We have produced some special parts that have been used on mechanisms on the automobile by CNC Lathes , INDEX Automats, and SWISS-TYPE Automatic Lathes. Some parts of car filter , special rivets , special nuts- screws , some parts of hood lock ,some parts of automobile seats are being produced at our production line.Our monthly capacity is 3 Million parts. We are using, 50 tonnes free cutting materail , 7 tonnes stainless steal , 7500 metres tube in a month.

Precision from a single source! By rotating technology, grinding, gear manufacturing and assembly. Added value of Grimm means first and foremost vertical integration. Because we offer the complete machining of a hand with turning, gearing technology, grinding and assembly in-house. Complement addition, audited and in our immediate environment is settled partner for surface finishing and heat treatment our services. This promotes flexibility and quality - and offers our customers the opportunity to use Grimm precision as a system supplier for finished assemblies. Manufacture of rotary - and gear parts with cross processing. Shot in hardened design waves, toothed, hardened and ground Schälwälz hard turned machined shafts, gears, holes. Product examples: Waves Gear parts Gear sets Assemblies Long turned parts Abstechdrehteile Verzahntechnik Installation of wheel combinations

The internationally established and run by the second generation company Max Frank GmbH & Co. KG with its headquarters in the Bavarian Leiblfing developed and its currently 13 subsidiaries, produces and sells nearly 50 years technologies for the construction industry. As a core competence in welding technology has been developed and expanded. With mesh welding machine, flash butt welding and manual welding process, we can offer you the right solution for most applications. Manufacturer Qualifications Class E - including stainless materials - and for welding rebar document our expertise. This expertise and the rapid implementation of special solutions make the company Max Frank to your partner in the field of welding technology. Our comprehensive machinery enables us to provide complete components from one source. Ample sized storage areas, as well as many years of experience in handling large contracts provide planning security. Our company is certified according to DIN EN ISO 9001:2008. This sets the stage for our consistently high quality. Despite the continuous development FRANK remains true to its values: the highest quality standards, technically integrated solutions and mutual growth with customers, suppliers and partners.

Omme gears Srl is one of the main central Italy producers of mechanical gears and which has been present in the power transmission field for more than 50 years. It is specialized in the production of gear wheels and gearboxes (cycloidal, epycicloidal and parallel axes) parts suitable for various applications and industries. Today, as yesterday, the company’s structure successfully responds to the specific production requirements and personalized customers’ projects: vast flexibility, co-engineering and short delivery lead time are the goals we are aiming to achieve maximum satisfaction of our customers. Among our clients we are proud to mention some of the leading companies in the fields of gearbox production, construction of railway vehicles, earthmoving equipment and agricultural machines, ship building industry, wind power plants, heavy industry, mining industry and others. The company operates in total autonomy on all phases of production; the production unit covers an area of 4000 mq and is composed of turning, milling, drilling (where required), gear-cutting (both external and internal), hobbing and grinding. A test room, supplied with modern electronic equipment, provides a quality control to vanguard. Highly specialized staff is able to verify the perfect conformity with the specifications by checking the progress of ongoing processes. The wide range of our products and services includes: • external straight spur gears and helical spur gears from mod. 6 to mod. 30 • internal straight spur gears up to mod. 12 • pinion shafts and splined shafts from mod. 6 to mod. 30 • tang slots and splines broaching • key seats grinding • grinding of involute profile up to mod. 22 • turning and milling, internal and external grinding • production of spare parts • design and construction of complete gear reduction units

