The focus of the entrepreneurship in the SCHERDEL Group on people. In this case, the social commitment to the employees is the same as the relationships with customers, suppliers, service providers or partners. The recognition of individual performance, the granting of decision-making spaces that will encourage initiative and creativity, the opportunity for optimal education and training form the basis of a corporate philosophy that counts on traditional values and the cornerstone carry moral and ethical principles. The six corporate objectives are: 1 Customer satisfaction 2 Employee satisfaction 3 Innovation 4 Expansion of market shares 5 Protecting the environment 6 Return on capital employed

Specialist for production of small series in the field of sheet metal processing with numbers from 1 to 5000 Flexible production controlled by using the latest CNC machines Low tooling costs, if any as a result: Simple implementation of customer requirements Personal advice in the design to production Cost savings Flexible and fast order processing

We are suppliers for industry and trade. Our manufacturing capabilities are: CNC plasma cutting, sawing, punching, drilling, tapping, turning, welding MIG MAG TIG ... Products: Weldments and Parts according to customer requirements in the areas of steel construction, mechanical engineering and special engineering such as machine frames, machine frames, steel structures, consoles, construction from waste water technology and water treatment etc. We mainly steel and stainless steel. CNC - plasma cutting: * Up to 30mm thickness * Available in steel and stainless steel * Cutting range max. 3000 x 1500 mm * Blanks (also possible cuts by argon-hydrogen) by means of technical gases for optimum cutting quality * Programming in accordance with templates and sketches * Reading drawings in DXF - format Stamping, conventional: * Steel up to 40mm diameter 20mm in thickness * Stainless steel Diameter 24mm to 15mm in thickness Drilling, tapping: * Drilling up to diam.35mm * Tapping up to M20 Turning, conventional: (Clamped inside) * Max workpiece diameter D = 600mm * Maximum workpiece diameter D = 300mm (outside cocked) Saws: * Round up to diameter 240mm * Flat to 300mm width Welding: * MIG / MAG * Component manufacture according to drawing * Maximum part weight: 500Kg

We are service providers in contract manufacturing of metal parts, ... Our manufacturing capabilities: + Laser cutting up to 25 mm in steel + Laser cutting up to 15 mm in stainless steel + Laser cutting up to 10 mm in aluminum + Folding + Curl up to 1500 mm in length, from ø 90 mm + Grind surfaces + Welding + Locksmith, lighter steel construction + Clinching fasteners + Machining (countersinking, thread, ...) + CNC - Turning diameter up to 65 mm + CNC - milling up to 900 * 500 * 500 mm + Component Manufacturing + Production Technical Special Tasks + ... We manufacture series and individual components A team of 25 qualified employees in their service! Among our strengths: + Expertise + Reliability + Customer orientation + Reaction speed - short delivery times What we additionally distinguished: + Most modern machinery + Know-how in production technology + Cheap prices due to optimized cost + The ability to design your parts + Design support for production-technical and cost-related optimization + Vertical integration to customer from single-step to the complete manufacture &Surface + Existing logistics to surface processes such as painting, electroplated galvanized, hot dip galvanizing, + Prioritized production orders - if time plays a major role + Possibility to accommodate our fleet vehicles, delivery service, or pickup

Perfection in steel and plant construction The SAB Barth GmbH can look a long and rich history. The origin of the company as a machine factory and iron foundry dates back to the year 1872. A key milestone in the development of the company was in 1998 taken over by the EMF group Nienburg. With new businesses and markets in the food industry, container and equipment and in the steel and stainless steel processing. Extensive investment in the latest machinery (eg CNC controlled milling machines, lathes, precision laser cutting systems for stainless steel, Jig) and equipment, new production lines and a certified quality management system are the basis of our success. The focus of the SAB - business activities are the steel and stainless steel processing in the main business areas Structural steel construction, welded constructions, container, apparatus, fixture for the maritime industry, handling equipment and contract manufacturing. We manufacture a system supplier with highest standards and on time eg for maritime industry, mechanical engineering, plant construction, container, steel, freezer, Frostertechnik, food industry, food industry, slaughterhouses, fish meal plants and waste treatment plants.

