If >>> not - there's not Following this motto we combine for more than 15 years of production engineering for the complete machining sophisticated machine components productivity and flexibility with the help of horizontal machining center to a economic optimum. Our services include turning, drilling and milling of large, complex hydraulic components, Machine parts for large vehicles and special purpose machines. Our strength lies in the consistent use of the latest manufacturing technologies. Even turning operations of cubic parts whose processing have usually been very labor intensive to conventional lathes was, can with us on one of the BAZ through the use of combined Rotary milling are carried out completely in one setting. The hereby achieved increased process safety and significantly reduced tooling and clamping times are Benefits that we like to pass on to our customers. The connection of the BAZ to a FMS pallet rack system with 60 pallets and a total of 940 tools allows us sufficient machine pallets to store retrievable using appropriate clamping technology. Thus we are able at any time to react flexibly to customer demand absolute, even in small quantities. The slim structure of a small enterprise, 25 committed and qualified employees, a manufacturing engineering Organization at the highest level and of course quality "Made by MUZ" are the benefits that our Know how to use in long-term partnership clients. Interested? We see your inquiry on gladly!

Eggerstorfer develops and manufactures test benches for numerous highly complex tasks in industry and research, including brake technology, compressors and pumps. With experience and innovative ideas, we support you right from the conception phase and work out performance data and specifications together with you. With our proven engineering process chain, we optimize the organizational workflow, make optimal use of all resources and provide our customers with transparent and comprehensible insights into the project status. Even after installation, we will continue to accompany you with training, service and maintenance and adapt your test bench to new requirements. MOUNTING CONSTRUCTION & SPECIAL PROJECTS Assembly and automation technology does not exist "off-the-shelf". Eggerstorfer's engineering process chain standardizes internal and external processes, thus optimizing the costs and time involved in purchasing special machines and special assembly equipment. Together with you, we analyse the requirements and then implement turnkey solutions based on our broad experience in the automotive, aerospace, military and manufacturing industries. MODEL CONSTRUCTION With our competence in engineering and our modern production technology we supply prototypes, small series and complete assemblies according to sketches, drawings or 3D models. Eggerstorfer successfully implements these projects despite tight budgets, tight deadlines and complex technical requirements. Our CNC machining centres, proven precision measuring technology and the know-how in demanding machining tasks guarantee the success of your project.

The Trindo digital manufactory specializes in additive manufacturing with plastics. Technologies such as the SLS process and the MJF process make many milling components more cost-effective. We take over the analysis of your milling components up to the implementation in 3D printing.

• Hubi Metal Industry is a family business and we have been working together since 2011. • The company was founded in 2022, but in the previous periods we gained several years of experience in many areas, including custom manufacturing and target machine design. • We also pride ourselves on our extensive knowledge of the automotive industry. • We also understand the fields of electronics, railways, tobacco industry, food industry and metal industry

EXPERTISE IN THE TRADE AND MANUFACTURE OF STEEL PIPES AND PISTON RODS Schierle Stahlrohre GmbH & Co. KG is the largest stockholder for cylinder tubes and piston rods in Europe. Our strength is service in trade and manufacturing.

