We are your service provider in the following sectors Electron beam welding Electron beam hardening Laser welding Design meeting the requirements of electron beam welding Development of electron-beam welding equipment Electron beam welding totally annuls the classical requirements like: Same material, Same material thickness, Low heat conduction, Low content of companion elements and Low carbon content. The reason for that are the narrow deep seams and the high process speeds. Therefore, this method is not limited to standard materials but may also be successfully applied to special materials, various material combinations, thin-walled and thick-walled structures. Economic solutions are always based on designs meeting the requirements of electron beam technology since the technological advantages of electron beam engineering, weld joint testing and savings in the processing operations are combined. The clever and extremely cost-saving component design simply uses the specific features inherent to electron beam welding: Narrow weld seams due to energy input = 1% in comparison with TIG or MAG seams - resulting in minimum shrinkage and minimum distortion Narrow heat-affected zone - permits relief of welding stresses through equalisation with the elasticity of basic material

Established in 2008 in Skopje, North Macedonia, Alkup Grup began as a small family-driven business specializing in aluminium die-casting. Our initial focus was on delivering high-quality aluminium components for the automotive industry, leveraging our expertise in precision manufacturing. Over the years, we expanded our capabilities to meet the growing demands of our clients. What started as a die-casting operation gradually evolved into a full-service manufacturing hub. We introduced CNC machining, automatic sawing, powder coating, vibratory polishing, and sandblasting, among other processes. Each new capability was a response to the needs of our clients and the ever-changing landscape of modern manufacturing. Today, Alkup Grup is a trusted partner across Europe, known for our commitment to quality, innovation, and sustainability. Our journey from a small die-casting workshop to a multi-process manufacturing leader has been shaped by our dedication to excellence and our ability to adapt to new challenges. Our facility in Struga combines traditional craftsmanship with modern technology. We have invested in machinery, quality control systems, and sustainable practices, including our rooftop solar installation that powers our operations with renewable energy. At Alkup Grup, we believe in the power of collaboration. Our team of skilled professionals works closely with clients to develop innovative solutions that meet their unique needs. Whether it's a complex automotive component or a precision part for renewable energy systems, we are here to deliver what you need in the most efficient way we can.

CNC machining and conven Ionele series parts in optimal Losgrossen of 30 pcs and more. Welding parts with CNC machining to the next weight 30 kg. Bearbeitug CNC turning, Fräasen, Drilling, Schleifen.Wir can also save heat treatment and surface treatment. We process steel, STAINLESS steel, aluminum.

We are still a small garage company with 2 employees And we want to work high

We are Slovenian engineering company in the field of mechanical engineering.We are present in various sectors of the industry across Europe (Austria, Germany, Switzerland and Netherland) Our advantage is that you as our customer have only one business partner who covers the entire EX-YU market for products. We also guarantee our clients a timely delivery and the quality. of your orders.

Company: Building on a long tradition We offer technical quality products in the manufacture of welded parts and containers made of steel for industry and agriculture. Production is carried out following our own Calculations and constructions as also according to customer drawings. Our modern production facilities and enable the efficient production processes this attractive prices. We have the approvals HP0 / TRD 201 the small and the great proof of suitability according to DIN 18800-7 - DIN 18 808, the certificate Germanischer Lloyd, and our certification DIN EN ISO 9001: 2000 and DIN 6700-2. Furthermore, we have the certificates to non-destructive testing: * Level 2 penetrant testing (PT 2) * Magentpulverprüfung Level 2 (MT 2) * Leakage test (pressure, water) * Air pressure differential test Every step of our production expiration is by our quality assurance system monitored, allowing us to consistently ensure good quality for our customers. We manufacture: * Motor base frame * Welded structures for machine and equipment such as machine stand, Machine bases, press stand and parts, frames and parts for Production lines * Steel molds for casting machine beds and speaker stands and racks from mineral casting * Mobile container for strength and hazardous substances * Container for agriculture * Weldments generally

