Our customers are offered everything they need within our group of companies, all in one basket: from development and project management via the production of tools for plastic and metal fabrication, through to manufacturing the parts. In this way we closely co-operate with our customers in developing functional structural plastic and metal components on the basis of the design, thereby achieving an optimum combination between plan, design, manufacture, and cost structure. The integrated possibilities have enabled us substantially to shorten the project run up to the point of series production. The systems Pro-engineer and Catia, available to our staff, permit the creation of structural components and tools, "in one casting" as it were. Injection Moulds Our staff in the individual manufacturing areas have state-of-the-art technologies and most up-to-date machines (such as 12-wire and 15-wire cavity sinking EDM machines) at their disposal. In producing moulds with a guaranteed number of shots, especially for the automobile industry and consumer electronics, our dictum is precision and quality. This holds true for injection moulds, diecasting, duroplastic, two-component, rotating, transfer and insert/outsert moulds, just as much as it does for two-colour moulds, combinations of hard and soft plastics, automatic wire leads, in-mould decoration, and precision gear wheels. Rapid tooling with the aid of our EOS metal sintering machine M250 Extended makes it possible to produce mould inserts for injection moulds and prototype tools within a very short time. Eighty moulding machines in Vienna and Hungary, with a clamping force of between 25 and 1,100 tons, offer all the possibilities of manufacturing moulded, thermosetting and duroplast, gas-injection moulded, two-component moulded, insert and outsert moulded, as well as in-mould decoration parts. Our machines are equipped with automatic robot systems, and automatic packaging lines complement the production line. Vienna: 3-shift operation / technical products and precision parts with a mould clamping force of up to 500 tons, Hungary: 4-shift operation / technical products and design parts with a mould clamping force of up to 1,100 tons. Your plastic parts are coated in three fully automated painting lines on a water-soluble basis (single-component or two-component coating). Your metal parts are electrostatically painted, from the smallest parts up to housing coatings for consumer electronics.

Polytech-lab is a center that inherits the tradition of three generations of designers and manufacturers. Our vocation is to provide the theoretical and practical tools for the conception, engineering, implementation and testing of projects ranging from precision mechanics, component technology, industrial design, to architecture and visual arts. The experience gained in the field of traditional construction techniques is combined with a continuous process of research and experimentation aimed at innovative digital design and manufacturing technologies, while an ever-expanding network of partners allows for the organic management of the complex of different phases necessary for the materialization of the project. Indeed, the laboratory provides a network of knowledge embedded in the most important manufacturing realities of the market, matured over decades of fruitful and systematic collaboration. An overall vision of the methodological and pragmatic landscape in the field of drawing and design, together with a layered knowledge of traditional and digital fabrication techniques, passing through a genuine creative flair in the formulation of strategies and the realization of the equipment necessary for the industrialization of the project, are the factors that make Polytech-lab the ideal place to develop and realize your ideas.

Ales around industry. All dimensions, for turning, milling cutters, grinding and drilling, we are able To Offer. Welded constructions of all kinds, we are able to 30 000 kg making. Kraus, sro KŘENOVÁ 19 602 00 Brno Czech Republic Region Jihomoravsky (Česká Republika) Phone: +420537014204 Fax: +420537014207 e-mail: jaroslav.dohnal @ krausbrno.cz

Engineering is our " blood group". Our number one priority is to build relationship with bussines partners based on trust. In our field we focus on good quality work. We keep on developing and we try to take advantage of the latest trends not only in production but also in the way we manage our company. Our main strength is quick reaction to given task and AGILE solution of all processes. MACHINING We provide all services in this field. We are prepared for custom-made production and small series production. Machining of steel parts, parts aluminum alloys and stainless steel is our main focus. Providing we will be able to do some operation by ourselves, we will address our partners and get the task done. As for machining of more specific shaped plastic product we are no so experienced and therefore we use approved professionals. Due to modern work management, we are able to reach short delivery times. 100% identification and control of exported parts is the most important operation for us. CUTTING We are experts in shaped parts. We offer laser, plasma and flame cutting. We stock common grades of material, but if the customer has any special request we will try to accommodate him. We are able to arrange water jet cutting. We prefer cutting of aluminum alloys and stainless steel with this technology. We can offer different types of marking parts, for example laser marking and dot peen plate marking. BENDING We enjoy unusual bending . We are equipped by a lot of bending tools. We bend plates up to 15mm, but we are able to arrange bending of thicker material with our partners. We are experienced in design bending without trace of tools mainly for food industry. We are able to bend up to 4 meter long part with thickness of 6mm. WELDING We are focused on MIG/MAG/TIG technology welding. We use precision welding tables which are equipped with many clamping tools. We have no problem with steel constructions, water seal tanks, robot frames atc. We are able to weld smaller parts as well as massive steel construction up to 3 tons. We have a lot of experience with weldments for food industry. We can provide some leak test for example helium test, pressure test and capillary test. We also have some experience with aluminum welding. I the end of this process we run a visual quality check of welds to achieve the best result. SURFACE TREATMENT We can provide bead blasting and glass or ceramic blasting of different parts. We cooperate with partners in galvanizing, hot dip galvanizing and bluing. We are able to provide powder coating of all shades of RAL. We can offer powder coating of small parts as well as huge weldments to maximum weight of 3 HEAT TREATMENT Heat treatment is used mostly to reached to required mechanical and technological properties of metal parts. For this technology we use our professional partners. We offer steel tempering, annealing, hardening, cementation and nitrided.tuns. We are ok with part by part or 1000 pcs series. We can provide anodizing, chromeplating and wet painting.