Our company was founded in 1949 by Otto Rimmelspacher in Karlsruhe. We are a universal oriented Lohndreherei and Lohnfräserei. In addition, we are able parts made of steel, stainless steel (V2 and V4) or special materials to weld such as Hastelloy and titanium. Dimensions: Ø20 - Ø300 mm, length up to 3 m, weight up to 200 kg, TIG manual welding, welds with a programmable TIG circumferential seam welding machine. From customers demanded extra-tests of the welds are performed externally. (TÜV, DEKRA, x-ray exams, FE exams, etc.). Furthermore, we can turn, mill and weld plastics. (Heating element sleeve welding or hot air welding). Our metal welders are TÜV - tested according to "EN 287-1141 T". We also process steps according to "DIN EN ISO 15614-1" and "QW-483", and admission AD2000 Module A1 according to Pressure Equipment Directive 97/23/EC. We are also Materialumstemplungsberechtigt for "10204 EN 3.2" At a certification according to "DIN EN ISO 9001:2008" we are currently working, we will complete this certification in the first quarter of 2011. Furthermore, we manufacture eductor and air Reisser according to customer specifications. Eductor are used for pumping water in wells, in low-lying water table. Air Reiser care in domestic water systems for a Constant air cushion in the air pressure tank. These products are designed and manufactured specifically to customer requirements, such as flow rate and head. For more information, please refer to the brochures in our download area. Our 15 employees are almost exclusively skilled metal workers who work independently and know that it comes down to it. On lathes we have conventional center lathes up to a peak height of 250 mm, as well as various CNC lathes Company INDEX to a turning diameter of 300 mm and a tip length of 1500 mm, with and without tailstock, with and without bezel. Our largest center lathe can handle rough-and-work on waves up to a length of 2500 mm and a peak height of 350 mm. Focus of our production is the production of single parts and small to medium series for industrial customers, such as nozzles and diffusers. We also manufacture complete pressure vessel according to customer specification, including flanges according to DIN and ASA. One of our NC lathes can also be operated with hydraulic shuttle chucks for housing to NW 25 or NW 32, the processing can thus be made on 4 sides in one clamping. In NC milling we have a CHIRON machining center with 36 tools and four programmable axes, the fourth axis is set up as a rotary axis. Maximum process paths X = 1600mm, Y = 400mm, Z = 415 mm. In addition, we still have a smaller machining center with 8 tools for drilling and thread to M 12 in steel. Quantity Spectrum 1 to 1,000. A CNC lathe is equipped with an automatically operating portal charging system for chuck parts up to max. Diameter of 120 mm and a maximum weight of 5 kg set.Here we can also realize larger batch sizes. For painting, we have a small spray booth. Can we have a customer, such as galvanized surface coating, not solve yourself, we cooperate with reliable partners.

CDF specializes in turning and milling parts of ferrous and non-ferrous metals and plastics, especially piecework and small batch work. We guarantee quality and short delivery times. We work with reliable suppliers. So you can also contact us for 5-axis milling, grinding, and lapping honen-, curing, wire EDM ...

High precision, complex turning, milling and grinding parts - from 4 mm to 1,800 mm in diameter and up to a length of 2000 mm and finished assemblies, ball screws and motor spindles for the automotive, mechanical engineering, power tools, aerospace, heating and Building Construction. Manufacturing capabilities work Wertach: Turning and Dreh-/Fräsbearbeitung to Ø400mm, length up to 1000mm Milling and Fräs-/Drehbearbeitung cubic and rotationally symmetrical parts to ø1800mm, length up to 1000mm. Feinstbearbeitungstechniken * External grinding part length max 3000mm, 1000mm ø max * Internal grinding part length max 1400mm, 1000mm ø max * Spline grinding ø max 300mm, length up to 800mm * Spline grinding groove width 4mm to 40mm groove width 220mm Ømax * Surface grinding 800x400x500mm * Honing ø4 to Ø72mm Heat treatment: quenching and tempering, case hardening, carbonitriding, vacuum hardening, annealing, Kurzzeitgasnitrieren, carburizing, induction hardening and freezing Deep-hole drilling Clear Deburring Production spectrum ballscrews Diameter 12-125mm Thread length up to 3000mm Gradient of 2.5 mm to 50 mm a and mehrgänging Investment type: 2-or 4-point system Accuracy classes 1-3-5-7-10 ISO 3408 Feritungsverfahren whirled / ground Special threads on request The stiffness

Industry suppliers for the machinery and plant engineering. Manufacturing designs from sheet metal and tube. Material processing of steel, stainless steel and aluminum.

Recomec SRL presents itself as a commercial company with over 20 years of experience in the ferrous and non-ferrous materials processing industry. Quality and seriousness have recommended us all these years, being proud of our partnerships.