The MGT machinery and equipment GmbH, headquartered in New Wokern (Mecklenburg-Vorpommern) is specialized in the course of its 22-year existence on the development and production of complex welded assemblies. Many years of experience in the machining of steels of all types (construction, stainless, armor, manganese steel, etc.) as well as the technological know-how, our 80 qualified employees speak for themselves. With us you get on demand from a single source: development, design, manufacture (including for painting and coloring), assembly and logistics. Our high quality, meeting delivery times and a fair price-performance ratio convince companies in the defense and railway industries to logistics companies and public authorities. Of course, we have in addition to the certification according to DIN EN ISO 9001 and 14001 on the information requested in the respective industries welding approvals.

Tehnomat Inginerie Industriala is a Romanian company located in Cluj-Napoca, it was founded in 1998 and our activity is structered to designs and manufacturing assembly line. specials machines and stations for automotive industry.

Special processing in machining (CNC turning and milling). Even the most difficult requirements are met with the latest technology. Our strength lies among others in the machining of difficult to cut, high-alloy and high-temperature nickel-based materials and other special materials such as steels, eg. V4A, duplex stainless steels and titanium alloys. In addition, we also include the processing of pre-hardened steel with 60 HRC and more in the form of hard turning our strengths. As well as the production of small holes from 0.1 mm (nozzle manufacturing) in all steels, stainless steels and nonferrous metals! The basis for this is not only the necessary know-how, but also the right tools and their proper use. Through constant contact with well-known tool vendors, we always work with the latest material to the appropriate tools and machines. All operations and workflows based on years of experience - Precision and flexibility are self-evident. Then rely on our customers for years! Translation by Google Translate

For over 10 years design, manufacture and assemble structures, pipelines, manhole covers, stairs, etc. made of stainless steel and steel, mainly for water and sanitation activities. The stainless steel lining of potable water tanks complements the portfolio. The production range of stainless steel is carried out in a separate hall for a clear separation to ensure with ferritic steels. All products made of stainless steel will get a mechanical, chemical or electrochemical surface treatment. On request of the customer also receives bead blasted surfaces. Pipes made of stainless steels are basically "formed" and pickled in a pickling bath and passivated. Customer focus, punctuality, steady quality improvement, introduction of new products / services in our offer as well as the conservation of natural resources of our environment determine what we do. We know that qualified and motivated employees the most important resource for the successful fulfillment of our tasks. Our top business principles are customer focus and quality. All our products and services are based on these values in the design, implementation and warranty. With all our clients, customers, consultants and partners, we strive for a trusting, fairness and integrity cooperation. We are confident that our custom alignment is an important foundation to build confidence. Compliance with existing laws and regulations in the provision of our services is one of the foundations of our identity. We document to develop workplace Our employee orientation unremitting endeavor, efficiency and effectiveness. Healthy and motivated employees are a prerequisite for our competitiveness. Training and continuing education have a high priority. This is a way by which we secure the jobs of our employees. It is our belief that the provision of high quality products and / or services in the fields of steel, metal and plant quality objectives and apply quality management methods and - are measures essential.This we manifest our factory production in accordance with DIN EN ISO 3834-2.

LDS GmbH your partner for sheet metal and tube forming High quality standards, modern machinery and highly motivated people with a passion for their profession are the basis of success of our work. Thus, we are able to respond flexibly to the diverse requirements of our customers. Enjoyed on your own. The Hülsmann Laser GmbH is a young company, founded in 1999, arising from the Hülsmann Stainless GmbH & Co. KG.

Design of components Producing Bauteilenaus steel, stainless steel, aluminum building construction Metal Doors, windows, post and beam construction Glasbau Welding acc. EN1090 with certified welders Translation by Google Translate

Kupmet produces sheet metal components and weld assemblies as Tier 1 and Tier 2 supplier to industries such as manufacturing of commercial vehicles, busses agricultural machines, stoves, electrical and healthcare devices, furniture, .. Clients are based in Benelux, Germany, Hungary We are customer focused and cost minded.

