For the markets mechatronics, lighting technology and optical fiber technology WALO - TL develops and produces customized solutions for mechanical, electromechanical and optoelectronic parts, products and device applications, from prototypes to series.

Workings: turning milling correction induction hardening Components: Sleeve Pin joint shell Flange Spacer

Werkzeugbau Wörgartner GmbH was founded in 2005 by managing director Peter Wörgartner. Since its founding, the company, as well as its machinery, have been constantly growing. Through close and in-house cooperation with Wörgartner Produktions GmbH, expertise and many years of experience with punching and sequencing tools are combined in particular. This makes it possible to achieve targeted results of the highest quality in record time. Werkzeugbau Wörgartner GmbH uses a large part of its capacities to produce spare parts for its customers. Numerous wire eroding machines, as well as profile grinding machines and flat grinding machines, are available for this work. In addition, there are not only a few 3-axis milling machines and a 5-axis milling machine with pallet changer, but also 3 5-axis HSC milling machines, specifically for processing hardened materials and also hard metal. However, Werkzeugbau Wörgartner GmbH not only supports you in the production of contract tools or spare parts, it also provides you with expert advice from the entire design department. Many years of experience in this area have already led to lasting partnerships in many areas and projects. So if you are looking for a partner who will support you in all areas of toolmaking technology, from planning to the finished part, then contact Werkzeugbau Wörgartner GmbH.

Production service aspiring to perfection We are happy to take on highly complex production assignments for our customers and to elaborate quality solutions which aspire to achieve perfection. Every division of ZELTWANGER Maschinenbau GmbH takes this ambitious aspiration as the quality standard for its day-to-day work. But the most important factor in our company is its workforce: a rock-solid, totally reliable team of men and women whose commitment and enthusiasm for their work and the manufacture of top quality products spurs them on to achieve ambitious standards and ever higher performance with each passing day. It is this motivation which has created scope for our extreme work time flexibility. We produce in two to three shifts six days a week. Our entire technical innovative drive and resolute quality orientation are channelled into the production of challenging prototypes, complete assemblies, small-scale series and individual components. Production processes High-tech is the standard at ZELTWANGER Maschinenbau GmbH. This is reflected in our highly qualified team of specialists, in our logistical division of labour, and in our use of the very latest production processes and technologies. Our machining centres and lines are programmed and controlled over a central network. Innovative 3D programming systems permit even the most complex workpiece contours to be machined. In the metal cutting field, our CNC milling centres use 5-sided machining techniques. All our lathes are fitted with power tools and with a C and Y axis. Our products are characterized by optimum grinding results with millimetre range precision for the ultimate in productivity. With our high-precision spark erosion cutting machines we also have the capability to manufacture custom-produced parts and small-scale series in-house. Materials - broad selection, quick availability Alongside our extensive ultra-modern machine outfit, we also benefit from a wide range of stocked materials in our automatic high-bay warehouse. These include all steel, titanium, stainless steel and high-strength alloys as well as all popularly requested aluminium alloys. We also offer a raw material procurement and storage service to customer order.

The company Karl Pieper GmbH & Co. KG since 1927, a specialist in engines and machinery, as well as for metalworking. Mechanical Engineering - Machine Shop - grinding

We are the leading European manufacturer in the Packaging industry, with factory located in Pliska, Bulgaria (45 km. from Black sea). We offer solutions in Turning parts - series and single; / Milling parts - series and single; / Grinding - cylindrical and flat, EDM - wire and sinker. Design, custom manufacture and repair of Tooling and Machining such as Injection molds and Dies. We are interested in longterm partnerships with West-European companies. We offer you the best price, short possible leading times and personal attention. Our industries of preference: Automotive, Automobil, Nutzfahrzeuge, Non-Automotive, Packaging, Verpackung, Pneumatic, Pneumatik Industrie, Hydraulic, Hydraulik Industrie TIHERT is part of the group HERTI -group.

In our workshop, we manufacture fine cutting tools since 1985. Our affordable products of excellent quality can be used for each type of material you want to process. We also undertake repairs to existing tools. Our expertise enables us to meet even the most specific requirements for special cutting tools which are not commercially available, allowing you to save time and money. In our workshop, you will find all kinds of machining constructions as well as grinding surfaces and cylindrical. With over 30 years of experience, we continue to innovate in manufacturing and shaping of cutting tools. Following up step by step the technological evolution, we have four AKIRA SEIKI vertical machining centres -a five-axis (4 + 1) and three three-axis, as well as a three-axis CNC lathe. We use CAM/CAD NX UNIGRAPHICS SIEMENS to design and program. For the quality control, we use a CMM of Tesa. The combination of technological knowledge and modern equipment allows us to meet the needs for quality products and reasonable costs, both in cutting tools manufacture and general machining. We use high quality materials accompanied with all the necessary certificates, whenever needed.