We, the FEBU are a medium-sized company with 29 employees, and headquarters in the industrial area of Burbach – Würgendorf, plant road 19, with direct connection to the A45. The foundation of the company FEBU dates back to 1965. At that time the father of the current managing director Andreas Fey started with the production of punching, pressing and drawing tools, as well as with the production of windshield washers made of metal, in the rooms of his parents’ house. Due to the increasing demand, the constantly growing space requirements were initially met with the construction of a 150 m² production and storage hall in Burbach-Holzhausen in 1970. Due to the further steady growth of the company, the production and storage areas were moved to Burbach-Würgendorf in 1988, not least because of the favourable transport connections. Through expansions in recent years, a total of 5,350 m² of production and storage space is currently available. In the following years the product range was extended in all areas. Stamping technology With the founding of the company in 1965, the production of the first stampings for the company’s own windscreen washers and water slides began. In addition to the production of stampings for the company’s own products, other customers were quickly acquired and sales were continuously increased through constant investment in the latest machines. Thus, the most modern automatic punching machines and eccentric presses up to 200t pressure are available. For further processing, we have welding presses, automatic threading machines, as well as stud welding equipment and various special machines. Here a production can take place on tools manufactured by us or provided by you. Among steel (blank, galvanized + coated) and stainless steel we also process non-ferrous metals. Injection moulding technology With the decision of the current managing director Andreas Fey in 1993 to implement the production of plastic injection molded parts for the ice scrapers and windshield washers in house to be able to react faster and more flexibly to customer requests, he laid the foundation for the current 16 machines comprehensive injection molding production. After the purchase of the first injection moulding machine it did not take long until further articles from other areas were added and the first 2-component injection moulding machine was purchased, first for the production of the first own 2-component ice scraper, later also for further customer-specific articles. Gradually, the injection moulding production was expanded and finally, with the takeover of the company Schmidt Kunststofftechnik (founded in 1955) at the Biedenkopf-Eckelshausen location in April 2020, a second location was added. Toolmaking The in-house tool shop, with which the then founder of the company Horst Fey laid the foundation stone, is still the pillar of all production areas today. Thanks to our ultra-modern tool shop, we can react quickly and precisely to customer requirements and maintain our tools accordingly. Here we design and manufacture punching and injection moulding tools with a tool length of up to 2,000 mm, as well as fixtures and mountings for various machines. Cleaning equipment and ice scrapers The production of cleaning equipment includes the production of metal windscreen washers and water sliders, as well as the production of various plastic windscreen washers and ice scrapers. By investing in the most modern machines and developing our own products and tools, we are still able to produce competitively in this field. Since its foundation in 1965, FEBU has been able to establish itself throughout Europe. The export, also beyond the European borders, shows positive figures. Due to a manageable number of employees the company remains flexible and can react quickly to special customer requirements.

h3>PERFECTION THROUGH PRECISION/h3> Gear wheels are always part of a whole. For big units to run smoothly, the small component parts must fit perfectly and operate flawlessly. We have been bringing this kind of precision to the "micro" sector for sixty years. We manufacture little masterpieces in metal: spur gears, helical gears, crown gears, bevel gears, worms and worm gears, sprocket wheels, toothed racks and complete gearing mechanisms according to your drawings. Our speciality is precision-ground gear wheels. That requires professionalism at all levels and the most up-to-date machinery. No wonder then that our name stands for the highest possible quality at an international level. h3>YOUR RELIABLE PARTNER/h3> We are suppliers - and like our products consider ourselves a vital cog in the machine. As your reliable partner, we have high volume flexibility at our disposal, offer short throughput times and guarantee to deliver on the agreed date. All of this would be impossible without our dynamic team of around 40 people: their specialist skills and high level of motivation are our greatest asset - something we nurture and greatly appreciate. At the head of the team - and always in the thick of it as well as leading by example - is Daniel Arn, representing the third generation of his family to lead the company. He heads up a family business that has continuously modernised since it was first founded in 1946 and therefore holds a key position in the European market.