The Evocut GmbH & Co.KG was on 17/03/2011 founded by Andreas Bauer and Stephan Pertl. Through years of experience in CNC production of Andreas Bauer and experience in project business by Stephan Pertl we can already well-known companies among our customers. From the beginning, our focus is on fair and partnership with customers in the foreground. In constant dialogue with our customers, we are guided consistently on their goals and their optimal implementation. Our focus lies equally on quality, delivery and service. Perfection is our drive

NEWALU GmbH, headquartered in Delbrück and another location in Altheim, is a company specialized in the heat treatment of aluminum. Since its founding in 1998, NEWALU has established itself as a reliable partner for the automotive industry, mechanical engineering and other industrial sectors. In addition to traditional heat treatment, the company also offers mechanical processing, so that customers receive ready-to-assemble components from a single source — from individual parts to series production in various quantities. NEWALU places particular emphasis on quality, sustainability and innovative manufacturing technologies. This is reflected in important certifications such as IATF 16949, ISO 14001 and ISO 50001. At the same time, the company is pursuing a consistent sustainability strategy: CO₂ emissions are significantly reduced through the use of certified green electricity, photovoltaic systems at the Delbrück site and continuous improvements in energy and environmental management. With continuous investments in modern processing centers and expanding the value chain, NEWALU is positioning itself as an innovative service provider in the area of lightweight aluminum construction. The aim is to offer customers a combination of technological know-how, the highest quality and sustainable production processes. As a medium-sized company with regional roots but supra-regional significance, NEWALU stands for reliability, customer proximity and future-oriented solutions in the area of aluminum production.

Small engineering company with its own design department.

We are the German sales company of the KUAN YI Group. The company was founded in Taiwan in 1989 and today consists of 7 production sites with over 2,000 production machines and 1,200 employees in Asia. We take care of customs clearance and fast delivery within a few days from our production sites.

HSP Schwahlen GmbH was founded in 1945. From on 1951 the production had been focused on adapter and withdrawal sleeves being the basis of our current line. At the beginning of the eighties CNC production of goods having greater dimensions was introduced. HSP supplies all main bearing manufacturers as well as the larger distributors. The standard production range on adapter and withdrawal sleeves, nuts and locking devices is completed by optional hydraulic assistance, abnormal metric inner diameter or complete inch-sized sleeves as well as all specialties based on customer specifications. Besides this we manufacture hydraulic nuts as well as precisely turned and milled thin-walled parts. Since 2000 HSP is also manufacturing various kinds of cages for bearings from 100 - 4000 mm outer diameter in high quality, small lot sizes and variable material (brass, steel, bronze, aluminium, ...) according to customers requirements. In this segment we produce for all main bearing manufacturers. In addition to the production know-how HSP has continuously improved quality, logistics and administration. This leads to the high level of quality, delivery conditions and service of HSP. At our newly built production facility in Langenfeld, established in 2001 and in between extended several times, we manufacture with the latest technology including 3D-measuring equipment. The certification of the quality management system based on DIN EN ISO 9001 and of the environmental management system based on DIN EN ISO 14001 by Lloyd's Register Quality Assurance Limited underlines the endeavour to achieve highest possible precision and satisfaction of our customers as well as the best possible environmental sustainability.

WE-FORM unifies modern materials with innovative metal and tube forming technologies by delivering best components and modules to its customer– simply, adding value to your system. WE-FORM guides its customers from first ideation, product development, prototyping down to robust serial supplies. With headquarters in Austria and a financial sound private ownership structure, WE-FORM is a preferred partner to automotive companies and mobility system provider around the globe. With the direct integration of WE-FORM into REMUS in 2020, the „mobility“ competence is bundled and strengthened. Keywords: tube benders, tubing bender, tube bender, pipe bending, robotic welding, welding robots, welding robot, pipe bender, exhaust tube bender, tube bending, tubing benders tube forming, hydroforming, robot welding, exhaust pipe benders, pipe benders, hydraulic pipe bender, hydraulic pipe benders, hydroform, exhaust pipe bender, steel pipe bender exhaust tubing bender, tube end forming, cnc bending, bend tube, bending pipe, tube pipe bender, cnc tube bender, aluminum tube bending, bending steel tube, steel tube bending bending stainless steel tubing, stainless steel tube bending, tube bend, bending tubes, tube rolling, pipe bending services, tubing bending, cnc tube bending, copper tubing bender, copper pipe bender, cnc tubing bender, bending tubing, hydroforming process, cnc tube benders, metal tube bending, stainless tube bending, bending tube, bent tube, tube bending, companies, tubular hydroforming, tube bending services, pipe tube bending, high pressure forming, tube pipe benders, cnc pipe bender, pipe tube benders, bending tube steel, bending square tube, cnc pipe bending, tube bending cnc, forming tube, pipe bender hydraulic, tube bender hydraulic