Wing GmbH a medium-sized family business in the heart of Saxony, on a regional basis, at home in the world of construction: the steel and metal over the surface coating through to CNC controlled laser cutting and tube bending. The wings GmbH is a family business with over 150 years of tradition in metal processing, on the safe base successfully developed structures and years of experience, personally and individually in the care for smaller projects, powerful in the implementation of major projects. The company is based in Oschatz, in the center of the region between Dresden, Leipzig and Chemnitz, offers ideal conditions for the production and manufacture. The nearby access to the BAB 14 could guarantee affordable Directions for customers and suppliers. The wings GmbH offers comprehensive services. The range of structural steel manufactures, supplies and installs steel structures such as steel buildings and structures, steel bridges, stairways and special designs for the commercial and private sectors.In the field of metal we focus on railing for indoor and outdoor use, screen walls, noise barriers and shock protection systems, of course, also in combination with glass, plastic or wood. With the company's own powder coating facility, the produced components are coated in the company. Of course we offer powder coating as a service. The performance of different coating needs, with short processing and delivery deadlines are our trademarks. The coating of components up to 7500 mm in length and weighing up to 1 ton is possible. For own production, but of course also in wage performance, we cut with a modern Bystronic laser cutting machine components with a maximum length of 6500 mm and a width of up to 2500 mm. Can be cut are sheet metal thickness up to 25 mm. Indispensable for the railing manufacturing is our modern CNC pipe bending machine. Customer requirements can be quickly and individually satisfied.Tubes 5-76 mm in diameter and a total length of 6000 mm can be bent. The wings GmbH has its own design department. We are thus able to realize individual customer wishes to turn ideas and concepts into concrete production plans and customers comprehensive consulting services. Our own engineering allows short processing times and optimal preparation for assembly. The more complex the construction project, the more important is a partner you can rely on. A partner who knows how to combine the desire of the owners and the ideas of the architect economically. A partner of the security. A partner like the wings GmbH.

We master the entire metalworking value chain, from development to in-house prototyping to series production. In doing so, we combine customer proximity and partnership with know-how, experience and innovative strength. Our strength lies in the combination of engineering expertise, precise prototyping and high-quality series production.

1. Deep technical understanding: We understand machines, tools and materials down to the last detail. Whether milling, turning, 3 or 5-axis machining — we understand the processes, know what is technically feasible, and find solutions for complex requirements. 2. High precision & quality awareness: Years of work in the CNC sector have trained us to comply with even the smallest tolerances. We do not simply work “from drawing”, but with a trained eye for quality and dimensional accuracy. 3. Experience with different materials: Whether aluminum, stainless steel, plastic or titanium — we know how different materials behave and how to process them economically and efficiently. 4. Efficiency & optimization: We recognize potential for optimising set-up times, processing strategies and tool paths. Our knowledge saves time, costs — and increases productivity. 5. Dealing with CAD/CAM systems: We worked with programs such as SolidCAM, Mastercam, Fusion 360, Siemens NX or Heidenhain — 6. Reliability & independence: CNC manufacturing is about responsibility — we have proven over the years that we work independently, meet deadlines and think along with us. 7. Problem solving skills: When a tool breaks, a dimension doesn't fit, or a program causes problems, we find pragmatic solutions — often directly on the machine. 8. Teamwork & transfer of knowledge: I have often passed on my know-how to colleagues or trainees and can work in a team in a calm and solution-oriented manner even in stressful situations.

TecSell Business Solutions is your ideal partner in almost all areas of engineering services, procurement of machines and systems and in the production of drawing parts. We achieve a high level of customer satisfaction with the vision of bringing high quality to our customers at the best possible price. The smooth execution of our projects with project management standards enables successful cooperation with our customers. Our competent employees advise and support you in every phase of the project, from development to production. Thanks to our comprehensive services, we are able to offer our customers the best service from a single source. This lays the foundation for achieving our common goals.

Housing and apparatus construction Sheet metal processing, 2-D laser cutting Plant construction We work internally with SAP, Solidworks, Autocad