We had established Jinhua Jianchuang Metal Tools Co., Ltd. in 2005. The whole management team had worked in German manufacturing company in China for over 8 years. The European style of management and high quality has taken root in our company. We specialize in OEM products of sheet metal parts and MIG/MAG & TIG welding parts, including metal spare parts, sub assembly and whole assembly unit. All the products have been exported to the USA and Europe. We value long term relationship with our customers. Your success makes us successful.

We offer first-class work in many areas of metal processing. Our Stäerken are the discreet handling their project Many years of professional experience and the confidence of several well-known companies. In 1870 the company was gegrüendet as hoof and car manufacturer continued in 1933 as a blacksmith, locksmith Hans Glocker 1950 Anton Kleiner üebernahm operation 1968 Willfried Glocker owner of the company 2014 Leopold Bischof takes over operation As you see, we can proudly say we have been now five generations of one family gefüehrter in manual mode.

KAROVIČ oceľová výroba, s.r.o. with its registered office in Lozorno was established in 2009 as a company active in sheet metal processing in particular. Thanks to the quality work of the entire team and the use of state-of-the-art technologies aimed at achieving supreme quality and flexibility, we offer a complex service in this field to our customers. In the course of our operation on the market, we have expanded our operations to include mechanical engineering and locksmith production in order to offer improved quality service. Nowadays, we offer a professional service in the field of sheet metal processing, stainless steel production for the food industry, structure welding, engineering and design works. The company’s priority is to meet the most demanding customer requirements from the time an order is received up until its completion, while focusing on speed, quality, flexibility and economy. These objectives are reached thanks to continuous process improvement, technology modernisation, machinery expansion and by raising the entire team’s qualifications.

MTC Group is located in Fabriano, Italy and is composed by 2 business divisions: MTC for sheeht metal stamping dies and ARA for welding and automation systems in the automotive and home appliances sectors. MTC (ww.m-centro.it ) designs and manufactures progressive and transfer dies up to 5 m length and 2 m width for manufacturing structural, suspension and seat parts in standard, high-strength steels, DP with thickness ranging from 0,3 to 2,5 mm. Design with CATIA V5, try-out and optimization are made in-house. We have 2 mechanical try-out presses of 500 and 1000 tons. Our customers are OEMs and Tier 1s worldwide. ARA (www.ararobot.it) designs and manufactures robotized welding cells and customized industrial automation. T

Nordic Gruppen was created in 2012 as custom steel and glass element producer with philosophy - everything under one roof. We take care of every step in the process from designing and structural calculations to production and logistics. We have our departments in Sweden and Norway, where we also install all our products, while the sales expand to entire Scandinavian countries as well as Iceland, Germany and Switzerland. With big range of custom & standard products and services available, we eliminate the need of having too many subcontractors and suppliers on construction sites.

Veltech is an engineering & manufacturing company located in Turkey. With its wide variety of technologies (Machining, turning, welding, coating, sheet metal processing and Heat treatment) on its machine park, Veltech is an AS9100 certified supplier of Aerospace & Automotive companies.

As Hakser Laser, we have been serving as a leading company in the metal sector since 1997 in Bursa. Our company provide services for Automotive, Construction, Auto Interior Design, Outdoor Advertising, Packaging Industry, Food Industry, Iron Joinery, Textile, Furniture, Architecture, Interior Architecture, Auto Supply Industry, Industrial Design, Insulation, Heavy Industry, Industrial Industry and Sub-Industries, Ship and Yacht Industry, Mold Industry, All Machinery Production Industry, Steel Construction, Crane Industry, Elevator Manufacturing and Spare Parts Industry, Ventilation Air Conditioning Industry. We respond to your needs such as laser cutting, press brake bending, cutting, bending, welding and robot bending for your sensitive processes. We are in the process of developing new collaborations abroad for our company, which is the leader in the market. We have a strong team of 36 people qualified to meet all your needs in the metal sector.