If >>> not - there's not Following this motto we combine for more than 15 years of production engineering for the complete machining sophisticated machine components productivity and flexibility with the help of horizontal machining center to a economic optimum. Our services include turning, drilling and milling of large, complex hydraulic components, Machine parts for large vehicles and special purpose machines. Our strength lies in the consistent use of the latest manufacturing technologies. Even turning operations of cubic parts whose processing have usually been very labor intensive to conventional lathes was, can with us on one of the BAZ through the use of combined Rotary milling are carried out completely in one setting. The hereby achieved increased process safety and significantly reduced tooling and clamping times are Benefits that we like to pass on to our customers. The connection of the BAZ to a FMS pallet rack system with 60 pallets and a total of 940 tools allows us sufficient machine pallets to store retrievable using appropriate clamping technology. Thus we are able at any time to react flexibly to customer demand absolute, even in small quantities. The slim structure of a small enterprise, 25 committed and qualified employees, a manufacturing engineering Organization at the highest level and of course quality "Made by MUZ" are the benefits that our Know how to use in long-term partnership clients. Interested? We see your inquiry on gladly!

mbo Osswald has been in existence for more than 50 years now, and that name has just as long been a guarantee for high quality mechanical linking elements. Usage of the latest manufacturing techniques guarantees top quality and rapid delivery times. Our Products made of steel or stainless steel (V2A, V4A, Niro, 1.4305, 1.4404, 1.4301, 1.4571, 1.4435) - Clevises, DIN 71752, DIN ISO 8140, clevis joints, DIN 71751, clevises with male thread, clevises with elongated hole, clevises with hardened cross hole, mating pieces for clevises, folding spring bolts, bolts, cotter bolts, DIN 1443, DIN EN 22340, ISO 2340, DIN 1444, DIN EN 22341, ISO 2341, threaded bolts, DIN 1445, angle joints, DIN 71802, axial joints, ball studs, DIN 71803, rivet studs, housings, DIN 71805, ball joints, rod ends, DIN 648, DIN ISO 12240-4, pivoting bearings, DIN ISO 12240-1, rod ends hydraulic, DIN 24338, ISO 6982, DIN 24555, ISO 8133, shaft retainers, retainers, locking washers, DIN 6799, retaining rings, DIN 471, joint rods, machine parts – are standard. We are also the right partner when it is a question of special parts. We manufacture precision turned parts (CNC turned parts) and milling parts in accordance with your specification or offer you the benefit of our know-how to find solutions to your special applications. Our machinery is characterised by high flexibility, special repeat accuracy and short machining times. For you, this means economical production of simple workpieces or even of geometrically complex parts of high-tensile steels with closely toleranced dimensional and surface specifications. We can manufacture for you rod parts and shaft parts made of steel, machining steel (1.0718) and stainless steel (V2A, V4A, Niro, 1.4305, 1.4404, 1.4301, 1.4571, 1.4435) with diameters of 4 mm to 65 mm up to a total length of 650 mm. In particular, cross-holes, turned grooves, millings, multiple-edge turning and complicated geometries can be executed. Whether you require pilot, small-lot or mass production of your special part, we guarantee short delivery times and especially economical manufacture. mbo – Systematic solutions for linking technology

Using its experience gained from a long-standing tradition in massive forming and subsequent machining, Schmiedetechnik Plettenberg produces high-precision components for international customers in the automotive and non-automotive sectors.

The company Brünink-Neuenhauser Metallbau was founded in 1953 by the master blacksmith Albertus Brünink. Today the company is run by the second generation of the son of the founder, Bernd-Heinz Brünink. The company Brünink is a family tradition and its own production.

Widmaier-Mechanik GbR has been your reliable partner in the manufacture of sophisticated individual parts and small series for over 30 years. What sets us apart: SPEED – through our 24/7 CNC EXPRESS service FLEXIBILITY - high level of vertical integration for optimal delivery capability SCHLAGKRAFT - committed and highly qualified team INNOVATION - continuous development and marketing of new products PRECISION - our drive

