About us Our quality standards are the highest priority of our business for us. Only then can we identify with each product and service. That's why we have this website set up for you so that we can inform you better about our services. The Company The Heuer was founded on 01.10.1994 to customize with the target individual parts, small series and devices. After a short gift market, the company quickly became a customer-oriented extended by the purchase of more CNC machine tools. The end of 1997 our then existing premises were too small. Already in December 1998, a company expansion into a newly constructed production and assembly hall could be made. In 1998 the company was converted into change HEUER CNC MANUFACTURING GMBH The workforce could would be extended from initially 1 to the current 18 employees.

designing, manufacturing of tools and mashines for cutting, punshing and extrusion. CNC-manufacturing 3D-Milling until 5-axis. complete special mashines.

We are a young company with highly trained employees that you would like to make available its experience and skill. Our responsibility to our customers guarantees best quality! The strengths of the company Optimetall are in sheet metal processing and manufacturing components. A particular challenge we have set ourselves, and of the benefits you as our customer is 100%, our short delivery times, compliance with which we are committed. Production possibilities: • Laser cutting Max 4000x2000mm St1203; St37-2 to 20mm • Pipe Laser Cutting Max pipe diameter 150mm • Automatic Bandsaw max. 6m Form of pipes, flat steel, round stock, pipes also bevel cuts possible! • Press Brakes max.4m, overleaf box height 110mm • Drilling and NC punching • Welding, points • Sand blasting, painting • Powder coating • Assembly work • organization of: Galvanizing, chrome plating ....

For more than four decades, the name Kerling stands for the development and production of high quality technical plastic parts. We offer the idea to the final product through organized, customer-friendly manufacturing solutions from a single source. We specialize in the production of housing for the power electronics from renowned thyristors and IGBT Manufacturer. Basis for the production of sophisticated plastic parts is the use of innovative injection molding technology and production processes. We produce on a production area of 4500 sqm with modern, fully automated injection molding machines of size 25 to.-650 tons. Our corporate goals, including without limitation zero-defect production which we will support the certification in Duch 9001:2000, 14001 and EMAS. In addition, we also received awards from our customers via a PPM value of 0, which we are very proud and consider this as a credit to our staff. We also have been successful for years as a training company for technical and commercial professions operate.

The company Homatec Industrietechnik GmbH was founded in 2000. Corporate purpose, since the beginning of the production of welded components for general mechanical engineering, machining of materials of almost all grades, as well as the production of sheet metal parts for a variety of applications and application areas. Managing Director is the mechanical engineer Gottfried Zeißler. Our highest corporate objective in the past and in the future will be the customer orientation and thus customer satisfaction. This is to achieve the central task of the operating activity. Direction of the company, the customer qualifies with respect to the tasks with a wide range of services and solution-oriented way. The production of quality in all business areas is a top priority, not least the ongoing optimization of all internal processes, with the objective of maximum productivity and an increase in transparency in the organizational structures and processes of the company to the advantage of our customers. Our production facilities are continuously kept in perfect condition, in the modernization of our machinery, we are constantly investing.

The MAB is a medium-sized company on the northern border of Saxony and Brandenburg. Our main area of work are the areas of engineering and steel construction. We do not limit ourselves only to the design, but also offer the complete service from development, project planning and design, to manufacturing and installation. We specialize in areas such as foundry, tank, jet and environmental engineering.

CNC Schauberger is your competent partner in the areas of wage and Auftragsfertigung.Wir offer Excelent quality, non-bureaucratic support and first-class service and look forward to also pleased to count you among our satisfied customers in the future. Since 1999, we serve the business park location 1 4652 Fischlham a large number of renowned customers in the industrial construction and technology industry. Tailor-made solutions, expert advice and the common project management with our customers, are among the cornerstones of our corporate philosophy.

Our production is divided into the areas of tool making, plastic molding, stamping and assembly. Toolmaking In the field of tool we provide plastic injection tools forth for various requirements, such as slide tools, baking tools, tools with core pulls or collapsible cores, hot runner molds, and of course aluminum tools. Stamping Technology In the field of stamping technology, we manufacture cutting and bending tools such as inserts for plastic injection moldings, contact springs for connecting elements of the electrical or plastic films as flexible connections. In addition, we manufacture the needed in the assembly jigs and assembly aids. CNC and EDM sinking Our performance in computer-integrated manufacturing puts us also in a position to offer CNC milling and die-sinking EDM in wage labor. Plastic molding The color matching and series production, we can perform in our own plastic injection molding reliable because we can draw on many years of accumulated experience in these sectors. Assembly Our wide range of products is installed in the assembly to complete assemblies such as plug, consisting of shielded housing half-shells with soldered board and strain relief for cable to beating.

