We are a small, ambitious sub Nehmenen, which consists of 1992 and currently has 20 employees. Our basic activity is mehanische metalworking. Above all, we carry out the services, depending on customer custom, but we also have the possibility to create different raw materials: Round steel up to 500 mm FI (42CrMo4V, 30CrNiMo8V, St 52-3 ...), various seamless tubes, Sheets in Various carefully selection and dimensions allerarte profiles, castings and Forgings ...

Tech3 Systems is an innovative young company which on the basis of several years of experience and cutting-edge technological equipment seeks the best, top quality solutions in the field of industrial automation and machining (milling and turning). We offer advice to our customers and develop excellent projects using our know-how – from the concept to the finishing manufacturing stages. Our own machinery and excellent knowledge in the field of machining, installation and industrial automation enable us to manufacture test and assembly devices and mechanical assemblies that are fully adapted to the needs and desires of our clients. A team of the company’s young professionals with broad expertise covers a wide variety of fields and produces as well as develops products aimed at the optical, laser, electrical, pharmaceutical and food industries. The company develops test and measuring devices for testing various semi-finished products. Using machine tools that we have at our disposal we can manufacture semi-finished products at our customer’s request and also incorporate them into the final product, ready to be sold on the market. So far, we have produced more than 80 testing machines for semi-finished products. An important company guideline is our continuous investment into the knowledge of our employees and the use of quality materials as well as cutting-edge technologies which is reflected in our customer-friendly project execution and the excellence of our services. We also provide our customers with professional assistance and support in the most complex segments of industrial automation which require special care, know-how and experienced personnel. We process a wide range of different materials such as copper, aluminum, stainless steel, brass, technical plastics, etc. The company's vision is to become one of the leading companies in the field of industrial automation and the manufacture of mechanical assemblies. We are a creative and ambitious team and with our proprietary innovative technologies we have developed a responsible attitude towards our customers as well as the environment. We strive to maximize effects at the minimal cost while eliminating any concerns our customers might have regarding production interruptions, poor quality, untimely deliveries, etc.

Production of CNC turning, milling and grinding work, complete assemblies, tool holders for CNC machines, Technologies: high-speed form grinding, milling, 5-sided machining, turning main and counter spindle with driven tools, DNC programming station

With our machines we cut sheets for you with a material thickness of up to 10 mm and a length of 6 m. Our edging benches handle every edging up to 6 m in length and 10 mm in thickness with 460 t of pressure.

This company was founded in Viernau, a village located in southern Thuringia, Germany, and it has been active in hardware manufacture ever since. We are a futureoriented company noted for our flexibility, quickness, and high quality. Our production, warehouse and administrative buildings extend over more than 4000 sqm. Our range of manufacturing includes products for the automotive, heating, building, and electrical industries.

Are you looking for a partner for professional filming? Then you've come to the right place. From simple turned parts to sophisticated drawn parts, we offer everything your heart desires. Are you looking for a reliable supplier of pressed, stamped, and bent parts? Here, too, we offer you expert advice based on decades of experience. We are happy to accompany you from the pilot series and initial sampling to series production. Tell us your ideas and we will implement them cleverly for you! Numerous companies from the automotive, mechanical engineering, electrical engineering, medical technology, and other industries have been relying on the expertise of our employees for many years. Let us convince you too! Thanks to our high-quality QA, qualified personnel, cost-effective warehousing, and modern ERP system, we are able to execute your orders on time and without errors at all times. Examples of our products: Output shaft, axle, adapter, drive shaft, mount, bolt, bushing, cover, end piece, eccentric, spring, flange, guide, guide roller, housing, threaded ring, half-round rivet, sleeve, insert, taper pin, block, contact pin, roller, sleeve, nut, hub, rivet, plate, bolt, ring, pipe part, round plate, hinge, washer, screw, countersunk rivet, countersunk screw, pin, stud bolt, shaft, angle bracket, gear wheel, cylindrical pin, and much more.

