems and to seek for the best solution according to the production of every piece. Our precision is near our passion.

Welcome to Luka Kunststofftechnik GmbH Deep drawing is a fine art of plastics processing that requires experience and precision — and that is exactly what we bring to the table. For over 30 years, we have been your reliable partner in the field of deep drawing technology and CNC processing. Our high-quality thermoformed parts can be used in a variety of ways. Our products impress with their precision, durability and quality. We offer expert advice on material applications for all thermoplastics, including fire protection, anti-graffiti coating, UV protection and other special requirements. Luka Kunststofftechnik GmbH — your expert for innovative plastic solutions.

Azienda Mundialmec srl is located in the ASI Industrial Area of Marcianise (Caserta), near the Caserta Sud motorway exit, the Alta railway station speed of Naples Afragola, and Naples Capodichino airport. The position is an advantage for contacts and logistics for both customers and suppliers. Founded in 2003, Mundialmec specializes in: Production of milling and lathe components, design and construction of special machines and tools, stamping and drawing dies for sheet metal, works Description of small and medium series parts and components, assembly on behalf third parties, maintenance and restoration of machines also at the customer's premises. The offer to customers is integrated: Design, Planning and Consulting, Industrialization One, Implementation, Testing, also in synergy with the local network of complementary SMEs Tari. As a result of this diversified professional offer, the customer base is today represented by companies operating in the automotive, aeronautics, household appliances, medical, special designs: Whirlpool spa, Desmon spa, ATM srl, Magnaghi aerpazio spa, Mada spa, BST spa, Innovative Mechanics srl, TND srl, Elva srl, Protom srl, Tridema srl, TND srl, University of Naples etc etc The Company has its own covered and uncovered spaces for a total of 1200 square meters, and the Park Machines, milling machines and lathes of the latest 4.0 generation, dates back no more than three years. The three members have more than thirty years of experience, always gained in the Company of sector, and with their consolidated knowledge they constitute a basic value of A company. Given the size of the Company and the direct presence of the Shareholders in the business, the points of Strength I am: SPEED and FLEXIBILITY OF PRODUCTION PRICE COMPETITIVENESS COMPETENCE

see our Web site at: www.lauble-drehteile.de

We are a family business with 90 employees. The core competencies are the production of precision mechanical components as well as complete assemblies. In addition, the manufacture of Macor glass ceramic components. We have around 35 employees in production and around 30 assembly technicians. We manufacture from single parts to large series. Simple component as well as highly complex. The cleaning of the components is standard and we have a measuring laboratory with standard VDI class 1 (+/- 0.4 ° C over 24h).

Gernot Czerwinksi GmbH is at home in the field of metal processing (especially in the area of aluminum milling). We process parts ranging from the smallest parts up to a maximum size of 2000x3000mm. Turned parts in the area of individual parts and small series are also part of our portfolio. Gernot Czerwinski GmbH is characterized by excellent quality and fast delivery capacity. We procure the material, process and, on request, your parts can also be surface treated. We are looking forward to your request.