As a regional company, we, HEK Präzisionstechnik GmbH, offer small, medium and large series components in the following technical areas: • Milling: components up to 990 mm long, 700 mm wide and up to 350 mm high • Turning: Machining components up to Ø450 mm and 500 mm in length • Small module assembly • Any surface treatment, such as components with polishing • Measurement reports included (Keyence IM 8030T) What makes us a potential supplier is our delivery reliability, the quality of our products, many years of experience and, above all, the requirement for ourselves to achieve the highest possible level of customer satisfaction. On request, we have the option of storing long-range products in our company to ensure timely deliveries. Flexibility is very important to us. We would be delighted to work with you and to count you as one of our satisfied customers in the future. Have we sparked your interest? Then feel free to get in touch with us.

The company Willy Müller GmbH Co. can look back on almost 75 years of successful activity in mechanical and apparatus engineering, starting with a small workshop for wrought iron and welded constructions up to special constructions in the interaction of the production areas mechanical processing and sheet metal processing, e.g. combination torches, flaps , E-filter parts. Our focus: - Load suspension devices: Here the production from the standard crossbeam to the special lifting device for the Machine transport - Furnace construction: oil, gas and coal dust burners (also combined) and their components such as Standby lances, nozzles, swirl chambers (also in armored versions) etc. - Rail vehicles: supply parts for trams, subways and IC trains such as B. door bearings, door locks, striking plates, bolts of all kinds (also hardened and nickel-plated), fastening elements, housing covers, brackets, handlebars, tie rods and the like.vam (total volume approx. 1,000 different parts) - Expansion joints: metal expansion joints (preferably rectangular) of approx. 300 x 300 mm left. W. to compensators for DENOX systems with edge lengths greater than 20,000 mm in steel and stainless steel (also heat-resistant), max. Unit weight so far: approx. 33 t Companies like Mitsubishi Hitachi, Bilfinger, Siemens, EON, RWE trust as long-term customers the quality of our work. What started as a one-man operation in 1945 has developed into a company with 30 employees within two generations. We produce with a modern machine park and have a wide range of offers and so we can say with a little pride: "A strong team works miracles" and MADE IN GERMANY

Mey Maschinenbau Prien has been designing, producing and optimizing precision mechanical OEM products for a wide range of industries for more than 50 years. Our team of more than 200 employees will implement your ideas at our three facilities. Our headquarters are in Prien am Chiemsee, while our other production facilities are in Nyúl and Győr in Hungary. This allows us to achieve an optimum cost mix, optimize the manufacturing of your product and pass the potential savings straight on to you. We always strive to act personally, conscientiously and flexibly, whether we are working with our clients or amongst our colleagues. These values guide our way of working and the resulting quality is reflected in your products.

PONAS, s.r.o. was founded in 2003 in Považská Bystrica as a construction and trading company in the field of mechanical engineering. Gradualy, it started with the implementation of produktion in the field of clamping fixtures and precision parts for single - piece and small- series produktion. 2003 Company founded 2012 Start of produktion activities 2014 Acquisition of the Swiss - Slovak company KONVEX Technology, s.r.o. 2021 Purchase of a produktion hall 2022 Acquisition of the Slovak company PS Kovovýroba, s.r.o.

In 1877 the company was founded Uebele. Since then the company has grown steadily and today offers the complete program around the punching technique. We manufacture high sophisticated tools, high-precision fine blanked parts, stamping parts, bending parts, stamping and deep drawn parts and metal pressing parts. The assembly production and the production of small and large series are part of our extensive range of services. For our national and international customers, we manufacture complex parts on the following presses: - Deep drawing presses 400-4000 kN (table size up to: 2,000 x 1,300) - Automatic punching 400-6300 kN (table size up to: 3,000 x 1,500), - Fine blanking presses from 1,600 kN to 3,200 kN, - Pressing machine to Dm 900 x 5 mm - Press brakes up to 1,500 mm long Materials / Materials: Steel, stainless steel (1.4301 / 1.4571 / 4310, etc.) and non-ferrous metals such as aluminum, copper, bronze and brass, and substance capable plastics. Sheet thickness: 0.05 mm - 10.0 mm Coil: 300 mm x 10 mm and 1000 mm x 8 mm Product Line / products: Fastening systems for photovoltaic systems such as roof hooks, shielding, Cell connectors, mugs, fittings, spacers, flanges, housings, holders, sleeves, Contacts, discs, covers, clamps, braces, disc springs, angles and gears Toolmaking The following services offered by our professional expert toolmaking: - Project development to series production - Tool design - Prototype production - Construction of composite tools, drawing tools, stamping tools, bending tools, Fine-cut and cutting tools as well as devices Subsequent processing - Vibratory grinding, brush deburring, drums, tape loops with automatic feed - Heat treatment - all standard methods (inter-stage hardening, Nitriding, Hardening, and Nitrocarburizinga) Surface Finishing / Surface coating - Powder coating, KTL, painting - Electroplated coatings of Au to Zn / Ni (chrome plating, galvanizing, burnishing) Assembly production As a system supplier, we offer our customers from different industries all from a single source - from product development to the mounted assembly. - Inert gas welding (TIG / MIG / MAG) - Robot welding - Stud Welding - Spot and projection welding - Pressure joining (Clinching / clinching) - Riveting, caulking, gluing