The founding of W-W Metallbau: Quality and passion The story of W-W Metallbau begins in 2025, when we founded the company with a clear vision and unwavering passion. Since then, we have stood for precision, reliability and innovative solutions in metal construction. Our values are based on an uncompromising quest for quality and customer satisfaction, accompanied by personal care that focuses on every customer and every project. With a growing team and a solid foundation of trust and expertise, we develop sustainable and tailor-made solutions that are convincing. Discover how we can turn your ideas into reality together and let us be part of your vision.

The company specializes in the production of various metal machine parts for various machines, whether it is for initial installation or spare parts. We combine various jobs with specialized workshops for individual phases of work. In one place you can arrange the delivery of a wide range of machine parts, regardless of their complexity and variety of technologies. Twenty years of experience in the production of mechanical parts and assemblies for sophisticated machines and devices.

As CEO of Technikol, I am proud to share with you our established metal manufacturing network in Bulgaria, along with a team of engineers and designers to offer their support along the way. From small parts to complex metal assemblies, what we can offer is a combination of the following: 1. Free quotation within 1 to 2 working days. 2. Unlimited capacity for (medium → large) quantity orders. 3. Laser cutting (Sheet-metal and Tubing) 4. CNC milling, turning & pipe bending 5. Robotic & Manual welding 6. DFM and Welded Assemblies 7. KTL coating 8. Zinc, Phosphate and Powder coating 9. Custom packaging & labelling 10. Cost-effective transportation solutions Are you noticing the gradual increase in inflation beginning to affect your profit margins? Could you delegate a part of your jobs in order to focus your energy on the more important ones? Are you exploring ways to maintain the same end-prices for your clients? Technikol can help you save up to 50% on certain jobs, and this is possible due to the low costs related to the manufacturing process here in Bulgaria. To give you an idea, we present some examples below: - Electricity = €0.11/kWh - Fuel = €1.30/L - Worker Salaries = €900 - €1 200/month - Income Tax = 10 % - Steel = €0.80 – €1.10/kg - Aluminum = €4.50 – €5.20/kg [Notice: These prices are representative for the first half of 2024 / Material supply comes from Serbia & Ukraine]

We are a medium-sized family business, which has specialized as a system supplier for complex turned parts in the diameter range up to 40.00mm. In doing so, we meet all the challenges and demands of the current world of materials. The location, located between Stuttgart and Karlsruhe, is characterized by its excellent regional proximity to major car manufacturers and suppliers. Because customer proximity and communication are in the foreground with us.

The company Brero Engineering Srl was established to meet the needs of worldwide customers in the Tochterfimen Brembomatic Srl and Brembotecnica Srl. Thanks to the support of an experienced engineering team, we are able to handle many machining processes as the prime contractor. In addition, thanks to the mutual trust and the solid partnership succeeds Brero competitive to be (in terms of quality, service and price). The company can deliver in every area of complex technologies with the support and cooperation of competent companies.

USE THE RECOGNIZED HIGH QUALITY OF OUR PRODUCTS The name HEIWA Architectural Hardware has stood for over 30 years for reliability, quality and service. Develop even after more than three decades and we are technically advanced, hands-on fasteners and stampings and welded assemblies forth. All products are manufactured in accordance with the highest demands on quality of material and manufacturing quality exclusively in Germany. In close cooperation with our customers we are also complex desires and wishes in the form of individual custom. It starts with the expert advice and the exploration of the possibilities. After a short time we provide you with the pattern and then make your products from a variety of materials here. Our qualified and experienced staff can assist you: - In the assembly of modules - For welding jobs - For Punching - With mechanical operations and always in constant high quality. The in-house tool shop gives us great flexibility and rapid availability in the manufacturing, service and maintenance.

DDZ srl specialises in mechanical processing under contract, especially in milling, turning and deep drilling. Over the years, DDZ srl has focused on the production of parts for packaging machines, such as rotatory and intermittent sealing masses, welding wheels, supports, frames. In order to meet our customers' requirements, we have increased our offer in terms of machinery, so to produce a wide range of parts for the packaging sector as well as many other mechanical sectors. The company uses a CAD/CAM 2D-3D system for programming.