Our key competences are gearing, CNC turning and milling of steel-, aluminium- and copper alloys, as well as numerous cast alloys, drop forging, welding up to the manufacturing of special drives, couplings and machine components. We deliver as well single components and modules according to the drawing of the customer, as well as drive- and machine-elements ready for installation. We manufacture in ISO 16949 / ISO 9001 certified factories customer related for many industries such as: • Machine – and plant engineering • Drive technology/ gear manufacturing • Vehicle construction/automotive • Agricultural machinery/hydraulics • Production of steel, cement, petrochemicals and energy

Our business: producing high quality CNC turning and milling workpieces in steel, non-ferrous metal, plastics and other auf CNC-Lath-Milling-Center, CNC-Lathes, CNC-machining centre in orderd precision considering form-, orientation and location tolerance gage control with Coordinate Measuring System and Contur Instrument Our characterize: we are DIN EN ISO 9001:2000 certificated by TÜV-Cert and we are an accredited company by the chamber Handwerkskammer Wiesbaden for Master Craftsman in precision mechanics we qualify our employees an ERP-System ensure our work flow can handle datas and detail drawings Our customers: in the branche of hydraulic pneumatic mechanical engineering precision mechanical medical and laborattory technology automotive- and electrinic industry

AUTOMAC is your partner for innovative and reliable solutions in the field of special machine and plant construction, steel construction, handling equipment, vacuum lifting equipment, as well as the cabinet and in the field of contract manufacturing. We ensure that you get technically perfect equipment so that you can produce cost-effective and reliable. The benefits for you ● Design according to customer services. ● Maintained and tested machinery and equipment. ● Competent advice. ● Cost produce by cheaper investment. ● products with high quality standards. ● Meeting promptly manufacture of our products. ● Installation, maintenance, commissioning and service Services for the end user: ● Design according to customer services ● Plant ● Steel Construction ● Welding ● Samples and Sonderbau ● serial production ● cooperation in product development Contract Manufacturing: ● Turning, milling and drilling ● installation work ● welded assemblies ● coloring NEW! Flame cutting Service / burnouts plasma / oxy fuel cutting machine up to 150 mm thickness. Work table 6000 x 2000 mm Plasmamakieren, plasma graining possible. Welded assemblies, welding technology Reparaurdienst. Sandblasting of the modules / burnouts! Large suitability proof! Cabinet: We design, build and install cabinet systems in different designs according to the specific requirements and operating standards of their customers from the mechanical engineering and plant construction. The spectrum ranges from small control panels or panel to the simple cabinet to large cabinet lines - from the PC cabinet enclosures for up to big benefits. All procedures during project planning and production are subject to continuous quality control. Each cabinet is tested prior to delivery in accordance with the relevant national and international standards and wired to desire location worldwide and put into operation. Our products As a provider in the field of special machine and plant construction, steel construction, handling equipment, vacuum lifting equipment, as well as the cabinet, we offer a wide range of products and services. The products listed below are representative examples of our product portfolio dar. We develop customized solutions for you. Talk to us! ● Plant for the precast concrete industry ● conveyor and picking ● Milling Machines ● Handling Systems ● Lift Tables ● Storage Systems ● Presses ● Test Stands ● Welding and special devices ● Heavy load handling equipment (cranes) ● Vacuum lifting equipment ● Separation systems ● equipment for foundries ● Wrappers ● Special Machines ● Steel Construction ● Contract Manufacturing ● Service Services ● Control cabinet

Pasat-Metal Ltd. – Silistra is a Bulgarian private company established in 2011 as a successor of the activity of Sole Trader ET ‘ Krasimir Valev’, founded in 1995. -Pasat-Metal Ltd. is a manufacturer of precise turned-mill components -Supplier to a wide range of industries -Modern automated machine park from renowned brands -Highly motivated team of professionals -Full control and guaranteed quality through implementation of ISO 9001:2015 -From prototypes and small batches up to large volume production -Own production site of 2000 q.m. in 7500 Silistra, Bulgaria