Our company was founded in 1949 by Otto Rimmelspacher in Karlsruhe. We are a universal oriented Lohndreherei and Lohnfräserei. In addition, we are able parts made of steel, stainless steel (V2 and V4) or special materials to weld such as Hastelloy and titanium. Dimensions: Ø20 - Ø300 mm, length up to 3 m, weight up to 200 kg, TIG manual welding, welds with a programmable TIG circumferential seam welding machine. From customers demanded extra-tests of the welds are performed externally. (TÜV, DEKRA, x-ray exams, FE exams, etc.). Furthermore, we can turn, mill and weld plastics. (Heating element sleeve welding or hot air welding). Our metal welders are TÜV - tested according to "EN 287-1141 T". We also process steps according to "DIN EN ISO 15614-1" and "QW-483", and admission AD2000 Module A1 according to Pressure Equipment Directive 97/23/EC. We are also Materialumstemplungsberechtigt for "10204 EN 3.2" At a certification according to "DIN EN ISO 9001:2008" we are currently working, we will complete this certification in the first quarter of 2011. Furthermore, we manufacture eductor and air Reisser according to customer specifications. Eductor are used for pumping water in wells, in low-lying water table. Air Reiser care in domestic water systems for a Constant air cushion in the air pressure tank. These products are designed and manufactured specifically to customer requirements, such as flow rate and head. For more information, please refer to the brochures in our download area. Our 15 employees are almost exclusively skilled metal workers who work independently and know that it comes down to it. On lathes we have conventional center lathes up to a peak height of 250 mm, as well as various CNC lathes Company INDEX to a turning diameter of 300 mm and a tip length of 1500 mm, with and without tailstock, with and without bezel. Our largest center lathe can handle rough-and-work on waves up to a length of 2500 mm and a peak height of 350 mm. Focus of our production is the production of single parts and small to medium series for industrial customers, such as nozzles and diffusers. We also manufacture complete pressure vessel according to customer specification, including flanges according to DIN and ASA. One of our NC lathes can also be operated with hydraulic shuttle chucks for housing to NW 25 or NW 32, the processing can thus be made on 4 sides in one clamping. In NC milling we have a CHIRON machining center with 36 tools and four programmable axes, the fourth axis is set up as a rotary axis. Maximum process paths X = 1600mm, Y = 400mm, Z = 415 mm. In addition, we still have a smaller machining center with 8 tools for drilling and thread to M 12 in steel. Quantity Spectrum 1 to 1,000. A CNC lathe is equipped with an automatically operating portal charging system for chuck parts up to max. Diameter of 120 mm and a maximum weight of 5 kg set.Here we can also realize larger batch sizes. For painting, we have a small spray booth. Can we have a customer, such as galvanized surface coating, not solve yourself, we cooperate with reliable partners.

High precision, complex turning, milling and grinding parts - from 4 mm to 1,800 mm in diameter and up to a length of 2000 mm and finished assemblies, ball screws and motor spindles for the automotive, mechanical engineering, power tools, aerospace, heating and Building Construction. Manufacturing capabilities work Wertach: Turning and Dreh-/Fräsbearbeitung to Ø400mm, length up to 1000mm Milling and Fräs-/Drehbearbeitung cubic and rotationally symmetrical parts to ø1800mm, length up to 1000mm. Feinstbearbeitungstechniken * External grinding part length max 3000mm, 1000mm ø max * Internal grinding part length max 1400mm, 1000mm ø max * Spline grinding ø max 300mm, length up to 800mm * Spline grinding groove width 4mm to 40mm groove width 220mm Ømax * Surface grinding 800x400x500mm * Honing ø4 to Ø72mm Heat treatment: quenching and tempering, case hardening, carbonitriding, vacuum hardening, annealing, Kurzzeitgasnitrieren, carburizing, induction hardening and freezing Deep-hole drilling Clear Deburring Production spectrum ballscrews Diameter 12-125mm Thread length up to 3000mm Gradient of 2.5 mm to 50 mm a and mehrgänging Investment type: 2-or 4-point system Accuracy classes 1-3-5-7-10 ISO 3408 Feritungsverfahren whirled / ground Special threads on request The stiffness

Deformation of cold rolled strips with press: In the field of classical stamping production is possible on eccentric presses from 40 to 250 tons, as well as hydraulic presses up to 250 tons. The product size ranges up to about 500 mm in length and 4 mm in thickness. Fine blanking: Fine blanking is a special technology or so-called punching "without air" between the Schneidematrize and the knives (0,5 - 1,0%). This method is especially useful for highly sophisticated products in question, which are dentate different. The maximum length is about 500 mm, and the maximum width of 6 mm. This allows the tolerance of + / - 0.01 mm, a uniformity of the cut edge and the clipping with minimal needle on the edge. Drawing and deep drawing: Deep drawing is a mode of production, with the preparing various hollow shapes such as rivets, drawing dies, industrial electric parts and the like. The diameter ratio to the length is up to 1:2.5. Of course, these products have a smaller extent, forExample up to 20 mm. Screws: TKG doo manufactures screws of the small range in diameter from 2 to 6 mm and using the most advanced technology of cold deformation, which has displaced pivot screws in the world due to their cost-effectiveness. TKG provides doo screws forth in accordance with the ISO and DIN standards. We also produce special screws design according to the plans and patterns in collaboration with technologists and designers of customers. Screws can be thermally edit and galvanically protect, depending on the location and type of operation.