CASTING and FORGING PARTS BY CUSTOMER Together with our partner companies ISG industry service and Geiger Berger Industries, we offer you the opportunity to access from a wide range of different foundries, forging and machining company from Germany, Spain, Hungary and China. We take care of you this vendor selection, request, technical clarification, quality assurance, packaging, shipping and timely delivery of your products according to your drawings and specifications. Through our three locations in Germany, we are always in their vicinity: CFT Hanseatic Guss GmbH, 28195 Bremen ISG industry service Geiger e.Kfm., 73491 Neuler Berger Industries K., 50668 Cologne You have a question or want to get to know us? Please contact one of the below mentioned contact, we'll take care of everything else.

We are your reliable partner in the field of machining technology! Thanks to many years of experience and modern machinery, we produce high-quality machine components primarily from aluminum, stainless steel and copper. Our range of services includes precise turned and milled parts as well as deep-hole drilled machine components. Thanks to a qualified team, we are able to manufacture complex components according to individual customer requirements. From individual parts to small series production, we offer tailor-made solutions. Contact us — we will be happy to advise you personally!

Welcome to MV Blechbearbeitung ! In the north of germany we are Your reliable partner for laser cutting ( sheets an tubes ), punching and bending, Milling and Welding up to ready-to-use constructions. The welding workshop with its high levelled qualifications will meet Your requirements - certified acc. ISO 1090 EXC 3 for steel, stainless steel as well as aluminium. MAG, WIG manual welding, laser welding upto 5 mm, robotic welding up to 500 kg piece weight at highest quality level.

Saku Metall Allhanke Tehas AS provides subcontracting services, specializing in the manufacturing of sheet metal assemblies with integrated technologies based on customers' drawings and requirements. With all key production processes handled in-house, we help manufacturers enhance supply chain efficiency by reducing delivery times and minimizing quality risks. Our in-house production processes include development, cutting, bending, welding, painting, and assembly, ensuring a seamless and reliable manufacturing experience tailored to your needs.

We bring metal into shape! Your specialist for metalworking & production of complete assemblies About us: We face many different challenges every day. Our range of services ranges from classic sheet metal processing to the production of complex components and assemblies as well as the production of individual components. Custom-made products and individual solutions round off our capabilities. Whether you are a craftsman or a bulk buyer – thanks to our versatility, we are able to meet everything according to customer requirements.

Welcome to the CNC Feinwerktechnik SCHWEIZER GmbH & Co. KG! Since its foundation in 1994, SCHWEIZER in Tennenbronn has been your experienced, reliable and powerful partner for the complete machining of milled parts as well as for assembly production and assembly. The range of our materials ranges from high-strength aluminum alloys through non-ferrous metals and various steel alloys to numerous plastics. Our customers include well-known companies from the fields of laser technology, mechanical engineering and tool making.

Mandatec AG has been manufacturing mechanical components and assemblies for customers in the mechanical engineering and hydraulics sectors since 1986. Thanks to the high degree of automation and standardization, we are able to supply our customers with ready-to-install and economically manufactured precision parts from batch size 1. In addition to complete cubic machining using 5-axis milling, surface grinding and 3D measuring, we complete our range of services with high-pressure water jet washing at pressures of up to 850 bar and residual dirt analysis to document the technical cleanliness of components in accordance with VDA 19.1 and ISO16232. Translated with DeepL.com (free version)

The Stahlwasserbau Beeskow GmbH is a regional leader in the fields of steel hydraulic, materials handling, industrial and commercial service. We offer our customers complete solutions from a single source - engineering, production, installation, maintenance, service and repair. Here are excellent quality and flexibility to the company's strengths. Achieving total customer satisfaction, but we work with our more than 80 employees every day. In 2015 we won the Innovation Award of the State of Brandenburg and have been awarded in 2016 as a finalist at the Grand Prix of the middle class, which we are very proud.