Storz machining technology has for many years been a partner in the metalworking industry and is a successful supplier of turned parts. We manufacture parts for engine, automotive, parts of hydraulic and pneumatic systems, as well as for companies in the tool industry. Storz Cutting is now a company whose products are in use worldwide. Quality Our customers can be found in our manufacturing potential for almost any task an intelligent solution. Equipped for mass production, for the production of small and medium series and for the prototype is available, our machine park available. The ever-increasing demands, we will continue to meet. We compliment and continually optimize the stock. Of course, we are certified according to DIN ISO 9001:2008. Products CNC machined turned parts on lathes CNC turned parts with milling Various turned parts Machined turned parts on Conventional lathes Turned parts with different surface treatments Rationalization Talk to us, we will happily show you what rationalization potential in our company during machining are possible, and not only in raw blocks, but also in the production of semi-finished products with the use of profiles and pipes profitable savings. Let us convince you of the all-round, longitudinal, frontal and

Our production includes the complete machining of small to large parts, conventional or CNC machines. According to drawings or samples, we produce single parts or small series on modern machines, as a finished part or as wage labor of individual machining operations. We are a reliable supplier for their machine components. The detailed description of the manufacturing we offer, please see our list of machines. Our extensive range of machinery allows us to determine the appropriate type of production by manufacturing and workpiece-oriented criteria and thus comply with agreed delivery times.

IR-S CNC TECHNOLOGY

HUMMEL AG is a world-renowned manufacturer of cable glands, connectors, heating and plumbing products and customers turned parts with more than 350 employees. Since its founding in 1948 HUMMEL enforced by entrepreneurial instincts and innovative technology to the markets of the world. Own locations in southern Europe, the Far East and South America are the logical consequence of our international growth. At the headquarters Waldkirch advanced technology of the machinery guarantee precise, flexible and efficient production with the highest quality and service for the customer. Metal & Plastics Technology The metals and plastics technology (MK) contains the complete production facilities of HUMMEL AG. Especially the HUMMEL products are manufactured according to ISO 9001:2000 On a production area of over 8,000 m²: * Cable Glands, * Circular Connectors, * Vent valves, .... These manufacturing facilities also allow for customized solutions. With our advanced machinery and equipment park and the know-how acquired over 60 years of metal and plastic processing, we produce customized special parts for other well-known manufacturers, such as from the Heizkreisverteilerbau, from the electronics and automotive supply industry, building musical instruments and from the Optoelectronics . HUMMEL underscores not only its own product quality, but also offers the customer nor the HUMMEL quality for its own products. The MK business currently employs over 120 employees. The power spectrum of HUMMEL includes: Materials: Non-ferrous metals (brass, aluminum, nickel silver, bronze, etc.), Automatic turning steels, stainless steels Plastic (injection technology, bar stock) Zinc die casting Dimensions: Multi-spindle ø 5 mm to ø 52mm Single-spindle ø 8 mm to ø 100mm Machinery Machining / Injection: Ring Dreher (material from the ring) ø 0.5 mm - 5mm CNC single-spindle ø 5mm - 100mm Multi-spindle cam-controlled ø 5mm - 52mm Multi-spindle CNC ø 8mm - 52mm CNC lathe for machining chuck dia 160mm Machining centers Zinc die casting Plastic injection molding machine (clamping force + parts by weight) Vertical injection molding machine for molding of parts (washers) Assembly: complete assembly (Small and medium series) Coating: galvanic coating

CNC machining and conven Ionele series parts in optimal Losgrossen of 30 pcs and more. Welding parts with CNC machining to the next weight 30 kg. Bearbeitug CNC turning, Fräasen, Drilling, Schleifen.Wir can also save heat treatment and surface treatment. We process steel, STAINLESS steel, aluminum.

Company in sheet metal processing active Laser beams, Bending, Welding

Our young company was founded in spring 2020. Röhle CNC-Zerspanung belongs to the metal processing industry. You can find us in Spremberg, which is centrally located approx. 90 km north of Dresden and approx. 130 km south of Berlin. Our services relate to the production of milled and turned parts in the 5-axis area. Individual customer requests are carefully considered and solutions are found. You have a project, we have your solution.