High precision, complex turning, milling and grinding parts - from 4 mm to 1,800 mm in diameter and up to a length of 2000 mm and finished assemblies, ball screws and motor spindles for the automotive, mechanical engineering, power tools, aerospace, heating and Building Construction. Manufacturing capabilities work Wertach: Turning and Dreh-/Fräsbearbeitung to Ø400mm, length up to 1000mm Milling and Fräs-/Drehbearbeitung cubic and rotationally symmetrical parts to ø1800mm, length up to 1000mm. Feinstbearbeitungstechniken * External grinding part length max 3000mm, 1000mm ø max * Internal grinding part length max 1400mm, 1000mm ø max * Spline grinding ø max 300mm, length up to 800mm * Spline grinding groove width 4mm to 40mm groove width 220mm Ømax * Surface grinding 800x400x500mm * Honing ø4 to Ø72mm Heat treatment: quenching and tempering, case hardening, carbonitriding, vacuum hardening, annealing, Kurzzeitgasnitrieren, carburizing, induction hardening and freezing Deep-hole drilling Clear Deburring Production spectrum ballscrews Diameter 12-125mm Thread length up to 3000mm Gradient of 2.5 mm to 50 mm a and mehrgänging Investment type: 2-or 4-point system Accuracy classes 1-3-5-7-10 ISO 3408 Feritungsverfahren whirled / ground Special threads on request The stiffness

Deformation of cold rolled strips with press: In the field of classical stamping production is possible on eccentric presses from 40 to 250 tons, as well as hydraulic presses up to 250 tons. The product size ranges up to about 500 mm in length and 4 mm in thickness. Fine blanking: Fine blanking is a special technology or so-called punching "without air" between the Schneidematrize and the knives (0,5 - 1,0%). This method is especially useful for highly sophisticated products in question, which are dentate different. The maximum length is about 500 mm, and the maximum width of 6 mm. This allows the tolerance of + / - 0.01 mm, a uniformity of the cut edge and the clipping with minimal needle on the edge. Drawing and deep drawing: Deep drawing is a mode of production, with the preparing various hollow shapes such as rivets, drawing dies, industrial electric parts and the like. The diameter ratio to the length is up to 1:2.5. Of course, these products have a smaller extent, forExample up to 20 mm. Screws: TKG doo manufactures screws of the small range in diameter from 2 to 6 mm and using the most advanced technology of cold deformation, which has displaced pivot screws in the world due to their cost-effectiveness. TKG provides doo screws forth in accordance with the ISO and DIN standards. We also produce special screws design according to the plans and patterns in collaboration with technologists and designers of customers. Screws can be thermally edit and galvanically protect, depending on the location and type of operation.

Unic is a medium size company (fifty employees) with more than 40 years of experience in precision machining on customer drawing as well as on standard production according to our catalog articles. The workshop has a production area of 4.500 sq.m. with a machine park that includes CNC lathe machines, transfer machines and 5 axes machining centers. The company has a noteworthy experience in machining of lot of different materials, but, the most important volumes are reached in the machining of brass,stainless steel, steel and aluminium components. Unic also purchase rough material, as brass, steel or aluminium casting. In addition to different mechanical machining we are able to offer (thanks to external cooperation) treatments and surface finishes as for instance standard or chemical nickel coating, chrome plating, brushing, anodizing, the company is then able to supply a finished product as well as mounted groups. Unic is certified according to ISO 9001:2008. Is also available a catalogue for those articles produced by themselves related to the standard production referred to standard and automatic fittings, brass and stainless steel fittings, safety valves, taps and accessorizes.

The company Brero Engineering Srl was established to meet the needs of worldwide customers in the Tochterfimen Brembomatic Srl and Brembotecnica Srl. Thanks to the support of an experienced engineering team, we are able to handle many machining processes as the prime contractor. In addition, thanks to the mutual trust and the solid partnership succeeds Brero competitive to be (in terms of quality, service and price). The company can deliver in every area of complex technologies with the support and cooperation of competent companies.

Aluminium foundry All major aluminum casting alloys Chill casting in gravity and tilt casting Sand casting HWS molding machine molding box size 850 x 650 x 250/250 mm Heat Treatment Steel shot blasting Vibratory Grinding Machining: milling to 5-axis machines and turning

We are an efficient company from Saxony with our own development and well-trained and experienced specialists in design and production. Since our foundation in 1992, the company has expanded continuously and we can refer to a large number of satisfied customers in Germany, Europe and all over the world. Convincing quality in production, extensive experience in the fields of tool making, forming processes, automation technology, special machine construction as well as apprentice training and further education are among our strengths. We manufacture mainly for the automotive and supplier industry, mechanical engineering, electronics and precision engineering, the construction industry and other industrial sectors. Translated with www.DeepL.com/Translator (free version)

MaS - Solutions offers top-notch surface finishing and industrial painting for small parts, as well as assembly of components. Our expertise in surface refinement and precise assembly processes ensures the highest quality and efficiency. Trust us to deliver your components in perfect condition and on time. We are your reliable choice for industrial solutions.