Production of simple to complex CNC short and long turning parts, and chuck parts up to diameter 300 mm with modern equipment (since 2008, for example. Multifunction turning center OKUMA MAC TURN!), V2A and V4A are our strength but also cutting steel, aluminum and brass .. . Batch size 10-100000 pcs Milling on machining center to parts of size 500x500x500 at low prices from 10 to 10,000 pcs. Lot size MUZ designed according to customer's requirement machinery, special purpose machines and implements its implementation to the final product or system as a complete package. Due to the family-related Locksmith, we are also able to customize welded structures quickly and kostengünsig. The bodyshop directly in the annex building permits without long transport routes to paint the machine components. Our strength is flexibility and performance! At this point you will get an overview of the company MUZ mechanical engineering and machining: Design, planning and manufacturing of lathe parts, short lathe and CNC lathe and CNC milling parts are our core competencies.We are able to manufacture both prototypes as well as large production runs reliably and on time. We build your machine, system, or like to only your module completely incl.all units, electrics, hydraulics and pneumatics. Through our incredibly powerful machinery we are able to also realize your machines, special purpose machines, systems or assemblies quickly. Come to us if you are around a professional partner ... Require milling parts, CNC machined parts, Aludrehteile, aluminum turned parts, turned parts, short turned parts, CNC turning parts, dental machining parts, stainless steel turned parts, deburring, glass fittings, glass canopies, plastic machining parts, Grinding parts, point holder, lathe parts, glass fittings, glass point fittings, stainless steel end caps and machining. Our knowledgeable staff look forward to your wishes and ideas. Do you need high-quality services, a sustainable service, expert advice and an easy and cost-effective processing? Come and join us, your MUZ engineering and machining, YOUR STRONG PARTNER.

Containers and tanks in all materials, shapes and sizes e.g.: GFK (glass fibre reinforced plastics), PE-HD, PP, PVC, PVDF and as composite material like PVDF/GFK or PP/GFK carried out as round, rectangular, oval or triangle containers / tanks, also with insulation and / or cooling and heating mechanisms for special assemblies. Milling and turning parts made of all plastics (precise CNC-machining of PP, PE, PVC, PVDF, PTFE, etc.)

1. A bit of history - 2017 Bledar Kthupi graduated in engineering. Electronics at the Polytechnic of Tirana in 1998, after approximately 23 years of experience as a turner, miller, reamer and production manager, in various metalworking companies, with the technical and economic support of Suela Llalla, as administrative manager they gave life to the BIKS. - 2018 BIKS offers consultancy service for precision mechanical parts for some of its customers who mainly deal with carpentry. - 2019 BIKS begins to become a supplier by acquiring, developing and supplying orders or finished details in addition to metalworking consultancy. - 2020 BIKS signs a collaboration agreement with Marca&Volta srl for which it will deal by offering a technical-commercial consultancy service for the orders to be outsourced. - 2021 Bledar acquires 10% of the shares of Marca&Volta srl and BIKS srl confirms and improves the performance of its operations. - 2022 Bledar becomes production manager of Marca&Volta and BIKS from January 2022 is entitled to take advantage of 100 hours of machine tools at the Marca&Volta workshop. Erald Miraka began his career at BIKS as an engineer and is still Junior Project Manager and Technical Sales Assistant. - 2023 Begins the collaboration with BIKS, Arlinda Nerguti who deals with Back-Office and market research. - 2024 BIKS is looking to strengthen its results. 2. Mission Biks wants to be the trusted supplier of CNC machined parts, small, medium and large carpentry, of equipment designed and manufactured as needed but above all it wants to be your solution provider. Biks believes in the relationship of trust and mutual growth with the customer-partner, basing the relationship on the use of all its technical-commercial baggage and its professional ethics. 3. BIKS SRL Bledar Kthupi - Ceo-founder // bledar@biks.it - +39 340 905 7248 Suela Llalla - Financial & Logistic // invoice@biks.it - +39 327 079 4037 Erald Miraka - Technical & Dev. // em@biks.it - +355 68 805 5845 Arlinda Nerguti – Back-Office, R&D // linda@biks.it - +39 327 079 4037 4. Short-term goals The commissioning of the platform: MACHISTE.COM which will allow customers to have a guaranteed quote within 48 hours in 75% of cases. The commissioning of the new headquarters with approximately 500m2 indoors and 300m2 uncovered. The completion of the procedures for the acquisition of ISO9001. 5. Why choose BIKS • With Biks you can improve the times and costs of your supply. • With Biks you would have a single interlocutor even for your most complex projects. • Maximum confidentiality of all drawings and projects. • Clear and agreed work cycle. • Agreed technical solutions for every need. • Promptness and punctuality in communications and deliveries. We can produce the simple washer, the gear wheel with induction hardening and 3D profile control and steam seal rings for gas turbines. Obviously, the simpler the product, the easier it is that the possible customer can find it on his own without having to pay BIKS. The more complicated and complex it is, the more likely BIKS is to become the best solution as it is the turnkey supplier of a quality product. 6. In what we are able We are able to supply Turned parts, prototypes, small series or mass production. Minimum diameter 5mm, maximum diameter 1600mm for 18,000mm length. Milled parts in soft steel, stainless steel, aluminum and plastic using 3, 4 and 5 axis milling machines with Maximum capabilities 2000x2000x15.000 Sheet metal parts, cutted by laser, by plasma or by waterjet, punched, bent or calendered. welded parts from Tig Mig or other technologies. BIKS S.R.L. Sede Legale: Via Paolo Gerolamo Brusco 1/4, 17100 - Savona (SV), Italy E-mail: info@biks.it Website: http://www.biks.it VAT/P.Iva : 01867890095