RICH Precision means that we manufacture for you absolutely precisely and of high quality. We specialize in the manufacture of precision turned parts and the manufacture of complex workpieces that are manufactured on turning and milling centers. The assembly of assemblies is taking up more and more space.

Individual cables and components for mechanical engineering and plant construction for the references mentioned in industries and execution of complete projects in these areas. The Group of companies includes its own production in plant construction and mechanical engineering in the Czech Republic and Slovakia. Its products include welded parts and machining parts in the areas of waste incinerators (welding parts up to 80t - chutes, deslagger, air control), power plants, rolling mills, special plants, parts for cement plants, construction, fabrication and installation of air conditioning in plant (Refernzprojekt air piping MVA Wels Austria). Furthermore we offer: Special machine according to customer documentation, precision parts for machine tools and forming (racks supports, small items of all kinds and components assembly), textile machinery (including pre-assembled machines), agricultural machinery, storage and retrieval systems (poles, lift trucks, hoists, trolleys, completely mechanically mounted) mining equipment, frames and frame constructions and much more

We produce turned and milled parts including gears on request in several metallic materials such as brass, steel, bronze, AVP, aluminium and also copper from 0,5 mm up to 250 mm φ. Our turned parts are used in several sector such as Automotive, pharmaceutical, aeronautic and industrial in general. We largely export to several companies in all over European and we would be glad to provide our best offers to your inquiries.

The company Silcom 1991 founded and is in the automotive industry since Tatig for special purpose machines and a supplier of modules assembly lines. equipment - Incision system with Oxigas, with program control: X axis: 4000 mm Y axis: 3000 mm - Welding system MIG-MAG: maximum character stream: 450A - Circle Bandwerk for cuts: maximum cut diameter: 400 mm - Electric oven for Einsatzhärtungen, Relaxation operations Enthärtungsoperationen; maximum dimensions of treated parts: 1000mm x 600mm x 450mm. - Salt bath hardening system: maximum dimensions of treated parts: 350 mm x 150 mm x 150 mm. - Tanning system: maximum dimensions of treated parts: 800 mm x 400 mm x 200 mm. - Drilling -simple; - Radial drilling: maximum lift on the rotary arm: 1000 mm; - Koordonatenbohrmaschine: X axis: 1120 mm. Y axis: 710 mm Z axis: 630 mm. - Water pressure press with simple effect: force 100 tons. - Lathes - classic - with a processed an average of 650 mm; with a maximum length of the processed portion of 2000 mm; maximum weight of the processed part. 500 kilograms; - Lathes with program control: a processed an average of 320 mm; with a maximum length of the processed portion of 800 mm; maximum weight of the processed part. 200 kg. - Karusseldrehbänke: a processed an average of: 1100 mm with a maximum height of the processed part of: 600 mm. - Milling: horizontal axis: strokes: X axis: 900 mm Y axis: 300 mm Z axis: 300 mm vertical Aches: strokes: X axis: 900 mm Y axis: 300 mm Z axis: 250 mm Bohrwerkartig- with manual control: strokes: X axis: 850 mm Y axis: 850 mm Z axis: 700 mm -With program control: strokes: X axis: 1240 mm Y axis: 1130 mm Z axis: 800 mm - Processing center: horizontal axis: strokes: X axis: 1120 mm Y axis: 1000 mm Z axis: 960 mm vertical axis: strokes: X axis: 1325 mm Y axis: 762 mm Z axis: 600 mm - Surface grinders -Langhobelmaschine: strokes: X axis: 900 mm; Y axis: 300 mm; Maximum height of the machined part: 300 mm With turntable: Translation by Google Translate

About GEVA metalworking Quality of professionals for demanding customers - that since 1973, the company represents GEVA metalworking GmbH in Viersen. Our clients are modern machinery and highly motivated, well-trained employees. According to customer drawings we produce turned and milled parts in different batches.

Certinvest owns a mechanical workshop for the production of complex parts such as bottles blowmolds, extrusion screws and dies, injection molds parts, etc. with over 25 years of experience. The workshop is equipped with 3/5 axis machining centres, milling/turning machines, grinding machines, measuring machines, all of them with German origin (Deckel).