Production of reinforcement bars for the concrete industry, exhibition stand, turned parts, bended parts, welded parts

The Kurt Eckstein GmbH manufactures since 1973 blanks in general structural steel. First was produced with conventional cutting machines. Due to the requirements of the cut part, we quickly realized That has to be invested in CNC machines. Claims to material - cuts that are caused by thermal processes, or not to cut, we have, in 1994, the water jet cutting technology integrated into the production line. Today autogenous flame cut, water-jet cuts and laser cutting are manufactured on modern equipment. For over 30 years satisfied customers. Quality, reliability and on-time delivery are our principles. Thus, we have earned the trust of our customers, who come from diverse areas of industry, crafts and trade. Technological advantages waterjet cutting • no mechanical and thermal damage to the cut surface • good use of material • cutting any contours • Minimal pressure on the workpiece • Unlimited variety of materials • Painted and coated parts can be easily edited Large water-jet cuts Appendix 1 - T11 2060 - Work area 2000 x 6000 mm - Water jet cutting with two heads Water jet cutting with cutting bevels - compensation Appendix 2 - WMC2 4030 - Dynamic - Work area 4000 x 3000 mm - Water jet cutting

The AZ Factory is your source for waterjet cutting, CNC turning, CNC milling, manufacturing of welded assemblies and assembly. We supply from prototypes to series from a single source and provide maximum availability and flexibility with high precision and punctuality!

Lazer Metal was founded in 1996 and started to service in Laser Cutting service. Since our company is related to a sector which is rapidly improving parallel to technological developments, self-improvement in quality, serving policy and regeneration is inevitable for Lazer Metal. For this purpose, Laser Marking, CNC abkant folding, surface polishing and Visual Quality Control system machines have been added to our machine pool uptoday. At the moment, our service is supported by the ISO 9001 - 2000 certificates. Thus, our Laser cutting and laser marking processes are done with the high quality and customer satisfaction principle. Our company, showing its respect to customers with the sensitivity and seriousness in production process, will be working hard to offer you -the precious customers- World's best and newest technologies. We believe that Turkish Industry deserves much more and better...

WÜRZ is a worldwide operating medium sized supplier of very different industries. We produce and sell high precision parts and components made of all cuttable materials. Therefore we trust in latest manufacturing systems. In cooperation with our subsidiary company KÄMPFER WÜRZ Umformtechnik we use our considerable resources. We have a wide spectrum of manufacturing possibilities at our disposal, which distinguishes us– apart from the high standard of our products – on the world market. Likewise fascinating is our range of products: from complex units as individual items up to precision parts and components in large series. At automotive and utility vehicle industry, at mechanical engineering, at fluid and aviation technology fully operational WÜRZ products secure safety, function and efficiency. The potential of your company finds its affirmation in long term business relations with leading industrial enterprises. Further information about WÜRZ Fertigungstechnik can be obtained by using the left navigation bar. Latest manufacturing technology WÜRZ focuses consequently on state-of-the-art manufacturing technology. We invest permanently. On one hand in the modernization of our fleet of machinery, on the other hand to expand our possibilities and to be able to offer new options to our customers. Eleven-axes-CNC-turning, eleven-axes-CNC-profile-grinding, CNC-round-, thread-, excenter- and polygonal grinding in one process, as well as double-spindle CNC-milling with swivel table and plate changer are cornerstones of our spectrum. Further information about our manufacturing technologies can be obtained by using the left navigation bar.

Sheet metal processing Laser Cutting Frame building Metal CNC milling

Certified to DIN EN 1090-2 Medium-sized metal construction company Production of welded constructions in steel / stainless steel / aluminum One-off production / large quantities or series production Our machinery - Plasma flame cutting machine for sheets up to 30 mm thick and 25 mm stainless steel - Curb up to 200 t and 3m material length - Roller for sheets up to 12 mm thickness very good quality short delivery time

MEDA GROUP has been providing services to Turkish and global industries in the steel structure, machinery and equipment production field for more than 25 years.  Specialized in the production of components for crushing and screening plants, tunnel boring machinery (TBM), concrete plants, and heavy-duty and construction machinery, MEDA GROUP offers technical solutions to many firms that play a leading role in the design, production and assembly of steel structures, machinery and equipment projects.  With its production plant in Ankara, which has a floor area of 3,600 square meters, and having successfully completed local and international projects as a solution partner with its 50-strong specialized staff, MEDA GROUP is one of the few companies that have managed to combine an innovative and competitive strategy with sustainable quality.

Altay Steels Limited specializes as a wear and heat-resistant OEM spare part manufacturer. Our current production includes crushing rings, pressure rings, wearing plates for the cement industry, and grate bars for the energy sector. We take pride in being an OEM spare parts supplier to industry giants such as Claudius Peters Projects, Babcock Wilcox Volund A/S, Stadler Stahlguss A/S. Allow me to provide some insights into our label and facility: Our facility spans around 2,500 m² and has the capacity to reach more than 100 tons of casting per month. Our production team is highly experienced in the sector. Furthermore, it's worth noting that we possess comprehensive knowledge in manufacturing armor plates, clinker lining and cooling plates, hammers, and chain links using various materials. If you have any inquiries or if there's additional information you require, please feel free to reach out. We look forward to the opportunity of potential collaboration.

Since it was founded in 1993, Agro Line has established significant domestic and international relationships in the production of carbon steel. We are supplying in our 20,000m2 production field, with 230 employees more than ten internationally renowned Western European strategic partners like: Ammann, Behringer, elumatec, Willibald, Goldhofer. We are able to provide the complete process of production according to the customer’s requirements and documentation especially machined parts up to six metres in size.

We are a company that deals with modernization, design and installation works, as well as performs relocation works. More than sixteen years we are engaged in the production of metal structures, installation of industrial equipment, modernization and relocation of production facilities in Ukraine and Europe. Our company manufactures any metal products to order according to individual drawings.