C.M.B. SRL is a company specialised in the industrial assembly of mechanical, electromechanical and electrotechnical components, the pre-assembly of units and the assembly of automatic and semi-automatic machines. Our job is to support companies to produce: we propose ourselves as your production partner and we can follow the entire production process, from design to the finished product. In over 40 years of activity, we have structured and organised ourselves to develop and implement this activity for every industrial sector. Our experience and energy have always been oriented in this direction because we want to produce technology, technical excellence and innovative products. We are specialised in the production and machining of carpentry, industrial assembly of mechanical, electromechanical and electrotechnical components, pre-assembly of units and assembly of automatic and semi-automatic machines. We also have in-house machining and repair departments, a robot island, a collaborative welding robot and an industrial painting area. We are complementary and synergetic for all electronics, automation and software houses.

Die heutige DEURINGER GmbH wurde im Jahre 1989 vom Firmeninhaber Wolfgang Deuringer, als Einzelfirma gegründet. Erstprodukt: CNC-Fertigteile nach Kundenzeichnungen 1992: Beziehen des Neubaus in der Adolph-Kolping-Straße 2 1996: Erweiterungsbau - Materiallager 1997: Umbenennung in DEURINGER GmbH 1998: Erweiterungsbau und Außenanlagen 2001: Erweiterungsbau Ausbildungswerkstätte 2003: Erweiterungsbau Bürogebäude 2004: Neubau Kantine/Schulungsraum 2005: Erweiterung der Fertigung (Drahterodieren) 2007: Neubau Lagerhalle Unsere Fertigung erstreckt sich auf über 1000qm, auf der mit modernsten Maschinen hochwertige Produkte entstehen. Wir fräsen, drehen, bohren oder schleifen Einzelteile, Serienteile und komplette Baugruppen für: - Transporteinheiten - Dämpfereinheiten im Bereich Auto- und Motorsport - Elektrotechnik z.B. kpl. Lichtleiter-Verbindungen, Kühlkörper, Gehäuse, Aufbauplatten - Logistiksysteme der Zuführereinheiten, Transportsysteme - Papiermaschinen, Verpackungsmaschinen und Kartonagen - Strömungstechnik z.B. Ventile für Sonderpumpen, Verteilungssysteme für Luft und Öl, Düsen - Recyclinganlagen z.B. Kameragehäuse, Sotiereinrichtungen - chemische Anlagen, über- und Unterdruck-Einrichtungen, Verschlüsse an Gehäusen Unser Unternehmen hat sich heute als Lohnfertiger mit folgenden Fertigungsarten etabliert: CNC - Drehen, Einzel- und Serienteile CNC - Fräsen, Einzel- und Serienteile Flachschleifen und Drahterodieren Innenrund-und Außenrundschleifen Fertigung von Systembaugruppen auch mit Elektrik Härten