Die-cast zinc Only the standard program of "precision die casting parts" now includes as 1500 products - and there are almost daily more: Components for closure systems, components for industrial housing, supply industry, processing, assembly manufacturing Examples: Handles - troughs - case parts - Hinges - Corner connector - Fasteners - Fasteners Machining Excellent products of the highest quality: the production of complicated machining parts, components or entire modules is the most modern machinery manufacturing technology: Precision machining parts made of all materials, stainless steel turned parts, finishing, finishing by thermal and galvanic treatment, assembly manufacturing, packaging and order picking Aluminum die casting / die forging This allows the spectrum in the field of aluminum production is best described: aluminum castings, die forgings, machining, assembly manufacturing Examples: spring plate - Motor Mounts - flanges, connectors Drive Technology In the area of drive technology gears, complete axles and transmissions parts for special vehicle to be manufactured. These are our own product development as well as the extensive capabilities of the ILS manufacturing network from rapid prototyping to assembly available.

Chiarini Tornerie begun the activity in 1996 as subcontractor for precision turned parts. Thanks our continuous growth and investement, now we operate a wide range of machines and we are able to offer CNC Turning operations with very small tolerancies in small and medium size lots. We are specialized in hard turning. Diameters: from 25 mm up to 600 mm Lenght: from 10 mm to 1000 mm Materials: carbon steel, stainless steel, aluminium Chiarini Tornerie enjoys an excellent reputation with their existing customers for service and quality at competitive prices. We can assure you flexible deliveries according to your requirements and your needs.

Over 300 employees, a plant that is designed according to the latest knowledge of process control and material flow, as well as an exceptionally high level of vertical integration in line with well-trained employees ensure that the sum of skills and reliability applies at every point in the process chain. Our high-precision parts serve well-known customers from the following industries: automotive, mobile hydraulics, electrical drives, mechanical engineering, sensors, medical technology

WE WILL BE PRESENTING AT FORNITORI OFFRESI, THE MECHANICAL FAIR IN ERBA FROM 17/02 TO 19/02. YOU WILL FIND US AT PAVILION A - STAND 167 Ghioni Ingranaggi is a company based in Milan and founded in 1959. The company is specialised in the manufacture and/or processing on behalf of third parties of CYLINDRICAL GEARS with straight teeth (also INTERNAL and ALBERATED), HELICOIDAL, CONICAL, SCREWBOARDS, SCALED SHAFTS, V.S.F. COUPLES, crown wheels for SILENT CHAINS, WHEELS for ROLLER CHAINS, pulleys for toothed belts, long THREADS. To complete the range of services offered we carry out: TURNING, BROACHING, SHAPING. Thanks to consolidated experience and a specialised technical office, the company is able to produce parts to sample and solve problems that arise quickly.

Company Overview Tovicar S.r.l. is a precision mechanical workshop based in Zogno (BG), operating since 1977 and specializing in subcontract machining for demanding industrial sectors. We are experts in CNC turning, milling, mechanical assembly, and the production of custom parts based on drawings, providing tailor-made solutions for every production need. From single prototypes to medium series, we guarantee precision, punctuality, and technical support at every stage of the process. 🛠️ What We Do High-precision CNC turning and milling Mechanical assembly of components and subassemblies Rapid prototyping Machining of metal and plastic materials Dimensional inspections and quality documentation on request 🎯 Why Choose Us Over 40 years of experience Advanced machinery and technology Flexible production: from single parts to small/medium series Technical support during industrialization Reliable delivery times and quality standards 🤝 Our Customers We work with Italian and international companies in sectors such as: Industrial automation Packaging and food processing Hydraulics and pneumatics General mechanical engineering