Polymeca AG - Passion for Precision Our performance as a general contractor for precision mechanical assemblies and parts series is based on 90 years of experience in the development and manufacture of high-precision Drehachssystemen, parts and assembly units. Thanks to modern machinery, high degree of automation, continuous process optimization and rationalization processes lived micron-precise parts are reliably at Polymeca and manufactured at competitive prices. Whether turning, milling or grinding - we perform your orders with the utmost precision and process reliability. Our international customers are very demanding. Who we want to succeed in global competition, has proven to be one Gesamtzylindrizität of less than 0.001 millimeter, can produce from 0 to 0.001 mm roundness under 0.0003 millimeters and basic games - all in series. The measurement technique has always been the foundation of the precision manufacturing - particularly in the manufacture of measuring instruments such as theodolites, measuring arms and measuring rotary tables.Polymeca dominates the measurement technology and benefiting from the Group's know-how of Leica Geosystems and Hexagon Group. Since the spin-off (from Leica Geosystems) in 1998 Polymeca has successfully established itself in the market as a contract manufacturer and outsourcing partner for precision mechanics. The value chain of the company includes the areas of manufacturing engineering, turning, milling, hard turning, grinding, honing, surface finishing, painting, measuring and fitting. This will reduce your logistics costs. Pair grinding - our new method. We tailor the internal and external cylindrical grinding exactly least from each other - in the micrometer range and prozessicher. The requirements are high. Our fully automated round and pairing grinding machines are equipped with high-precision measuring controls and correct constantly thanks trend analysis itself All additional processes are integrated into the automation. We are permanently increasing profitability. http://www.youtube.com/user/PolymecaAG

CORE COMPETENCIES: As already associated our company name, our core competence lies in the sheet metal processing. We are a job shop, whose range of services in the simple sheet-metal blank with our guillotine shear begins to go away, on the laser cutting, punching, press brake bending, and only with the welding of the parts by hand or ends with robots. In addition, this range is supplemented by various small machines and extended by partner companies (eg in the areas of machining or surface treatment. Depending on the requirements of customers, this spectrum are run partially or completely. In summary, we can say that we are a competent partner in the field of sheet metal processing. Where the sheet metal working safely begins in our home and ends, but be interposed our partner companies when necessary and coordinated by us, which increases the benefits for our customers. KNOW HOW Our knowledge in the field of sheet metal processing is the result of our long experience in this field. In the early 80s, we invested specifically in the first machines for this area and learned since then successively to. At the beginning complicated to use punching machines and manually adjustable brakes were at the forefront, today there are laser technology and CNC press brakes. These changes happened of course, not suddenly but gradually. This "relatively" slow development, but we were nevertheless build long-term sustainable skill, which is highly appreciated by our partners. Mid-90s saw the owner of the company that you can not dance at two weddings. Therefore, the area of structural steel or metal building was abandoned in favor of sheet metal technology. This specialization focuses on our core competency, which we are able to still our offer to gradually improve all resources. We would be delighted to be able to contribute our know-how in your business!

For over 50 years cogs and gears of ILMBERGER are in use worldwide. Success factors are customer focus, motivated and qualified staff, high-quality technical equipment and versatile products of the highest quality. As a medium-sized company with short decision paths we offer you the quality-oriented production of gear components.

With more than 200 engineers, technicians, masters and qualified technical specialists in the team, Dr. Hager the business of MainTech Systems. The high status of the industrial location testifies to a decades-long tradition: The location was founded in 1924 as a production facility for textile viscose yarns of the Vereinigte Glanzstoff-Fabriken AG. In 1938, the production of technical viscose yarns began, which were mainly used as a reinforcing material in the carcass of car tires. In the 1950s, fiber production was expanded to include synthetic yarns such as polyester and polyamide. Since the 70s and 80s of the 20th century, the location has increasingly developed into the most important European production facility for high-quality yarns for technical applications due to the expansion of capacities. For many decades the location in the Bavarian Lower Main was the largest employer in the region. As a result, the ICO is of central importance for the structural and economic development of the entire area to this day. In its almost 90-year history, when the parent company changed its name - from Glanzstoff to Enka, Akzo Nobel, Acordis - the name of the location also changed until 2003, when the neutral name “Industrie Center Obernburg” was chosen. The background to the last change was the split up of the previous business areas of the Acordis Group and their separate sale. The former group branches located in the ICO were converted into legally independent GmbHs. The site operating company of the ICO is "Mainsite GmbH & Co. KG", which offers all the infrastructural services required for a technological production site. In 2010, the technical services of Mainsite GmbH & Co. KG were spun off into the independently operating subsidiary Mainsite Technologies GmbH. Due to its technical competence, this company has developed into an innovative plant construction company as well as a service and maintenance company.

Make AG - quality that arrives. For over 60 years, we have confirmed ourselves as a provider of Swiss precision mechanics. We manufacture quality products to measure and according to standard, with different materials and coatings. Thanks to our own developments, the latest technology and great technical experience, our products meet the highest customer and quality standards.

Meccanica Oriente Srl is a precision mechanical workshop that has been operating in the sector for over 50 years. The main activity consists in the construction of mechanical parts related to industrial plants and machinery. The company specializes in mechanical processing for third parties, special equipment and automation systems for industries. The strengths are the use of advanced machinery and the long experience of a highly qualified staff.