Industry suppliers for the machinery and plant engineering. Manufacturing designs from sheet metal and tube. Material processing of steel, stainless steel and aluminum.

We have years of experience in machining and electroplating. We provide one-stop services from consulting and CAD and CAM to procurement of materials, fabrication, and delivery. We approach each job focusing on reliability, professionalism, and on-time delivery. We provide routine progress feedback. Our extensive processing facilities provide high capacity for different work methods (including milling, turning, and cutting). Your business is always welcome!

RK and case production Blechbearbeitungs GmbH is a metal processing plant specializing in sheet metal processing. Your partner for single and series production. We manufacture our products from steel, stainless steel, aluminum or other non-ferrous metal sheets and profiles, among others, with the latest CNC sheet metal and laser technology. On request we deliver our products powder coated in RAL color of your choice. Our staff is composed of highly qualified and motivated employees. Our guiding principle Innovative sheet metal working to perfection through design and process optimization.

Productions in Zarifsan are processed with appropriate machines according to the request of customer. Zarifsan produces parts with different measurements and amounts for automotive, white goods and machine industries. Injection needles, miles and bodys some kind of parts that we produce. Just in time strategy is used in production and also all other processes. Steel, yellow, aluminium rawmaterials use at productions in our firm. Heating and coating processes are made to contract manufacturing at firms of versed in business experience. Quality is one of the most important thing for production in Zarifsan and this rule is also valid for other processes. ISO / TS 16949 and ISO 14001 quality management systems have been applied successfully for many years. Our philosophy is producing appropriate parts at appropriate conditions.

We are a medium sized company that has specialized in the field of turned and milled parts (batch sizes up to 5000). The Turning is currently conventionally possible. We mill with a geometrically-new Universal Milling Machine (CNC Deckel FP3-50 covered). Furthermore, TIG welding (aluminum / steel). Exemplary technologies: Machining: (Lot sizes: min 1, max 1000..) Machining: (Lot sizes: min 1, max 5000..) Combined machining turning (with milling): (Lot sizes: .1 min, max 100.) Wave processing: (Lot sizes: min 1, max 50.). Milling of the rod: (Lot sizes: min 1, max 500..) Milling (2 1/2 D): (Lot sizes: min 1, max 200..) A full view can be found under the tab "technologies". Exemplary materials: Mild steel, stainless steel (rust-proof V2A, stainless, acid-proof V4A), free cutting steel, but aluminum and aluminum alloys and titanium and titanium alloys. The full panel can be found under the tab "Materials".

Unic is a medium size company (fifty employees) with more than 40 years of experience in precision machining on customer drawing as well as on standard production according to our catalog articles. The workshop has a production area of 4.500 sq.m. with a machine park that includes CNC lathe machines, transfer machines and 5 axes machining centers. The company has a noteworthy experience in machining of lot of different materials, but, the most important volumes are reached in the machining of brass,stainless steel, steel and aluminium components. Unic also purchase rough material, as brass, steel or aluminium casting. In addition to different mechanical machining we are able to offer (thanks to external cooperation) treatments and surface finishes as for instance standard or chemical nickel coating, chrome plating, brushing, anodizing, the company is then able to supply a finished product as well as mounted groups. Unic is certified according to ISO 9001:2008. Is also available a catalogue for those articles produced by themselves related to the standard production referred to standard and automatic fittings, brass and stainless steel fittings, safety valves, taps and accessorizes.

Engineering company with 65 employees in family ownership - Modern Locksmith up to 20t with welding robots - Large parts 5-axes simultaneously to 18.0 x 3.5 x 3.0 m / 60 to - 3D measuring machine - Painting and possibly assembly - Modern and efficient production - high flexibility - high quality

Aluminium foundry All major aluminum casting alloys Chill casting in gravity and tilt casting Sand casting HWS molding machine molding box size 850 x 650 x 250/250 mm Heat Treatment Steel shot blasting Vibratory Grinding Machining: milling to 5-axis machines and turning

> Specialization in single part production / contract manufacturing in the field of CNC - turning and milling, on assembly production and special machine construction > Machining of various materials eg quality steel, stainless steel, non-ferrous metals, plastics > Production and mechanical processing of welded constructions made of steel, stainless steel and aluminum > Implementation of surfaces and heat treatment

MaS - Solutions offers top-notch surface finishing and industrial painting for small parts, as well as assembly of components. Our expertise in surface refinement and precise assembly processes ensures the highest quality and efficiency. Trust us to deliver your components in perfect condition and on time. We are your reliable choice for industrial solutions.