Deformation of cold rolled strips with press: In the field of classical stamping production is possible on eccentric presses from 40 to 250 tons, as well as hydraulic presses up to 250 tons. The product size ranges up to about 500 mm in length and 4 mm in thickness. Fine blanking: Fine blanking is a special technology or so-called punching "without air" between the Schneidematrize and the knives (0,5 - 1,0%). This method is especially useful for highly sophisticated products in question, which are dentate different. The maximum length is about 500 mm, and the maximum width of 6 mm. This allows the tolerance of + / - 0.01 mm, a uniformity of the cut edge and the clipping with minimal needle on the edge. Drawing and deep drawing: Deep drawing is a mode of production, with the preparing various hollow shapes such as rivets, drawing dies, industrial electric parts and the like. The diameter ratio to the length is up to 1:2.5. Of course, these products have a smaller extent, forExample up to 20 mm. Screws: TKG doo manufactures screws of the small range in diameter from 2 to 6 mm and using the most advanced technology of cold deformation, which has displaced pivot screws in the world due to their cost-effectiveness. TKG provides doo screws forth in accordance with the ISO and DIN standards. We also produce special screws design according to the plans and patterns in collaboration with technologists and designers of customers. Screws can be thermally edit and galvanically protect, depending on the location and type of operation.

Aluminium foundry All major aluminum casting alloys Chill casting in gravity and tilt casting Sand casting HWS molding machine molding box size 850 x 650 x 250/250 mm Heat Treatment Steel shot blasting Vibratory Grinding Machining: milling to 5-axis machines and turning

The company Brero Engineering Srl was established to meet the needs of worldwide customers in the Tochterfimen Brembomatic Srl and Brembotecnica Srl. Thanks to the support of an experienced engineering team, we are able to handle many machining processes as the prime contractor. In addition, thanks to the mutual trust and the solid partnership succeeds Brero competitive to be (in terms of quality, service and price). The company can deliver in every area of complex technologies with the support and cooperation of competent companies.

Whether it is special machine construction or industrial plant, Item or series, we work according to the motto "Everything from one source". The customer does not need to worry about where he gets what, with us leaves the order as desired lacquered and ready assembled the house. This saves money, time and ultimately the customer money. Should it happen that we are unable to produce something in the company or a work step is unprofitable, we are happy to organize a third-party production. Our goals: Best quality, low cost, satisfied customer!

Axon Engineering (legal name Axon Michanologiki S.A) was founded in 1985 as a– precision Greece engineering manufacturing company. Axon employs some of the most skilled professionals in our industry combining engineering expertise and over 36 years of technical experience. Our aim is to offer our customers a complete Engineering solution by maintaining good lead times, on-time delivery, quality and reliability at competitive prices. We provide our customers all the necessary services of a "one stop shop” supporting them through the full production cycle, all the way from sourcing and manufacturing to assembly, delivery and after sales support of the products. Axon manufactures a wide range of products for companies in sectors such as aerospace, defense, electronics, naval, optics and telecommunication. One of our areas of expertise is built to print maintenance tooling, ground support equipment and fabrications for the commercial and military aerospace industry. Capabilities  Project Management  Design (CAD/CAM), R&D  CNC & Conventional Machining  Welding per ASME Section IX / EN Standards  Non-Destructive Testing / Load & Pressure Testing & Inspection  Surface Treatments & Special Finishing Processes (Nylon coating, Chromate Conversion - Alodine, Black Oxide, Phosphate, Paint)  Assembly & Special Fabrications Area  International Procurement and Delivery Quality  ISO 9001:2015 Certified by TUV Austria  AS9100 D Implemented - Certification in process  CMM Mitutoyo Romer Absolute Arm